# changelog

author: Dave Allan <dallan@redhat.com> - 0.8.1-11
changelog:
  - Do not block during incoming migration
  - Resolves: rhbz#579440
  - Label serial devices
  - Resolves: rhbz#585249
  - parthelper: fix compilation without optimization
  - Related: rhbz#593785
  - Fix name/UUID uniqueness checking in storage/network
  - Resolves: rhbz#593951
  - Don't squash file permissions when migration fails
  - Resolves: rhbz#607922
  - Properly handle 'usbX' sysfs files
  - Resolves: rhbz#603867
  - add pool support to vol-key command & improve vol commands help
  - Resolves: rhbz#598365
  - document attach-disk better
  - Resolves: rhbz#601143
  - Config iptables to allow tftp port if network <tftp> element exists
  - Resolves: rhbz#607294
  - Fix failure to generate python bindings when libvirt.h.in is updated
  - Related: rhbz#589465
  - Allow all interface names
  - Resolves: rhbz#593907
  - Fix nodedevice refcounting
  - Resolves: rhbz#608753
  - Move nwfilter functions inside extern C and fix a locking bug
  - Resolves: rhbz#597391
  - Fix failure to restore qemu domains with selinux enforcing
  - Resolves: rhbz#590975
  - Check for presence of qemu -nodefconfig option before using it
  - Resolves: rhbz#608859


author: Dave Allan <dallan@redhat.com> - 0.8.1-12
changelog:
  - Don't invoke destroy callback from qemuMonitorOpen() failure paths
  - Resolves: rhbz#609060
  - virFileResolveLink: guarantee an absolute path
  - Resolves: rhbz#608092
  - SPICE patches have translatable strings without format args
  - Resolves: rhbz#608917
  - No way to pass disk format type to pool-define-as nor pool-create-as
  - Resolves: rhbz#597790
  - Fix enforcement of direction of traffic for rules describing incoming traffic
  - Resolves: rhbz#606889
  - Clarify virsh help pool-create-as text
  - Resolves: rhbz#609044


author: Dave Allan <dallan@redhat.com> - 0.8.1-14
changelog:
  - Support virtio disk hotplug in JSON mode
  - Resolves: rhbz#573946
  - Fix QEMU monitor JSON crash
  - Resolves: rhbz#604585
  - CVE-2010-2237 CVE-2010-2238 CVE-2010-2239
  - Resolves: rhbz#607817
  - CVE-2010-2242 Apply a source port mapping to virtual network masquerading
  - Resolves: rhbz#608049
  - Fix hang if QEMU exits (almost) immediately
  - Resolves: rhbz#610056
  - Support new CPU models provided by qemu-kvm
  - Resolves: rhbz#605830
  - Fix comparison of two host CPUs
  - Resolves: rhbz#611401
  - Don't mess with the CPU returned by arch driver
  - Resolves: rhbz#613014
  - Fail when CPU type cannot be detected from XML
  - Resolves: rhbz#613760
  - Use -nodefconfig when probing for CPU models
  - Resolves: rhbz#613764
  - cpuCompare: Fix crash on unexpected CPU XML
  - Resolves: rhbz#613765
  - Properly report failure to create raw storage volume files
  - Related: rhbz#547543
  - Fix IOErrorReasonCallback python bindings
  - Related: rhbz#586353
  - Parthelper: canonicalize block device paths
  - Related: rhbz#593785


author: Dave Allan <dallan@redhat.com> - 0.8.1-16
changelog:
  - Make PCI device ordering consistent with older releases
  - Resolves: rhbz#592026
  - Fix libvirtd hang during concurrent bi-directional migration
  - Resolves: rhbz#599590


author: Dave Allan <dallan@redhat.com> - 0.8.1-17
changelog:
  - Set a stable & high MAC addr for guest TAP devices
  - Resolves: rhbz#616517
  - Fix bogus commit of -16 patches
  - Related: rhbz#592026
  - Related: rhbz#599590


author: Dave Allan <dallan@redhat.com> - 0.8.1-19
changelog:
  - Add character device backend activating QEMU internal spice agent
  - Resolves: rhbz#615757
  - Make libvirt-guests initscript Fedora compliant
  - Resolves: rhbz#617300


author: Dave Allan <dallan@redhat.com> - 0.8.1-21
changelog:
  - Fix multiple PCI device assignment bugs
  - Resolves: rhbz#617116
  - Fix the ACS checking in the PCI code
  - Resolves: rhbz#615218
  - Disable boot=on when not using KVM
  - Resolves: rhbz#594068
  - Don't leak delay string when freeing virInterfaceBridgeDefs
  - Resolves: rhbz#620837


author: Dave Allan <dallan@redhat.com> - 0.8.1-22
changelog:
  - Mitigate asynchronous device_del
  - Resolves: rhbz#609437
  - Fix PCI address allocation
  - Resolves: rhbz#618484
  - Make nodeinfo skip offline CPUs
  - Resolves: rhbz#622515


author: Daniel Veillard <veillard@redhat.com> - 0.8.1-25
changelog:
  - fix PXE booting on the virtual network
  - Resolves: rhbz#623951
  - fix tunelled migration
  - Resolves: rhbz#624062


author: Dave Allan <dallan@redhat.com> - 0.8.1-26
changelog:
  - Fix problem with capabilities XML generation
  - Resolves: rhbz#620847
  - Correctly reserve and release PCI slots
  - Resolves: rhbz#623877


author: Daniel Veillard <veillard@redhat.com> - 0.8.1-27
changelog:
  - build -26 hit a miscompilation error c.f. 624895 drop -j2
  - Resolves: rhbz#620847
  - Resolves: rhbz#623877


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.1-28.el6
changelog:
  - Fix JSON migrate_set_downtime command (rhbz#561935)
  - Make SASL work over UNIX domain sockets (rhbz#641687)
  - Let qemu group look below /var/lib/libvirt/qemu/ (rhbz#643407)
  - Fix save/restore on root_squashed NFS (rhbz#643884)
  - Fix race on multiple migration (rhbz#638285)
  - Export host information through SMBIOS to guests (rhbz#526224)
  - Support forcing a CDROM eject (rhbz#626305)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.1-29.el6
changelog:
  - spec file cleanups (rhbz#649523)
  - Fix deadlock on concurrent multiple bidirectional migration (rhbz#659310)
  - Fix funny error in clock-variable (rhbz#660194)
  - Export host information through SMBIOS to guests (rhbz#526224)
  - Ensure device is deleted from guest after unplug (rhbz#644015)
  - Distinguish between QEMU domain shutdown and crash (rhbz#656845)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-1.el6
changelog:
  - Rebased to upstream 0.8.7 (rhbz#653985)
  - The following bugs got fixed by the rebase:
      rhbz#586124, rhbz#595350, rhbz#611793, rhbz#611822, rhbz#617439,
      rhbz#620363, rhbz#626873, rhbz#627143, rhbz#628772, rhbz#639595,
      rhbz#639603, rhbz#656795, rhbz#658657, rhbz#659855, rhbz#660706,
      rhbz#664406, rhbz#665446


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-2.el6
changelog:
  - Fix spec file which was not fully rebased to 0.8.7 (rhbz#653985, rhbz#660706)
  - Skip IB700 watchdog device when assigning PCI slots (rhbz#667091)
  - Improve error reporting when parsing dhcp info (rhbz#653300)
  - Don't chown saved image back to root if dynamic_ownership=0 (rhbz#661720)
  - Fix core dumps if unix_sock_group is set (rhbz#623166)
  - Add support for Westmere CPU model (rhbz#656248)
  - Add XML config switch to enable/disable vhost-net support (rhbz#643050)
  - Enable tuning of qemu network tap device "sndbuf" size (rhbz#665293)
  - Support for explicit boot device ordering (rhbz#646895)
  - Avoid qemu holding migration fd indefinitely (rhbz#620363)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-3.el6
changelog:
  - Report error if invalid type specified for character device (rhbz#638968)
  - Improve log for domain related APIs (rhbz#640202)
  - Reject SDL graphic if it's not supported by qemu (rhbz#633326)
  - Don't lose track of events when callbacks are slow (rhbz#624252)
  - Fail if per-device boot is used but deviceboot is not supported (rhbz#670399)
  - Avoid sending STOPPED event twice (rhbz#666158)
  - Fix issues introduced by dependency patches for rhbz#646895


