Go to the source code of this file.
Defines | |
#define | MCE_SERVICE "com.nokia.mce" |
The MCE DBus service. | |
#define | MCE_REQUEST_IF "com.nokia.mce.request" |
The MCE DBus Request interface. | |
#define | MCE_SIGNAL_IF "com.nokia.mce.signal" |
The MCE DBus Signal interface. | |
#define | MCE_REQUEST_PATH "/com/nokia/mce/request" |
The MCE DBus Request path. | |
#define | MCE_SIGNAL_PATH "/com/nokia/mce/signal" |
The MCE DBus Signal path. | |
#define | MCE_ERROR_FATAL "com.nokia.mce.error.fatal" |
The MCE DBus error interface; currently not used. | |
#define | MCE_ERROR_INVALID_ARGS "org.freedesktop.DBus.Error.InvalidArgs" |
The DBus interface for invalid arguments; currently not used. | |
#define | MCE_DEVICE_MODE_GET "get_device_mode" |
Request device mode. | |
#define | MCE_DEVLOCK_MODE_GET "get_devicelock_mode" |
Request device lock mode. | |
#define | MCE_TKLOCK_MODE_GET "get_tklock_mode" |
Request touchscreen/keypad lock mode. | |
#define | MCE_DISPLAY_STATUS_GET "get_display_status" |
Request display status. | |
#define | MCE_INACTIVITY_STATUS_GET "get_inactivity_status" |
Request inactivity status. | |
#define | MCE_VERSION_GET "get_version" |
Request MCE version. | |
#define | MCE_DISPLAY_ON_REQ "req_display_state_on" |
Unblank display. | |
#define | MCE_PREVENT_BLANK_REQ "req_display_blanking_pause" |
Prevent display from blanking. | |
#define | MCE_DEVICE_MODE_CHANGE_REQ "req_device_mode_change" |
Request device mode change. | |
#define | MCE_TKLOCK_MODE_CHANGE_REQ "req_tklock_mode_change" |
Request tklock mode change. | |
#define | MCE_TRIGGER_POWERKEY_EVENT_REQ "req_trigger_powerkey_event" |
Request powerkey event triggering. | |
#define | MCE_POWERUP_REQ "req_powerup" |
Request powerup. | |
#define | MCE_REBOOT_REQ "req_reboot" |
Request reboot. | |
#define | MCE_SHUTDOWN_REQ "req_shutdown" |
Request shutdown. | |
#define | MCE_DEVLOCK_VALIDATE_CODE_REQ "validate_devicelock_code" |
Validate device lock code. | |
#define | MCE_DEVLOCK_CHANGE_CODE_REQ "change_devicelock_code" |
Change device lock code. | |
#define | MCE_ALARM_MODE_CHANGE_REQ "set_alarm_mode" |
Set alarm mode. | |
#define | MCE_SHUTDOWN_SIG "shutdown_ind" |
Notify everyone that the system is about to shut down. | |
#define | MCE_THERMAL_SHUTDOWN_SIG "thermal_shutdown_ind" |
Notify everyone that the system is about to shut down due to thermal constraints. | |
#define | MCE_DEVLOCK_MODE_SIG "devicelock_mode_ind" |
Signal that indicates that the device lock mode has changed. | |
#define | MCE_TKLOCK_MODE_SIG "tklock_mode_ind" |
Signal that indicates that the touchscreen/keypad lock mode has changed. | |
#define | MCE_DATA_SAVE_SIG "save_unsaved_data_ind" |
Notify everyone to save unsaved data. | |
#define | MCE_DISPLAY_SIG "display_status_ind" |
Notify everyone that the display is on/dimmed/off. | |
#define | MCE_INACTIVITY_SIG "system_inactivity_ind" |
Notify everyone that the system is active/inactive. | |
#define | MCE_DEVICE_MODE_SIG "sig_device_mode_ind" |
Notify everyone that the device mode has changed. | |
#define | MCE_HOME_KEY_SIG "sig_home_key_pressed_ind" |
Notify everyone that the home button was pressed (short press). | |
#define | MCE_HOME_KEY_LONG_SIG "sig_home_key_pressed_long_ind" |
Notify everyone that the home button was pressed (long press). | |
#define | MCE_ACTIVATE_LED_PATTERN "req_led_pattern_activate" |
Activates a pre-defined LED pattern Non-existing patterns are ignored. | |
#define | MCE_DEACTIVATE_LED_PATTERN "req_led_pattern_deactivate" |
Deactivates a pre-defined LED pattern Non-existing patterns are ignored. | |
#define | MCE_ENABLE_LED "req_led_enable" |
Enable LED; this does not affect the LED pattern stack Note: The GConf setting for LED flashing overrides this value If the pattern stack does not contain any active patterns, the LED logic will still remain in enabled mode, but will not display any patterns until a pattern is activated. | |
#define | MCE_DISABLE_LED "req_led_disable" |
Disable LED; this does not affect the LED pattern stack. |
This file is part of mce-dev
Copyright (C) 2004-2006 Nokia Corporation.
These headers are distributed in the hope that they will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this software; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
Activates a pre-defined LED pattern Non-existing patterns are ignored.
|
|
Set alarm mode.
|
|
Notify everyone to save unsaved data.
|
|
Deactivates a pre-defined LED pattern Non-existing patterns are ignored.
|
|
Request device mode change.
|
|
Request device mode.
|
|
Notify everyone that the device mode has changed.
|
|
Change device lock code.
|
|
Request device lock mode.
|
|
Signal that indicates that the device lock mode has changed.
|
|
Validate device lock code.
|
|
Disable LED; this does not affect the LED pattern stack.
|
|
Unblank display.
|
|
Notify everyone that the display is on/dimmed/off.
|
|
Request display status.
|
|
Enable LED; this does not affect the LED pattern stack Note: The GConf setting for LED flashing overrides this value If the pattern stack does not contain any active patterns, the LED logic will still remain in enabled mode, but will not display any patterns until a pattern is activated.
|
|
Notify everyone that the home button was pressed (long press).
|
|
Notify everyone that the home button was pressed (short press).
|
|
Notify everyone that the system is active/inactive.
|
|
Request inactivity status.
|
|
Request powerup.
|
|
Prevent display from blanking.
|
|
Request reboot.
|
|
Request shutdown.
|
|
Notify everyone that the system is about to shut down.
|
|
Notify everyone that the system is about to shut down due to thermal constraints.
|
|
Request tklock mode change.
|
|
Request touchscreen/keypad lock mode.
|
|
Signal that indicates that the touchscreen/keypad lock mode has changed.
|
|
Request powerkey event triggering.
|
|
Request MCE version.
|