After booting, you will be prompted to complete the configuration of
your basic system, and then to select what additional packages you
wish to install. The application which guides you through this
process is called base-config. Its concept is
very similar to the debian-installer from the first stage. Indeed,
base-config consists of a number of specialized
components, where each component handles one configuration task,
contains “hidden menu in the background” and also uses
the same navigation system.
If you wish to re-run the base-config at any
point after installation is complete, as root run
base-config.
After a welcome screen, you will be prompted to configure your time zone. First select whether the hardware clock of your system is set to local time or Greenwich Mean Time (GMT or UTC). The time displayed in the dialog may help you decide on the correct option. Systems that (also) run Dos or Windows are normally set to local time. If you want to dual-boot, select local time instead of GMT. This question will not be asked if Ubuntu is the only operating system installed on your computer; base-config will then simply default to UTC.
Depending on the location selected at the beginning of the installation process, you will next be shown either a single timezone or a list of timezones relevant for that location. If a single timezone is shown, choose to confirm or choose to select from the full list of timezones. If a list is shown, select your timezone from the list, or select Other for the full list.
The system will ask you whether you wish to create an ordinary user account at this point. This account should be your main personal log-in.
The account you create at this point will be given root
privileges by means of the sudo command, and the root
account itself will have login disabled. If you wish, you can enable the
root account later by setting a password for it with the command
sudo passwd root.
You should not use the root account for daily use or as your personal login, nor should you use sudo except when root privileges are really required.
Why not? Well, one reason to avoid using root's privileges is that it is very easy to do irreparable damage as root. Another reason is that you might be tricked into running a Trojan-horse program — that is a program that takes advantage of your super-user powers to compromise the security of your system behind your back. Any good book on Unix system administration will cover this topic in more detail — consider reading one if it is new to you.
You will first be prompted for the user's full name. Then you'll be asked for a name for the user account; generally your first name or something similar will suffice and indeed will be the default. Finally, you will be prompted for a password for this account.
If at any point after installation you would like to create another account, use the adduser command.
The main means that people use to install packages on their system is
via a program called apt-get, from the
apt package.[6]
Other front-ends for package management, like aptitude,
synaptic and the older dselect also
use and depend on apt-get. These front-ends are recommended
for new users, since they integrate some additional features (package
searching and status checks) in a nice user interface.
APT must be configured so that it knows where to retrieve packages from. The helper application which assists in this task is called apt-setup.
The next step in your configuration process is to tell APT where other
Ubuntu packages can be found. Note that you can re-run this tool at
any point after installation by running apt-setup,
or by manually editing /etc/apt/sources.list.
If an official CD-ROM is in the drive at this point, then that CD-ROM should automatically be configured as an apt source without prompting. You will notice this because you will see the CD-ROM being scanned.
For users without an official CD-ROM, you will be offered an array of choices for how Ubuntu packages are accessed: FTP, HTTP, CD-ROM, or a local file system.
You should know that it's perfectly acceptable to have a number of different APT sources, even for the same Ubuntu archive. apt-get will automatically pick the package with the highest version number given all the available versions. Or, for instance, if you have both an HTTP and a CD-ROM APT source, apt-get should automatically use the local CD-ROM when possible, and only resort to HTTP if a newer version is available there. However, it is not a good idea to add unnecessary APT sources, since this will tend to slow down the process of checking the network archives for new versions.
If you plan on installing the rest of your system via the network, the
most common option is to select the http
source. The ftp source is also acceptable, but
tends to be somewhat slower making connections.
The next step during the configuration of network package sources is to tell apt-setup which country you live in. This configures which of the official Ubuntu Internet mirrors you will connect to. Depending on which country you select, you will be presented with a list of possible servers. It's generally fine to pick the one at the top of the list, but any of them should work. Note however that the mirror list provided by the installation was generated when this version of Ubuntu was released and some mirrors may no longer be available.
After you have selected a mirror, you will be asked if a proxy server should be used. A proxy server is a server that will forward all your HTTP and/or FTP requests to the Internet and is most often used to regulate and optimize access to the Internet on corporate networks. In some networks only the proxy server is allowed access to the Internet, in which case you will have to enter the name of the proxy server. You may also have to include an user name and password. Most home users will not need to specify a proxy server, although some ISPs may provide proxy servers for their users.
After you select a mirror, your new network package source will be tested. If all goes well, you will be prompted whether you want to add another package source. If you have any problems using the package source you selected, try using a different mirror (either from your country list or from the global list), or try using a different network package source.
Unless you booted the installer using the server
option, base-config will now automatically install the
set of packages that make up the Ubuntu desktop. A few questions may be
asked during this process in case the X Window System configuration tools
are unable to automatically detect your keyboard layout, graphics card, or
optimum screen resolution.
Aptitude is a modern program for managing packages. aptitude allows you to select individual packages, set of packages matching given criteria (for advanced users), or whole tasks.
The most basic keybindings are:
| Key | Action |
|---|---|
| Up, Down | Move selection up or down. |
| Enter | Open/collapse/activate item. |
| + | Mark package for installation. |
| - | Mark package for removal. |
| d | Show package dependencies. |
| g | Actually download/install/remove packages. |
| q | Quit current view. |
| F10 | Activate menu. |
For more commands see the online help under the ? key.
Each package you selected with tasksel or aptitude is downloaded, unpacked and then installed in turn by the apt-get and dpkg programs. If a particular program needs more information from the user, it will prompt you during this process. You might also want to keep an eye on the output during the process, to watch for any installation errors (although you will be asked to acknowledge errors which prevented a package's installation).
[6] Note that the actual program that installs packages is called dpkg. However, this package is more of a low-level tool. apt-get is a higher-level tool as it will invoke dpkg as appropriate and also because it knows to install other packages which are required for the package you're trying to install, as well as how to retrieve the package from your CD, the network, or wherever.