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-4.el6
changelog:
  - Fix event-handling data race (rhbz#671567)
  - Add support for VNC over a unix domain socket (rhbz#651415)
  - Support intel 'ich6' model (rhbz#648486)
  - Do not use virtio-serial port 0 for generic ports (rhbz#670394)
  - Set SELinux context label of pipes used for qemu migration (rhbz#667756)
  - Support customizable x509 certificate paths for client (rhbz#629510)
  - Round up capacity for LVM volume creation (rhbz#670529)
  - Show error prompt when trying to managed save a shutoff domain (rhbz#672449)
  - Report more proper error for unsupported graphics (rhbz#671319)
  - Expand the man page text for virsh setmaxmem (rhbz#622534)
  - Fix event-handling allocation crash (rhbz#671564)
  - Require --mac to avoid detach-interface ambiguity (rhbz#671050)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-5.el6
changelog:
  - Docs for customizable x509 certificate paths for client (rhbz#629510)
  - Fix tests for VNC over a unix domain socket (rhbz#651415)
  - Fix problems with peer-to-peer migration (rhbz#673434)
  - Fix tunneled migration broken since 0.8.7-2 (rhbz#672199)
  - Update docs for cpu_shares setting (rhbz#641187)
  - Fix possible hang if SASL is used (rhbz#672226)
  - Cancel migration in progress when virsh gets Ctrl-C (rhbz#635353)
  - Enhance virsh migrate command (rhbz#619039)
  - Support for specifying AIO mode for qemu disks (rhbz#591703)
  - Don't leave domain paused after restore (rhbz#670278)
  - Fix possible deadlock/crash in qemu driver (rhbz#673588)
  - Add shortcut for qemu HMP pass through (rhbz#628940)
  - Fix error message when attach device fails (rhbz#675030)
  - Support for booting from assigned PCI devices (rhbz#646895)
  - Improve handling of unlimited value for memory tunables (rhbz#669069)
  - Add smartcard support (rhbz#641834)
  - Remove some RHEL-specific patches which are no longer required (rhbz#653985)
  - Support for disabling/enabling KSM per domain (rhbz#635419)
  - Add --all flag to virsh freecell command (rhbz#653530)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-6.el6
changelog:
  - Fix typo in parsing of spice 'auth' data (rhbz#676374)
  - Fix attach-interface regression (rhbz#676686)
  - Block I/O tunables via blkio cgroups controller (rhbz#632492)
  - Support SCSI RAID type & lower log level for unknown types (rhbz#675771)
  - Only initialize/cleanup libpciaccess once (rhbz#675698)
  - Imprint all logs with version + package build information (rhbz#673226)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-7.el6
changelog:
  - Properly escape special characters in domain names (rhbz#676908)
  - Fix enum type declaration (rhbz#628940)
  - Fix cleanup on VM state after failed QEMU startup (rhbz#673588)
  - Fix XML generation for smartcards (rhbz#677308)
  - Ignore failure of "qemu -M ?" on older qemu (rhbz#676563)
  - Fix typo in setting up SPICE passwords (rhbz#677709)
  - Avoid NULL dereference in virDomainMemoryStats (rhbz#677484)
  - Avoid NULL dereference on error in qemu driver (rhbz#677493)
  - Fix error message when saving a shutoff domain (rhbz#677547)
  - Create enough volumes for mpath pool (rhbz#677231)
  - Allow to delete device mapper disk partition (rhbz#611443)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-8.el6
changelog:
  - Fix --all flag of virsh freecell to really show all cells (rhbz#653530)
  - Add txmode attribute to interface XML for virtio backend (rhbz#629662)
  - Give each virtual network bridge its own fixed MAC address (rhbz#609463)
  - Fix virsh snapshot-list with --quiet option (rhbz#678833)
  - Delay IFF_UP'ing 802.1Qbh interface until migration final stage (rhbz#678826)
  - Fix several memory bugs (rhbz#679164)
  - Fix virt-pki-validate when CERTTOOL is missing (rhbz#679153)
  - Fix memory corruption in virFileAbsPath (rhbz#680281)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-9.el6
changelog:
  - Reorder nwfilter match extensions relative to state match (rhbz#678139)
  - Avoid overwriting error message in qemu driver (rhbz#678870)
  - Allow removing hash entries in virHashForEach (rhbz#681459)
  - Avoid double close on qemu domain restore (rhbz#672725)
  - Fix DomainObj refcounting/hashtable races in qemu driver (rhbz#670848)
  - Fix several memory leaks (rhbz#682249)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-11.el6
changelog:
  - Support vram specification for qxl graphics (rhbz#673578)
  - Fix parsing int options in virsh (rhbz#639587)
  - Use -o encryption=on instead of -e for qemu-img (rhbz#676984)
  - Support domain snapshots with current QMP (rhbz#589076)
  - Update auditing support (rhbz#642785)
  - Only request sound cgroup ACL when required (rhbz#680398)
  - Allow fine-tuning of device ACL permissions (rhbz#683163)
  - Support vhost in attach-interface (rhbz#683276)
  - Don't request cgroup ACL access for /dev/net/tun (rhbz#683305)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-12.el6
changelog:
  - Fix vram settings for qxl graphics (rhbz#673578)
  - Free stream when domain shuts down while its console is open (rhbz#682741)
  - Use hardcoded python path in libvirt.py (rhbz#684204)
  - Add missing checks for read only connections (CVE-2011-1146)
  - Eliminate potential null pointer deref when auditing macvtap devices (rhbz#642785)
  - Insert error messages to avoid a quiet abortion of commands (rhbz#605660)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-13.el6
changelog:
  - Properly report error in virConnectDomainXMLToNative (CVE-2011-1146)
  - Handle DNS over IPv6 (rhbz#687896)
  - Start dnsmasq even if no dhcp ranges/hosts are specified (rhbz#687291)
  - Use a separate dhcp leases file for each network (rhbz#687551)
  - Fix a possible crash in storage driver (rhbz#684712)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-14.el6
changelog:
  - Fix delayed events when SASL is active (rhbz#624252)
  - Fix ref-counting bugs (rhbz#688774)
  - Log an error if on failure to connect to netlink socket (rhbz#689001)
  - Log error and abort network startup when radvd isn't found (rhbz#688957)
  - Add PCI sysfs reset access rights to qemu (rhbz#689002)
  - Fix regression with qemu:///session URI (rhbz#684655)
  - Avoid leaking PCI config fd into qemu (rhbz#687993)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-15.el6
changelog:
  - Fix return value for virJSONValueFromString if it fails (rhbz#688723)
  - Fix positioning to end of qemu log file (rhbz#689986)
  - Initialization error of qemuCgroupData in Qemu host usb hotplug (rhbz#690183)
  - 8021Qbh: Use preassociate-rr during the migration prepare stage (rhbz#684870)
  - Make error reporting in libvirtd thread safe (rhbz#689374)
  - Add missing dependencies (rhbz#690022)
  - Fix restoring a compressed save image (rhbz#691034)
  - Fix label restore bugs in qemu driver (rhbz#690737)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-16.el6
changelog:
  - nwfilter: Enable rejection of packets (rhbz#681948)
  - Revert all previous error log priority hacks (rhbz#587603)
  - Filter out certain expected error messages from libvirtd (rhbz#587603)
  - qemu: Unlock qemu driver before return from domain save (rhbz#688774)
  - Do not send monitor command after monitor meet error (rhbz#688774)
  - qemu: Ignore libvirt debug messages in qemu log (rhbz#681492)
  - virsh: Fix memtune's help message for swap_hard_limit (rhbz#680190)
  - virsh: Fix documentation for memtune command (rhbz#680190)
  - docs: Fix typo (rhbz#680190)
  - Fix typo in systemtap tapset directory name (rhbz#693701)
  - qemu: Ignore unusable binaries (rhbz#676563)
  - qemu: Support for overriding NPROC limit (rhbz#674602)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-17.el6
changelog:
  - Don't return an error on failure to create blkio controller (rhbz#689030)
  - Fix possible infinite loop in remote driver (rhbz#691514)
  - qemu: Remove the managed state file only if restoring succeeded (rhbz#692998)
  - docs: Tweak virsh restore warning (rhbz#692998)


author: Jiri Denemark <jdenemar@redhat.com> - 0.8.7-18.el6
changelog:
  - network: Fix NULL dereference during error recovery (rhbz#696660)
  - virsh: Fix regression in parsing optional integer (rhbz#693963)
  - util: Fix crash when removing entries during hash iteration (rhbz#693385)
  - Experimental libvirtd upstart job (rhbz#678084)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.9.1-1.el6
changelog:
  - Rebased to upstream 0.9.1 (rhbz#705814)
  - The rebase also fixes the following bugs:
      rhbz#587276, rhbz#591058, rhbz#592170, rhbz#598792, rhbz#673814,
      rhbz#677228, rhbz#681458, rhbz#682237, rhbz#692745, rhbz#693932,
      rhbz#694382, rhbz#695653, rhbz#698071, rhbz#698197, rhbz#698208,
      rhbz#698490, rhbz#701305


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.2-1.el6
changelog:
  - Rebased to upstream 0.9.2 (rhbz#705814)
  - The rebase also fixes the following bugs:
      rhbz#569567, rhbz#691830, rhbz#607526, rhbz#609650, rhbz#632495,
      rhbz#640603, rhbz#658713, rhbz#669549, rhbz#677229, rhbz#678548,
      rhbz#640603, rhbz#682237, rhbz#683005, rhbz#684848, rhbz#688859,
      rhbz#690695, rhbz#692355, rhbz#693203, rhbz#694516, rhbz#697650,
      rhbz#698133, rhbz#702044, rhbz#704124, rhbz#704144, rhbz#705405,
      rhbz#706869, rhbz#706883, rhbz#706966, rhbz#707173, rhbz#707257,
      rhbz#707298, rhbz#709576, rhbz#709776, rhbz#710150, rhbz#711151


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-1.el6
changelog:
  - Rebased to upstream 0.9.3 (rhbz#705814)
  - The rebase also fixes the following bugs:
      rhbz#591974, rhbz#632499, rhbz#641087, rhbz#664629, rhbz#679668,
      rhbz#682121, rhbz#693648, rhbz#693650, rhbz#693661, rhbz#698340,
      rhbz#698825, rhbz#698861, rhbz#701394, rhbz#707439, rhbz#707530,
      rhbz#715355, rhbz#716826, rhbz#717203, rhbz#718143, rhbz#712050,
      rhbz#715184


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-2.el6
changelog:
  - Fix mistaken order of server cert/key parameters in constructor (rhbz#719838)
  - qemu: Don't chown files on NFS share if dynamic_ownership is off (rhbz#716478)
  - util: Don't try to fchown files opened as non-root (rhbz#707257)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-4.el6
changelog:
  - storage: Avoid memory leak on metadata fetching (rhbz#707155)
  - graphics: Add support for action_if_connected in qemu (rhbz#707212)
  - qemu: Save domain status ASAP after creating qemu process (rhbz#707894)
  - bios: Add support for SGA (rhbz#711598)
  - pci: Initialize state values on reattach (rhbz#713697)
  - Keep consistence between code and doc on log level and usage (rhbz#716888)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.3-8.el6
changelog:
  - libvirt crash when running domains and vdsm is restarted (rhbz#723811)
  - connect to hypervisor with unconfigured tls/tcp connection pbm (rhbz#723442)
  - virsh list produced segmentation fault when libvirtd is not up (rhbz#723843)
  - clientcert.pem validation failure cause libvirtd crash (rhbz#723881)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-0rc1.el6
changelog:
  - rebased to upstream 0.9.4 release candidate 1 (rhbz#705814)
  - the rebase also fixes the following bugs:
      rhbz#603039, rhbz#632499, rhbz#632760, rhbz#643947, rhbz#678027,
      rhbz#697742, rhbz#697841, rhbz#704836, rhbz#707530, rhbz#720350,
      rhbz#720889, rhbz#721335, rhbz#722862


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-0rc2.el6
changelog:
  - rebased to upstream 0.9.4 release candidate 2 (rhbz#705814)
  - the rebase also fixes the following bugs:
      rhbz#667624, rhbz#669586, rhbz#682084, rhbz#707155, rhbz#707212,
      rhbz#725322, rhbz#725935, rhbz#725950


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-1.el6
changelog:
  - Rebased to upstream 0.9.4 (rhbz#705814)
  - The rebase also fixes the following bugs:
      rhbz#634653, rhbz#707212, rhbz#722806, rhbz#723862, rhbz#726304,
      rhbz#726398, rhbz#727047, rhbz#727094


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-2.el6
changelog:
  - daemon: Unlink unix socket paths on shutdown (rhbz#725702)
  - rpc:Fix sasl session relocking intead of unlocking it (rhbz#729198)
  - network: Eliminate lag in updating dnsmasq hosts files (rhbz#727982)
  - Don't mount /dev for application containers (rhbz#728835)
  - support connected parameter in set_password (rhbz#707212)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-3.el6
changelog:
  - Fix large files support (rhbz#728992)
  - qemu: Avoid overwriting errors from virGetHostname (rhbz#729567)
  - qemu: Fix -chardev udp if parameters are omitted (rhbz#689761)
  - managedsave: Prohibit use on transient domains (rhbz#729714)
  - nwfilter: Tolerate disappearing interfaces while instantiating filter (rhbz#729945)
  - docs: Describe new virtual switch configuration in network XML docs (rhbz#643947)
  - storage: Directory shouldn't be listed as type 'file' (rhbz#727088)
  - virsh: Add dir type for listing volumes with vol-list (rhbz#727088)
  - qemu: Avoid crash on process attach (rhbz#730615)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-4.el6
changelog:
  - Bugfix: Check stdoutWatch before removing the handler. (rhbz#730600)
  - daemon: Fix regression of libvirtd reloading support (rhbz#730428)
  - libvirtd.init.in: Stop/restart() - wrong return value in case of failure (rhbz#730510)
  - Add API for duplicating a socket/client file descriptor (rhbz#720269)
  - Add backlog parameter to virNetSocketListen (rhbz#720269)
  - Support changing UNIX socket owner in virNetSocketNewListenUNIX (rhbz#720269)
  - qemu: Refactor do{Tunnel, Native}Migrate functions (rhbz#720269)
  - qemu: Use virNetSocket for tunneled migration (rhbz#720269)
  - qemu: Use fd: protocol for migration (rhbz#720269)
  - qemu: Support event_idx parameter for virtio disk and net devices (rhbz#725448)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-5.el6
changelog:
  - patch problem for seamless SPICE migration (rhbz#730753)
  - macvtap: Fix getPhysfn to get the PF of a direct attach network interface (rhbz#732082)
  - SSL spice session can't be kept during migration (rhbz#729874)
  - Storage driver should flush host cache after cloning volumes (rhbz#689416)
  - Documentation for CFS bandwidth limiting cgroup (rhbz#692769)
  - libvirt error message should show the uri content but not (null) (rhbz#730244)
  - libvirtd.conf error causes libvirtd to exit silently (rhbz#728654)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-6.el6
changelog:
  - daemon: Move TLS initialization to virInitialize (rhbz#732893)
  - Fix command test wrt gnutls initialize & fix debugging (rhbz#732893)
  - qemu: Init reattaching related members pciDevice before reattach (rhbz#728203)
  - qemu: error if qemu monitor command not found for BlockJob (rhbz#727502)
  - virsh: error if specified bandwidth is invalid for blockjob (rhbz#727502)
  - util: Only fchown newly created files in virFileOpenAs (rhbz#534010)
  - screenshot: Implement multiple screen support (rhbz#710489)
  - security: Rename SetSocketLabel APIs to SetDaemonSocketLabel (rhbz#731243)
  - security: Introduce SetSocketLabel (rhbz#731243)
  - qemu: Correctly label migration TCP socket (rhbz#731243)
  - snapshot: Don't leak resources on qemu snapshot failure (rhbz#733499)
  - Fix memory leak while scanning snapshots (rhbz#674537)
  - qemu: Minor formatting cleanup (rhbz#674537)
  - Swap virDomain and virDomainSnapshot declaration (rhbz#674537)
  - snapshot: Only pass snapshot to qemu command line when reverting (rhbz#674537)
  - snapshot: Track current snapshot across restarts (rhbz#674537)
  - send-key: Fix scan keycode map (rhbz#733597)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-7.el6
changelog:
  - qemu: Properly label outgoing pipe for tunneled migration (rhbz#733998)
  - snapshot: Forbid snapshot on autodestroy domain (rhbz#733806)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-8.el6
changelog:
  - qemu: Fix a regression of domain save (rhbz#735011)
  - virsh: Improve send-key documentation (rhbz#699847)
  - start: Allow discarding managed save (rhbz#730750)
  - virsh: Support 'virsh start --force-boot' on older servers (rhbz#730750)
  - maint: Fix comment typos (rhbz#730750)
  - qemu: Refactor file opening (rhbz#730750)
  - qemu: Detect incomplete save files (rhbz#730750)
  - virsh: Avoid memory leak on cmdVolCreateAs (rhbz#735008)
  - snapshot: Fix corner case on OOM during creation (rhbz#674537)
  - Ensure stream is aborted when exiting console (rhbz#731673)
  - following for (rhbz#731583, rhbz#731579, rhbz#731584, rhbz#731673):
  - Ensure client streams are closed when marking a client for close
  - Fix race condition in abort of stream
  - Tweak debugging message in RPC client code
  - Don't attempt to read from a stream if it is closed
  - Ensure async packets never get marked for sync replies
  - Ignore unused streams in virStreamAbort
  - rpc: Don't close connection if program is unknown
  - rpc: Fix a typo in debugging log in virNetServerProgramSendStreamData
  - stream: Remove redundant reference to client while sending stream data
  - Fix memory leak dispatching domain events
  - Avoid use-after-free on streams, due to message callbacks
  - Fix tracking of RPC messages wrt streams
  - Fix parted sector size assumption (rhbz#735441)
  - Fix incorrect path length check in sanlock lockspace setup (rhbz#735443)
  - Fix sanlock socket security labelling (rhbz#735442)
  - Remove bogus virSecurityManagerSetProcessFDLabel method (rhbz#735442)
  - security: Fix build (rhbz#735442)
  - Fix keymap used to talk with QEMU (rhbz#632499)
  - virsh: Fix snapshot-create-as to handle arbitrary names (rhbz#735495)
  - virsh: Add virsh snapshot-current --name (rhbz#735495)
  - virsh: Add snapshot-parent (rhbz#735495)
  - virsh: Don't reject undefine on active domain (rhbz#735495)
  - virsh: Fix logic bug (rhbz#735495)
  - virsh: Fix dead store (rhbz#735495)
  - virsh: Tweak misleading wording (rhbz#735495)
  - virsh: Concatenate qemu-monitor-command arguments (rhbz#735495)
  - maint: Treat more libxml2 functions as free-like (rhbz#735495)
  - xml: Add another convenience function (rhbz#735495)
  - maint: Simplify lots of libxml2 clients (rhbz#735495)
  - virsh: Add list --managed-save (rhbz#735495)
  - virsh: Prefer unsigned flags (rhbz#735495)
  - snapshot: Add snapshot-list --parent to virsh (rhbz#735495)
  - qemu: Allow to undefine a running domain (rhbz#735498)
  - test: Allow to undefine a running domain (rhbz#735498)
  - build: Fix typo in recent test patch (rhbz#735498)
  - test: Rewrite test to match change in behavior (rhbz#735498)
  - virsh: Properly interleave shared stdout and stderr (rhbz#735498)
  - snapshot: Better events when starting paused (rhbz#733762)
  - snapshot: Fine-tune ability to start paused (rhbz#733762)
  - snapshot: Expose --running and --paused in virsh (rhbz#733762)
  - snapshot: Fine-tune qemu saved images starting paused (rhbz#733762)
  - snapshot: Improve reverting to qemu paused snapshots (rhbz#733762)
  - snapshot: Properly revert qemu to offline snapshots (rhbz#733762)
  - snapshot: Fine-tune qemu snapshot revert states (rhbz#733762)
  - snapshot: Properly revert qemu to offline snapshots (rhbz#733762)
  - snapshot: Fine-tune qemu snapshot revert states (rhbz#733762)
  - snapshot: Speed up snapshot location (rhbz#733529)
  - snapshot: Avoid crash when deleting qemu snapshots (rhbz#733529)
  - snapshot: Track current domain across deletion of children (rhbz#733529)
  - snapshot: Simplify acting on just children (rhbz#733529)
  - snapshot: Allow deletion of just snapshot metadata (rhbz#735457)
  - snapshot: Let qemu discard only snapshot metadata (rhbz#735457)
  - snapshot: Identify which snapshots have metadata (rhbz#735457)
  - snapshot: Reflect new dumpxml and list options in virsh (rhbz#735457)
  - snapshot: Identify qemu snapshot roots (rhbz#735457)
  - snapshot: Allow recreation of metadata (rhbz#735457)
  - snapshot: Refactor virsh snapshot creation (rhbz#735457)
  - snapshot: Improve virsh snapshot-create, add snapshot-edit (rhbz#735457)
  - snapshot: Add qemu snapshot creation without metadata (rhbz#735457)
  - snapshot: Add qemu snapshot redefine support (rhbz#735457)
  - vbox, xenapi: Add virDomainUndefineFlags (rhbz#735457)
  - snapshot: Prevent stranding snapshot data on domain destruction (rhbz#735457)
  - snapshot: Teach virsh about new undefine flags (rhbz#735457)
  - snapshot: Refactor some qemu code (rhbz#735457)
  - snapshot: Cache qemu-img location (rhbz#735457)
  - snapshot: Support new undefine flags in qemu (rhbz#735457)
  - snapshot: Prevent migration from stranding snapshot data (rhbz#735457)
  - snapshot: Refactor domain xml output (rhbz#735553)
  - snapshot: Allow full domain xml in snapshot (rhbz#735553)
  - snapshot: Correctly escape generated xml (rhbz#735553)
  - snapshot: Update rng to support full domain in xml (rhbz#735553)
  - snapshot: Store qemu domain details in xml (rhbz#735553)
  - schedinfo: Update man page about virsh schedinfo command (unknown)
  - snapshot: Additions to domain xml for disks (rhbz#638510)
  - snapshot: Reject transient disks where code is not ready (rhbz#638510)
  - snapshot: Introduce new deletion flag (rhbz#638510)
  - snapshot: Expose new delete flag in virsh (rhbz#638510)
  - snapshot: Allow halting after snapshot (rhbz#638510)
  - snapshot: Expose halt-after-creation in virsh (rhbz#638510)
  - snapshot: Support extra state in snapshots (unknown)
  - snapshot: Add <disks> to snapshot xml (rhbz#638510)
  - snapshot: Also support disks by path (rhbz#638510)
  - snapshot: Add virsh domblklist command (rhbz#638510)
  - snapshot: Add flag for requesting disk snapshot (rhbz#638510)
  - snapshot: Wire up disk-only flag to snapshot-create (rhbz#638510)
  - snapshot: Reject unimplemented disk snapshot features (rhbz#638510)
  - snapshot: Make it possible to audit external snapshot (rhbz#638510)
  - snapshot: Wire up new qemu monitor command (rhbz#638510)
  - snapshot: Wire up live qemu disk snapshots (rhbz#638510)
  - snapshot: Use SELinux and lock manager with external snapshots (rhbz#638510)
  - daemon: Create priority workers pool (rhbz#692663)
  - qemu: Introduce job queue size limit (rhbz#692663)
  - qemu: Deal with stucked qemu on daemon startup (rhbz#692663)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-10.el6
changelog:
  - virterror: Fix error message for VIR_ERR_INVALID_ARG (rhbz#689388)
  - remote: Refuse connecting to remote socket (rhbz#689388)
  - Threadpool: Initialize new dynamic workers (rhbz#692663)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-11.el6
changelog:
  - blockinfo: Fix qemu regression in handling disk name (rhbz#736603)
  - doc: Fix incorrect option in send-key (rhbz#736297)
  - virsh: Fix typo in opts_send_key (rhbz#736297)
  - rpc: Avoid memory leak on virNetTLSContextValidCertificate (rhbz#735650)
  - tests: Avoid memory leak on testTLSSessionInit (rhbz#735650)
  - qemu: Fix seamless SPICE migration with older qemu (rhbz#730753)
  - snapshot: Fix regression with system checkpoints (rhbz#736682)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-12.el6
changelog:
  - selinux: Detect virt_use_nfs boolean set (rhbz#589922)
  - virnetsocket: Pass KRB5CCNAME env variable (rhbz#737176)
  - snapshot: Fix double free of qemuImgBinary (rhbz#737010)
  - qemu_api: Modify apibuild.py to generate docs for QEMU APIs (rhbz#736040)
  - qemu_api: Update Makefile for subdir docs (rhbz#736040)
  - qemu_api: Add comments for API virDomainQemuMonitorCommand (rhbz#736040)
  - qemu_api: Add override XML and C files for QEMU APIs (rhbz#736040)
  - qemu_api: Update Py binding generator to generate files for QEMU APIs (rhbz#736040)
  - qemu_api: Update Makefile to generate libvirtmod_qemu lib (rhbz#736040)
  - qemu_api: Update libvirt spec file (rhbz#736040)
  - Remove two references to files not generated (rhbz#736040)
  - qemu_api: Doc improvements (rhbz#736040)
  - python: Fix libvirt.py generation to include virterror info (rhbz#736040)
  - snapshot: New APIs for inspecting snapshot object (rhbz#735457)
  - snapshot: Use new API for less work (rhbz#735457)
  - snapshot: ABI stability must include memory sizing (rhbz#735553)
  - spec: Require augeas for sanlock (rhbz#738314)
  - sanlock: Add missing test command in virt-sanlock-cleanup.in (rhbz#738534)
  - snapshot: Tweak snapshot-create-as diskspec docs (rhbz#738411)
  - qemu: Hold conn open for all threads started by qemuProcessReconnectAll (rhbz#738778)
  - rpc: Convert unknown procedures to VIR_ERR_NO_SUPPORT (rhbz#738439)
  - Prevent crash from dlclose() of libvirt.so (rhbz#739167)
  - doc: Add statment about permissions needed to do a core dump (rhbz#738146)
  - snapshot: Affect persistent xml after disk snapshot (rhbz#738676)
  - snapshot: Allow disk snapshots of qcow2 disks (rhbz#738676)
  - qemu: Prevent disk corruption on domain shutdown (rhbz#734773)
  - qemu: Introduce shutdown reason for paused state (rhbz#734773)
  - qemu: Fix shutoff reason when domain crashes (rhbz#739641)
  - qemu: Properly detect crash of a rebooted domain (rhbz#739641)
  - qemu: Avoid memory leak (rhbz#739704)
  - remote: Avoid memory leak (rhbz#739704)
  - util: Avoid memory leak (rhbz#739704)
  - Fix memory leak parsing 'relabel' attribute in domain security XML (rhbz#739704)
  - Don't leak memory if a cgroup is mounted multiple times (rhbz#739704)
  - network: Eliminate potential memory leak on parse failure (rhbz#739704)
  - virsh: doc: Fix supported driver types for attach-disk command (rhbz#738970)
  - Do not log invalid operations in libvirtd logs (rhbz#590807)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-13.el6
changelog:
  - Fix crash on events due to allocation errors (rhbz#737881)
  - remote: Fix crash on OOM (rhbz#737881)
  - Fix persistent migration config save (rhbz#738148)
  - qemu: Transfer inactive XML among cookie (rhbz#738148)
  - storage: Ensure the device path exists before refreshing disk pool (rhbz#611442)
  - Store max migration bandwidth in qemuDomainObjPrivate struct (rhbz#740099)
  - Save migration speed in qemuDomainMigrateSetMaxSpeed (rhbz#740099)
  - Set qemu migration speed unlimited when migrating to file (rhbz#740099)
  - Use max bandwidth from qemuDomainObjPrivate struct when migrating (rhbz#740099)
  - build: Silence warning on 32-bit build (rhbz#740099)
  - conf: Assign newDef of active domain as persistent conf if it is NULL (rhbz#728428)
  - qemu: Avoid dereferencing a NULL pointer (rhbz#739704)
  - sanlock: Fix memory leak (rhbz#739704)
  - virsh: Fix regression in argv parsing (rhbz#740168)
  - snapshot: Fix logic bug in qemu undefine (rhbz#735457)
  - snapshot: Prepare to remove transient snapshot metadata (rhbz#735457)
  - snapshot: Remove snapshot metadata on transient exit (rhbz#735457)
  - snapshot: Also delete empty directory (rhbz#735457)
  - virsh: Do not ignore the specified flags for cmdSaveImageDefine (rhbz#740508)
  - selinux: Correctly report warning if virt_use_nfs not set (rhbz#589922)
  - qemu: Properly hot-unplug drives (rhbz#696596)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-14.el6
changelog:
  - Fix synchronous reading of stream data (rhbz#741337)
  - qemu: Add ability to set PCI device "rombar" on or off (rhbz#738095)
  - virsh: Better document --copy-storage migrate options (rhbz#677220)
  - virsh: Enhance documentation of commands starting jobs (rhbz#705237)
  - qemu: Always remove domain object if MigratePrepare fails (rhbz#741251)
  - security: Properly chown/label bidirectional and unidirectional fifos (rhbz#740478)
  - qemu: Check domain status details when reconnecting monitor (rhbz#617890)
  - qemu: Finish domain shutdown on reconnect (rhbz#617890)
  - qemu: Avoid loop of fake reboots (rhbz#617890)
  - qemu: Preserve fakeReboot flag in domain status (rhbz#617890)
  - snapshot: Fix man page typos (rhbz#740686)
  - docs: Document virsh nodedev-* commands (rhbz#740686)
  - docs: Document node device XML (rhbz#740686)
  - qemu: Add return value check (rhbz#739704)
  - qemu: Check for ejected media during startup and migration (rhbz#725673)
  - virsh: Update man page for cpu_shares parameter (rhbz#639591)
  - virsh: Describe attach-interface parameter target (rhbz#698899)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-15.el6
changelog:
  - Add virFileLock and virFileUnlock APIs (rhbz#728153)
  - Move pidfile functions into util/virpidfile.{c, h} (rhbz#728153)
  - Introduce functions for checking whether a pidfile is valid (rhbz#728153)
  - Add some APIs which use locking for crashsafe pidfile handling (rhbz#728153)
  - Convert libvirtd to use crash-safe pidfile APIs (rhbz#728153)
  - build: Fix recent build failures (rhbz#728153)
  - daemon: Don't remove pidfiles in init scripts (rhbz#728153)
  - daemon: Modify init script to detect upstart managed libvirtd (rhbz#728153)
  - qemu: Check for outstanding async job too (rhbz#742277)
  - qemu: Make PCI multifunction support more manual (rhbz#727530)
  - network: Fill in bandwidth from portgroup for all forward modes (rhbz#743176)
  - snapshot: Refactor virsh snapshot parent computation (rhbz#742410)
  - snapshot: Better virsh handling of missing current, parent (rhbz#742410)
  - qemu: Fix migration with dname (rhbz#740533)
  - qemu: Correct misspelled 'enospc' option, and only use for werror (rhbz#730909)
  - snapshot: Add REVERT_FORCE to API (rhbz#742615)
  - snapshot: Use qemu-img on disks in use at time of snapshot (rhbz#742615)
  - snapshot: Enforce REVERT_FORCE on qemu (rhbz#742615)
  - init: Raise default system aio limits (rhbz#740899)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-16.el6
changelog:
  - qemu: Enable multifunction for older qemu (rhbz#738388)
  - qemu: Don't fail virDomainGetInfo if we can't update balloon info (rhbz#741217)
  - qemu: Leave rerror policy at default when enospace is requested (rhbz#730909)
  - snapshot: Fix virsh error message typo (rhbz#735457)
  - snapshot: Let virsh edit disk snapshots (rhbz#744071)
  - snapshot: Simplify redefinition of disk snapshot (rhbz#744071)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-17.el6
changelog:
  - Fix deadlock when the RPC program is unknown (rhbz#743843)
  - qemuDomainAttach: Initialize pidfile variable (rhbz#744548)
  - storage: Do not use comma as seperator for lvs output (rhbz#727474)
  - snapshot: Avoid accidental renames with snapshot-edit (rhbz#744724)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-18.el6
changelog:
  - virDomainCoreDump: Introduce VIR_DUMP_RESET flag (rhbz#632498)
  - qemu: Implement VIR_DUMP_RESET (rhbz#632498)
  - qemu: Check for domain being active on successful job acquire (rhbz#745734)
  - Set to NULL members that have been freed to prevent crashes (rhbz#746075)
  - virFDStream: Close also given errfd (fd leak) (rhbz#746075)
  - qemu: Silence Coverity false positive (rhbz#739704)
  - command: Avoid fd leak on failure (rhbz#739704)
  - build: Add compiler attributes to virUUIDParse (rhbz#739704)
  - qemu: Check for json allocation failure (rhbz#739704)
  - qemu: Fix text block info parsing (rhbz#739704)
  - storage: Plug memory leak on error (rhbz#739704)
  - conf: Plug memory leak on error (rhbz#739704)
  - qemu: Plug memory leak on migration (rhbz#739704)
  - macvtap: Plug memory leak for 802.1Qbh (rhbz#739704)
  - macvtap: Avoid invalid free (rhbz#739704)
  - Update to require sanlock 1.8 for license compliance (rhbz#739518)
  - events: Propose a separate lock for event queue (rhbz#743817)
  - util: Make getaddrinfo failure nonfatal in virGetHostname (rhbz#738915)
  - qemu: Make sure BeginJob is always followed by EndJob (rhbz#746268)
  - pci: Fix pciDeviceListSteal on multiple devices (rhbz#733587)
  - qemu: Do not reattach PCI device used by other domain when shutdown (rhbz#733587)
  - qemu: Honor the orginal PCI dev properties when reattaching (rhbz#736214)
  - daemon: Always advertise libvirtd service (rhbz#726616)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-20.el6
changelog:
  - qemu: Avoid leaking uninit data from hotplug to dumpxml (rhbz#747516)
  - storage: Plug iscsi memory leak (rhbz#747516)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.4-21.el6
changelog:
  - docs: Document managed=yes of hostdev passthrough (rhbz#740686)
  - ServerClient: Flush cached data (rhbz#748025)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-1.el6
changelog:
  - Rebase to upstream 0.9.10 (rhbz#752433)
  - Add support for sVirt in the LXC driver
  - block rebase: add new API virDomainBlockRebase
  - API: Add api to set and get domain metadata
  - virDomainGetDiskErrors public API
  - conf: add rawio attribute to disk element of domain XML
  - Add new public API virDomainGetCPUStats()
  - Introduce virDomainPMSuspendForDuration API
  - resize: add virStorageVolResize() API
  - Add a virt-host-validate command to sanity check HV config
  - Add new virDomainShutdownFlags API
  - QEMU guest agent support
  - many improvements and bug fixes


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-2.el6
changelog:
  - qemu: Set capabilities based on supported monitor commands (rhbz#766958)
  - qemu: Implement DomainPMSuspendForDuration (rhbz#766958)
  - snapshot: Fix snapshot deletion use-after-free (rhbz#790744)
  - storage: Allow runtime detection of scrub (rhbz#725013)
  - qemu: Unlock monitor when connecting to dest qemu fails (rhbz#783968)
  - qemu: Prevent crash of libvirtd without guest agent (rhbz#790745)
  - python: Expose virDomain{G,S}etInterfaceParameters APIs in python binding (rhbz#770971)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-3.el6
changelog:
  - storage: Allow runtime detection of scrub missing build dep (rhbz#725013)
  - daemon: Plug memory leak (rhbz#795978)
  - daemon: Fix logic bug with virAsprintf (rhbz#795978)
  - util: Fix virFileAccessibleAs return path from parent (rhbz#795093)
  - Add support for unsafe migration (rhbz#751631)
  - virsh: Add --unsafe option to migrate command (rhbz#751631)
  - Introduce virStorageFileIsClusterFS (rhbz#751631)
  - qemu: Forbid migration with cache != none (rhbz#751631)
  - qemu: Nicer error message on failed graceful destroy (rhbz#795656)
  - Error out when using SPICE TLS with spice_tls=0 (rhbz#790436)
  - Revert "spec: Mark directories in /var/run as ghosts" (rhbz#788985)
  - Fixed URI parsing (rhbz#785164)
  - virsh: Fix informational message in iface-bridge command (rhbz#797066)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-4.el6
changelog:
  - Improve error reporting when virsh console is run without a TTY (rhbz#729940)
  - pidfile: Make checking binary path in virPidFileRead optional (rhbz#729940)
  - Add flags for virDomainOpenConsole (rhbz#729940)
  - virsh: Add support for VIR_DOMAIN_CONSOLE_* flags (rhbz#729940)
  - fdstream: Emit stream abort callback even if poll() doesnt. (rhbz#729940)
  - fdstream: Add internal callback on stream close (rhbz#729940)
  - util: Add helpers for safe domain console operations (rhbz#729940)
  - qemu: Add ability to abort existing console while creating new one (rhbz#729940)
  - Fixed service handling in specfile (rhbz#786770)
  - qemu: Don't emit tls-port spice option if port is -1 (rhbz#798220)
  - docs: Comments wiping supported algorithms (rhbz#725013)
  - libvirt-guests: Add documentation and clean up to use virsh's improved list (rhbz#693758)
  - libvirt-guests: Don't try to do a managed-save of transient guests (rhbz#693758)
  - virsh: Enhance list command to ease creation of shell scripts (rhbz#693758)
  - libvirt-guests: Check if URI is reachable before launching commands (rhbz#720691)
  - hooks: Add support for capturing hook output (rhbz#795127)
  - qemu: Add pre-migration hook (rhbz#795127)
  - Support for cpu64-rhel* qemu cpu models (rhbz#768450)
  - util: Add netlink event handling to virnetlink.c (rhbz#693842)
  - Add de-association handling to macvlan code (rhbz#693842)
  - qemu: Add ibmvscsi controller model (rhbz#782034)
  - qemu: Add virtio-scsi controller model (rhbz#782034)
  - conf: Add helper function to look up disk controller model (rhbz#782034)
  - conf: Introduce new attribute for device address format (rhbz#782034)
  - qemu: New cap flag to indicate if channel is supported by scsi-disk (rhbz#782034)
  - qemu: Build command line for the new address format (rhbz#782034)
  - tests: Add tests for virtio-scsi and ibmvscsi controllers (rhbz#782034)
  - virsh: Two new helper functions for disk device changes (rhbz#713932)
  - virsh: Use vshFindDisk and vshPrepareDiskXML in cmdDetachDisk (rhbz#713932)
  - virsh: New command cmdChangeMedia (rhbz#713932)
  - qemu: Require json for block jobs (rhbz#799055)
  - qemu: Pass block pull backing file to monitor (rhbz#799055)
  - virsh: Expose partial pull (rhbz#799055)
  - libvirt-guests: Add parallel startup and shutdown of guests (rhbz#625362)
  - qemu: Shared or readonly disks are always safe wrt migration (rhbz#751631)
  - util: Eliminate crash in virNetDevMacVLanCreateWithVPortProfile (rhbz#693842)
  - rpc: Fix client crash on connection close (rhbz#800185)
  - conf: Add missing device types to virDomainDevice(Type|Def) (rhbz#691539)
  - conf: Relocate virDomainDeviceDef and virDomainHostdevDef (rhbz#691539)
  - conf: Reorder static functions in domain_conf.c (rhbz#691539)
  - qemu: Rename virDomainDeviceInfoPtr variables to avoid confusion (rhbz#691539)
  - conf: Add device pointer to args of virDomainDeviceInfoIterate callback (rhbz#691539)
  - conf: Make hostdev info a separate object (rhbz#691539)
  - conf: HostdevDef parse/format helper functions (rhbz#691539)
  - conf: Give each hostdevdef a parent pointer (rhbz#691539)
  - conf: Put subsys part of virDomainHostdevDef into its own struct (rhbz#691539)
  - conf: Hostdev utility functions (rhbz#691539)
  - qemu: Re-order functions in qemu_hotplug.c (rhbz#691539)
  - qemu: Refactor hotplug detach of hostdevs (rhbz#691539)
  - conf: Parse/format type='hostdev' network interfaces (rhbz#691539)
  - qemu: Support type='hostdev' network devices at domain start (rhbz#691539)
  - conf: Change virDomainNetRemove from static to global (rhbz#691539)
  - qemu: Use virDomainNetRemove instead of inline code (rhbz#691539)
  - qemu: Support type=hostdev network device live hotplug attach/detach (rhbz#691539)
  - util: Two new pci util functions (rhbz#691539)
  - util: Support functions for mac/portprofile associations on hostdev (rhbz#691539)
  - util: Changes to support portprofiles for hostdevs (rhbz#691539)
  - qemu: Install port profile and mac address on netdev hostdevs (rhbz#691539)
  - Fix build after commit e3ba4025 (rhbz#693842)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-5.el6
changelog:
  - Avoid global variable shadowed (rhbz#737726)
  - Add nodeGetCPUmap() for getting available CPU IDs in a cpumap. (rhbz#737726)
  - Qemu driver for virDomainGetCPUstats using cpuacct cgroup. (rhbz#737726)
  - Cpu-stats command shows cpu statistics information of a domain. (rhbz#737726)
  - Ensure max_id is initialized in linuxParseCPUmap() (rhbz#737726)
  - rpc: Allow truncated return for virDomainGetCPUStats (rhbz#737726)
  - qemu: Don't parse device twice in attach/detach (rhbz#770031)
  - sanlock: Fix condition left crippled while debugging (rhbz#785736)
  - sanlock: Use STREQ_NULLABLE instead of STREQ on strings that may be null (rhbz#785736)
  - qemu: Fix startupPolicy for snapshot-revert (rhbz#798938)
  - util: Don't overflow on errno in virFileAccessibleAs (rhbz#798938)
  - blockResize: Add flag for bytes (rhbz#796526)
  - docs: Use correct terminology for 1024 bytes (rhbz#796526)
  - api: Add overflow error (rhbz#796526)
  - util: New function for scaling numbers (rhbz#796526)
  - xml: Share 'unit' in RNG (rhbz#796526)
  - xml: Output memory unit for clarity (rhbz#796526)
  - storage: Support more scaling suffixes (rhbz#796526)
  - xml: Drop unenforced minimum memory limit from RNG (rhbz#796526)
  - xml: Use long long internally, to centralize overflow checks (rhbz#796526)
  - xml: Use better types for memory values (rhbz#796526)
  - xml: Allow scaled memory on input (rhbz#796526)
  - virsh: Add option aliases (rhbz#796526)
  - virsh: Use option aliases (rhbz#796526)
  - virsh: Add command aliases, and rename nodedev-detach (rhbz#796526)
  - virsh: Improve storage unit parsing (rhbz#796526)
  - virsh: Improve memory unit parsing (rhbz#796526)
  - qemuBuildCommandLine: Don't add tlsPort if none set (rhbz#801443)
  - Removed more AMD-specific features from cpu64-rhel* models (rhbz#768450)
  - qemu: Support disk filenames with comma (rhbz#801970)
  - cpustats: Collect VM user and sys times (miss python bindings) (rhbz#800366)
  - cpustats: Report user and sys times (rhbz#800366)
  - qemu: Fix (managed)save and snapshots with host mode CPU (rhbz#801160)
  - qemu: Make block io tuning smarter (rhbz#770683)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-6.el6
changelog:
  - cpu: Add new flag supported by qemu to the cpu definition (rhbz#767364)
  - Added support for AMD Bulldozer CPU (rhbz#767364)
  - graphics: Cleanup port policy (rhbz#801443)
  - qemu: Reverse condition in qemuDomainCheckDiskPresence (rhbz#798938)
  - cpu: Add cpu definition for Intel Sandy Bridge cpu type (rhbz#761005)
  - cpu: Disable tsc-deadline feature not supported in qemu on RHEL 6.3 (rhbz#761005)
  - qemu: Support numad (rhbz#769930)
  - numad: Fix typo and warning (rhbz#769930)
  - qemu: Use scsi-block for lun passthrough instead of scsi-disk (rhbz#782034)
  - util: Make virDomainLeaseDefFree global (rhbz#802851)
  - qemu: Don't 'remove' hostdev objects from domain if operation fails (rhbz#802851)
  - util: Eliminate device object leaks related to virDomain*Remove*() (rhbz#802851)
  - virsh: Fix invalid free (rhbz#803591)
  - qemu: Eliminate memory leak in qemuDomainUpdateDeviceConfig (rhbz#802854)
  - qemu: Support persistent hotplug of <hostdev> devices (rhbz#802856)
  - qemu: Fix segfault when detaching non-existent network device (rhbz#802644)
  - remote: Fix migration leaks (rhbz#798497)
  - virsh: Trim aliases from -h output (rhbz#796526)
  - Fix handling of blkio deviceWeight empty string (rhbz#804028)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-7.el6
changelog:
  - snapshot: Make quiesce a bit safer (rhbz#804210)
  - python: Avoid memory leaks on libvirt_virNodeGetMemoryStats (rhbz#770944)
  - qemu: Use unlimited speed when migrating to file (rhbz#740099)
  - qemu: Add support for domain cleanup callbacks (rhbz#795305)
  - qemu: Avoid dangling migration-in job on shutoff domains (rhbz#795305)
  - qemu: Add connection close callbacks (rhbz#795305)
  - qemu: Make autodestroy utilize connection close callbacks (rhbz#795305)
  - qemu: Avoid dangling migration-out job when client dies (rhbz#795305)
  - python: Avoid memory leaks on libvirt_virNodeGetCPUStats (rhbz#770943)
  - util: Consolidate duplicated error messages in virnetlink.c (rhbz#693842)
  - python: Add virDomainGetCPUStats python binding API (rhbz#800366)
  - snapshot: Add qemu capability for 'transaction' command (rhbz#782457)
  - snapshot: Add atomic create flag (rhbz#782457)
  - snapshot: Make offline qemu snapshots atomic (rhbz#782457)
  - snapshot: Rudimentary qemu support for atomic disk snapshot (rhbz#782457)
  - snapshot: Add support for qemu transaction command (rhbz#782457)
  - snapshot: Wire up qemu transaction command (rhbz#782457)
  - snapshot: Improve qemu handling of reused snapshot targets (rhbz#782457)
  - Clarify virsh freecell manpage entry (rhbz#698521)
  - Add support for event tray moved of removable disks (rhbz#575160)
  - docs: Add documentation for new attribute tray of disk target (rhbz#575160)
  - conf: Parse and for the tray attribute (rhbz#575160)
  - qemu: Do not start with source for removable disks if tray is open (rhbz#575160)
  - qemu: Prohibit setting tray status as open for block type disk (rhbz#575160)
  - qemu: Update tray status while tray moved event is emitted (rhbz#575160)
  - build: Fix incorrect enum declaration (rhbz#575160)
  - spec: Add missed dependancy for numad (rhbz#769930)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-9.el6
changelog:
  - qemu: Avoid entering monitor with locked driver (rhbz#803186)
  - snapshot: Don't pass NULL to QMP command creation (rhbz#807147)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-10.el6
changelog:
  - python: Add new helper functions for python to C conversion (rhbz#807751)
  - python: Make python APIs use these helper functions (rhbz#807751)
  - python: Improve conversion validation (rhbz#807751)
  - qemu_agent: Issue guest-sync prior to every command (rhbz#808527)
  - qemu: Fix memory leak in virDomainGetVcpus (rhbz#808979)
  - qemu: Reflect any memory rounding back to xml (rhbz#808522)
  - conf: Allow fuzz in XML with cur balloon > max (rhbz#808522)
  - qemu: Start nested job in qemuDomainCheckEjectableMedia (rhbz#803186)
  - virsh: Clarify escape sequence (rhbz#808652)
  - virsh: Plug memory leaks on failure path (rhbz#807555)
  - conf: Prevent crash of libvirtd without channel target name (rhbz#808371)
  - qemu: Don't leak temporary list of USB devices (rhbz#808459)
  - qemu: Delete USB devices used by domain on stop (rhbz#808459)
  - qemu: Build activeUsbHostdevs list on process reconnect (rhbz#808459)
  - qemu: Fix virtio+macvtap migration from 6.3 to older hosts (rhbz#806633)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-11.el6
changelog:
  - test: Fix segfault in networkxml2argvtest (rhbz#810100)
  - conf: Plug memory leaks on virDomainDiskDefParseXML (rhbz#575160)
  - qemu_ga: Don't overwrite errors on FSThaw (rhbz#808527)
  - Fix parallel build in docs/ directory (rhbz#810559)
  - qemu: Make migration fail when port profile association fails on the dst host (rhbz#811026)
  - Wire up <loader> to set the QEMU BIOS path (rhbz#811227)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-12.el6
changelog:
  - blockjob: Add qemu capabilities related to block pull jobs (rhbz#811683)
  - blockjob: Add API for async virDomainBlockJobAbort (rhbz#811683)
  - blockjob: Optimize JSON event handler lookup (rhbz#811683)
  - blockjob: Wire up qemu async virDomainBlockJobAbort (rhbz#811683)
  - blockjob: Allow for fast-finishing job (rhbz#811683)
  - virsh: Minor syntactic cleanups (rhbz#811683)
  - qemu: Use consistent error when qemu binary is too old (rhbz#811683)
  - blockjob: Add virsh blockpull --wait (rhbz#811683)
  - qemu: Fix deadlock when qemuDomainOpenConsole cleans up a connection (rhbz#811497)
  - qemu: Fix deadlock when qemuDomainOpenConsole cleans up a connection (rhbz#811497)
  - qemu: Fix mem leak in qemuProcessInitCpuAffinity (rhbz#810157)
  - numad: Convert node list to cpumap before setting affinity (rhbz#810157)
  - numad: Ignore cpuset if placement is auto (rhbz#810157)
  - conf: Do not parse cpuset only if the placement is auto (rhbz#810157)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-13.el6
changelog:
  - Fix a problem in the patchset, rhbz#811497 one was applied twice in -12
  - qemu, util: On restart of libvirt restart vepa callbacks (rhbz#812430)
  - qemu, util: Fix netlink callback registration for migration (rhbz#812430)
  - util: Only register callbacks for CREATE operations in virnetdevmacvlan.c (rhbz#812430)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-14.el6
changelog:
  - blockjob: Add new API flags (rhbz#638506)
  - blockjob: Add 'blockcopy' to virsh (rhbz#638506)
  - blockjob: Enhance xml to track mirrors across libvirtd restart (rhbz#638506)
  - blockjob: React to active block copy (rhbz#638506)
  - blockjob: Add qemu capabilities related to block jobs (rhbz#638506)
  - blockjob: Return appropriate event and info (rhbz#638506)
  - blockjob: Support pivot operation on cancel (rhbz#638506)
  - blockjob: Make drive-reopen safer (rhbz#638506)
  - blockjob: Implement block copy for qemu (rhbz#638506)
  - blockjob: Allow for existing files (rhbz#638506)
  - blockjob: Allow mirroring under SELinux (rhbz#638506)
  - blockjob: Accommodate RHEL backport names (rhbz#638506)
  - virsh: Avoid strtol (rhbz#813972)
  - conf: Tighten up XML integer parsing (rhbz#813972)
  - snapshot: Fix memory leak on error (rhbz#782457)
  - virsh: Avoid uninitialized memory usage (rhbz#814080)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-15.el6
changelog:
  - qemu: Improve errors related to offline domains (rhbz#816662)
  - blockjob: Check for active vm before checking blockcopy bits (rhbz#816662)
  - qemu: Preserve original error during migration (rhbz#807907)
  - rpc: Discard non-blocking calls only when necessary (rhbz#807907)
  - qemu: Fix detection of failed migration (rhbz#807907)
  - qemu: Avoid bogus error at the end of tunnelled migration (rhbz#807907)
  - qemu: Make sure qemu can access its directory in hugetlbfs (rhbz#815206)
  - virsh: Fix docs for list command (rhbz#814021)
  - virsh: Fix and clarify the --title flag for the list command in man page (rhbz#814021)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-16.el6
changelog:
  - qemuOpenFile: Don't force chown on NFS (rhbz#810241)
  - util: Fix crash when starting macvtap interfaces (rhbz#815270)
  - qemu: Fix segfault when host CPU is empty (rhbz#817078)
  - blockjob: Allow speed setting in block copy (rhbz#815791)
  - blockjob: Fix block-stream bandwidth race (rhbz#815791)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-17.el6
changelog:
  - qemu: Don't modify domain on failed blockiotune (rhbz#819014)
  - qemu: Reject blockiotune if qemu too old (rhbz#819014)
  - qemu: Don't use virDomainDefFormat* directly (rhbz#815503)
  - qemu: Emit compatible XML when migrating a domain (rhbz#815503)
  - usb: Create functions to search usb device accurately (rhbz#815755)
  - qemu: Call usb search function for hostdev initialization and hotplug (rhbz#815755)
  - virsh: Avoid heap corruption leading to virsh abort (rhbz#819636)
  - util: Fix libvirtd startup failure due to netlink error (rhbz#816465)
  - util: Allow specifying both src and dst pid in virNetlinkCommand (rhbz#816465)
  - util: Function to get local nl_pid used by netlink event socket (rhbz#816465)
  - util: Set src_pid for virNetlinkCommand when appropriate (rhbz#816465)
  - domain_conf: Add "usbredir" to list of valid spice channels (rhbz#819498)
  - domain_conf: Add "default" to list of valid spice channels (rhbz#819499)
  - snapshot: Allow block devices past cgroup (rhbz#810200)
  - blockjob: Allow block devices past cgroup (rhbz#810200)
  - util: Avoid libvirtd crash in virNetDevTapCreate (rhbz#817234)
  - python: Fix the forward_null error in Python binding codes (rhbz#771021)
  - xen: Fix resource leak in xen driver (rhbz#771021)
  - test: Fix resource leak in test driver (rhbz#771021)
  - node: Fix resource leak in nodeinfo.c (rhbz#771021)
  - virnet: Fix resource leak in virnetlink.c (rhbz#771021)
  - vmx: Fix resource leak (rhbz#771021)
  - qemu: Fix resource leak (rhbz#771021)
  - uuid: Fix possible non-terminated string (rhbz#771021)
  - node_device: Fix possible non-terminated string (rhbz#771021)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-18.el6
changelog:
  - numad: Set memory policy from numad advisory nodeset (rhbz#810157)
  - numad: Copy 'placement' of <numatune> to <vcpu> by default (rhbz#810157)
  - numad: Always output 'placement' of <vcpu> (rhbz#810157)
  - qemu: Avoid the memory allocation and freeing (rhbz#810157)
  - numad: Divide cur_balloon by 1024 before passing it to numad (rhbz#810157)
  - numad: Check numactl-devel if compiled with numad support (rhbz#810157)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-19.el6
changelog:
  - build: Fix the typo in configure.ac (rhbz#820461)
  - qemu: Fix build when !HAVE_NUMACTL (rhbz#820461)
  - usb: Fix crash when failing to attach a second usb device (rhbz#815755)
  - qemu: Use the CPU index in capabilities to map NUMA node to cpu list. (rhbz#820461)
  - qemu: Set memory policy using cgroup if placement is auto (rhbz#820461)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-20.el6
changelog:
  - Fix virDomainDeviceInfoIsSet() to check all struct fields (rhbz#820869)
  - Fix logic for assigning PCI addresses to USB2 companion controllers (rhbz#820869)
  - Set a sensible default master start port for ehci companion controllers (rhbz#820869)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.10-21.el6
changelog:
  - qemu: Rollback on used USB devices (rhbz#743671)
  - qemu: Don't delete USB device on failed qemuPrepareHostdevUSBDevices (rhbz#743671)
  - Revert "rpc: Discard non-blocking calls only when necessary" (rhbz#821468)


author: Eric Blake <eblake@redhat.com> - libvirt-0.9.10-21.el6_3.1
changelog:
  - avoid closing uninitialized fd (rhbz#827050)
  - avoid fd leak (rhbz#827050)
  - command: avoid double close bugs (rhbz#827050)
  - fdstream: avoid double close bug (rhbz#827050)
  - command: check for fork error before closing fd (rhbz#827050)
  - qemu: avoid closing fd more than once (rhbz#827050)
  - Disable keepalives by default (rhbz#832184)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.9.13-1.el6
changelog:
  - first rebase for 6.4 more to come
  - kvm-guest failed to start; double-close bug in libvirt (rhbz#823716)
  - potential to deadlock libvirt on EPIPE (rhbz#827234)
  - fix keepalive issues (rhbz#832081)
  - CPU topology parsing bug on special NUMA platform (rhbz#828729)
  - libvirtd will crash when tight loop of hotplug/unplug PCI device (rhbz#822373)


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.10.0-0rc0.el6
changelog:
  - New build based on upstream snapshot 0.10.0-0rc0 (rhbz#836934)
  - Cleanup and rebase of the few RHEL-only patches


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.10.0-1.el6
changelog:
  - New build based on upstream release 0.10.0 (rhbz#836934)
  - agent: add qemuAgentArbitraryCommand() for general qemu agent command
  - Introduce virDomainPinEmulator and virDomainGetEmulatorPinInfo functions
  - network: use firewalld instead of iptables, when available
  - network: make network driver vlan-aware
  - esx: Implement network driver
  - Various LXC improvements
  - Add virDomainGetHostname
  - a lot of bug fixes, improvements and portability work


author: Daniel Veillard <veillard@redhat.com> - libvirt-0.10.2-1.el6
changelog:
  - New build based on upstream release 0.10.2 (rhbz#836934)
  - network: define new API virNetworkUpdate
  - add support for QEmu sandbox support
  - blockjob: add virDomainBlockCommit
  - New APIs to get/set Node memory parameters
  - new API virConnectListAllSecrets
  - new API virConnectListAllNWFilters
  - new API virConnectListAllNodeDevices
  - new API virConnectListAllInterfaces
  - new API virConnectListAllNetworks
  - new API virStoragePoolListAllVolumes
  - Add PMSUSPENDED life cycle event
  - new API virStorageListAllStoragePools
  - Add per-guest S3/S4 state configuration
  - qemu: Support for Block Device IO Limits
  - a lot of bug fixes, improvements and portability work


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-2.el6
changelog:
  - qemu: Wait for SPICE to migrate (rhbz#836135)
  - lxc: Correctly report active cgroups (rhbz#860907)
  - network: Backend for virNetworkUpdate of interface list (rhbz#844404)
  - Fix start of containers with custom root filesystem (rhbz#861564)
  - Correct checking of virStrcpyStatic() return value (rhbz#864122)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-3.el6
changelog:
  - conf: Rename life cycle actions to event actions (rhbz#832156)
  - conf: Add on_lockfailure event configuration (rhbz#832156)
  - locking: Add const char * parameter to avoid ugly typecasts (rhbz#832156)
  - locking: Pass hypervisor driver name when acquiring locks (rhbz#832156)
  - locking: Add support for lock failure action (rhbz#832156)
  - locking: Implement lock failure action in sanlock driver (rhbz#832156)
  - conf: Add support for startupPolicy for USB devices (rhbz#843560)
  - qemu: Introduce qemuFindHostdevUSBDevice (rhbz#843560)
  - qemu: Add option to treat missing USB devices as success (rhbz#843560)
  - qemu: Implement startupPolicy for USB passed through devices (rhbz#843560)
  - Add MIGRATABLE flag for virDomainGetXMLDesc (rhbz#843560)
  - qemu: Make save/restore with USB devices usable (rhbz#843560)
  - conf: Mark missing optional USB devices in domain XML (rhbz#843560)
  - security: Also parse user/group names instead of just IDs for DAC labels (rhbz#860519)
  - doc: Update description about security labels on formatdomain.html (rhbz#860519)
  - util: Extend virGetUserID and virGetGroupID to support names and IDs (rhbz#860519)
  - security: Update user and group parsing in security_dac.c (rhbz#860519)
  - doc: Update description about user/group in qemu.conf (rhbz#860519)
  - Fix kvm_pv_eoi with kvmclock (rhbz#860971)
  - Change qemuSetSchedularParameters to use AFFECT_CURRENT (rhbz#852260)
  - Fix handling of itanium arch name in QEMU driver (rhbz#863115)
  - Add a qemu capabilities cache manager (rhbz#863115)
  - Switch over to use cache for building QEMU capabilities (rhbz#863115)
  - Remove probing of flags when launching QEMU guests (rhbz#863115)
  - Remove probing of machine types when canonicalizing XML (rhbz#863115)
  - Remove probing of CPU models when launching QEMU guests (rhbz#863115)
  - Make qemuCapsProbeMachineTypes & qemuCapsProbeCPUModels static (rhbz#863115)
  - Remove xenner support (rhbz#863115)
  - Refactor guest init to support qemu-system-i386 binary too (rhbz#863115)
  - Add a qemuMonitorGetVersion() method for QMP query-version command (rhbz#863115)
  - Add a qemuMonitorGetMachines() method for QMP query-machines command (rhbz#863115)
  - Add a qemuMonitorGetCPUDefinitions method for QMP query-cpu-definitions command (rhbz#863115)
  - Add a qemuMonitorGetCommands() method for QMP query-commands command (rhbz#863115)
  - Add a qemuMonitorGetEvents() method for QMP query-events command (rhbz#863115)
  - Add a qemuMonitorGetObjectTypes() method for QMP qom-list-types command (rhbz#863115)
  - Add a qemuMonitorGetObjectProps() method for QMP device-list-properties command (rhbz#863115)
  - Add a qemuMonitorGetTargetArch() method for QMP query-target command (rhbz#863115)
  - Remove some unused includes in QEMU code (rhbz#863115)
  - Move command/event capabilities detection out of QEMU monitor code (rhbz#863115)
  - Fix regression starting QEMU instances without query-events (rhbz#863115)
  - Refactor qemuCapsParseDeviceStr to work from data tables (rhbz#863115)
  - Fix QEMU test with 1.2.0 help output (rhbz#863115)
  - Ignore error from query-cpu-definitions (rhbz#863115)
  - Fix potential deadlock when agent is closed (rhbz#859712)
  - Fix (rare) deadlock in QEMU monitor callbacks (rhbz#859712)
  - Convert virLXCMonitor to use virObject (rhbz#864336)
  - Remove pointless virLXCProcessMonitorDestroy method (rhbz#864336)
  - Simplify some redundant locking while unref'ing objects (rhbz#859712)
  - Fix deadlock in handling EOF in LXC monitor (rhbz#864336)
  - Avoid bogus I/O event errors when closing the QEMU monitor (rhbz#859712)
  - qemu: Fix parsing of x86 CPU models (rhbz#864097)
  - python: Keep consistent handling of Python integer conversion (rhbz#816609)
  - esx: Fix and improve esxListAllDomains function (rhbz#864384)
  - virsh: Block SIGINT while getting BlockJobInfo (rhbz#845448)
  - spec: Add support for libssh2 transport (rhbz#513363)
  - Revert "Use XDG Base Directories instead of storing in home directory" (rhbz#859331)
  - doc: Sort out the relationship between <vcpu>, <vcpupin>, and <emulatorpin> (rhbz#855218)
  - conf: Ignore vcpupin for not onlined vcpus when parsing (rhbz#855218)
  - conf: Initialize the pinning policy for vcpus (rhbz#855218)
  - qemu: Create or remove cgroup when doing vcpu hotpluging (rhbz#857013)
  - qemu: Initialize cpuset for hotplugged vcpu as def->cpuset (rhbz#855218)
  - conf: Ignore emulatorpin if vcpu placement is auto (rhbz#855218)
  - qemu: Ignore def->cpumask if emulatorpin is specified (rhbz#855218)
  - Avoid straying </cpuset> (rhbz#855218)
  - conf: Fix virDevicePCIAddressEqual args (rhbz#805071)
  - conf: VirDomainDeviceInfoCopy utility function (rhbz#805071)
  - qemu: Reorganize qemuDomainChangeNet and qemuDomainChangeNetBridge (rhbz#805071)
  - Add support for SUSPEND_DISK event (rhbz#839661)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-4.el6
changelog:
  - node_memory: Add new parameter field to tune the new sysfs knob (rhbz#840113)
  - daemon: Fix removing abstract namespaces (rhbz#859331)
  - tests: Fix domain-events python test (rhbz#839661)
  - conf: Fix crash with cleanup (rhbz#866288)
  - spec: Add runtime requirement for libssh2 (rhbz#866508)
  - spec: Require newer sanlock on recent distros (rhbz#832156)
  - spec: Require newer sanlock on recent distros 2 (rhbz#832156)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-5.el6
changelog:
  - qemu: Clear async job when p2p migration fails early (rhbz#867412)
  - qemu: Pin the emulator when only cpuset is specified (rhbz#867372)
  - qemu: Correctly wait for spice to migrate (rhbz#867724)
  - qemu: Fixed default machine detection in qemuCapsParseMachineTypesStr (rhbz#867764)
  - conf: Make tri-state feature options more universal (rhbz#864606)
  - conf: Add support for HyperV Enlightenment features (rhbz#864606)
  - qemu: Add support for HyperV Enlightenment feature "relaxed" (rhbz#864606)
  - network: Set to NULL after virNetworkDefFree() (rhbz#866364)
  - qemu: Always format CPU topology (rhbz#866999)
  - qemu: Don't fail without emulatorpin or cpumask (rhbz#867372)
  - qemu: Allow migration with host USB devices (rhbz#843560)
  - qemu: Do not require hostuuid in migration cookie (rhbz#863059)
  - network: Free/null newDef if network fails to start (rhbz#866364)
  - migrate: v2: Use VIR_DOMAIN_XML_MIGRATABLE when available (rhbz#856864)
  - qemu: Avoid holding the driver lock in trivial snapshot API's (rhbz#772088)
  - storage: List more file types (rhbz#772088)
  - storage: Treat 'aio' like 'raw' at parse time (rhbz#772088)
  - storage: Match RNG to supported driver types (rhbz#772088)
  - storage: Use enum for default driver type (rhbz#772088)
  - storage: Use enum for disk driver type (rhbz#772088)
  - storage: Use enum for snapshot driver type (rhbz#772088)
  - storage: Don't probe non-files (rhbz#772088)
  - storage: Get entire metadata chain in one call (rhbz#772088)
  - storage: Don't require caller to pre-allocate metadata struct (rhbz#772088)
  - storage: Remember relative names in backing chain (rhbz#772088)
  - storage: Make it easier to find file within chain (rhbz#772088)
  - storage: Cache backing chain while qemu domain is live (rhbz#772088)
  - storage: Use cache to walk backing chain (rhbz#772088)
  - blockjob: Remove unused parameters after previous patch (rhbz#772088)
  - blockjob: Manage qemu block-commit monitor command (rhbz#772088)
  - blockjob: Wire up online qemu block-commit (rhbz#772088)
  - blockjob: Implement shallow commit flag in qemu (rhbz#772088)
  - blockjob: Refactor qemu disk chain permission grants (rhbz#772088)
  - blockjob: Properly label disks for qemu block-commit (rhbz#772088)
  - blockjob: Avoid segv on early error (rhbz#772088)
  - blockjob: Accommodate early RHEL backport naming (rhbz#772088)
  - virsh: Fix segfault of snapshot-list (rhbz#837544)
  - network: Always create dnsmasq hosts and addnhosts files, even if empty (rhbz#868389)
  - network: Don't allow multiple default portgroups (rhbz#868483)
  - selinux: Use raw contexts (rhbz#851981)
  - selinux: Add security selinux function to label tapfd (rhbz#851981)
  - selinux: Use raw contexts 2 (rhbz#851981)
  - selinux: Fix wrong tapfd relablling (rhbz#851981)
  - selinux: Remove unused variables in socket labelling (rhbz#851981)
  - selinux: Relabel tapfd in qemuPhysIfaceConnect (rhbz#851981)
  - storage: Let format probing work on root-squash NFS (rhbz#856247)
  - snapshot: Sanity check when reusing file for snapshot (rhbz#856247)
  - blockjob: Add qemu capabilities related to block jobs (rhbz#856247)
  - blockjob: React to active block copy (rhbz#856247)
  - blockjob: Return appropriate event and info (rhbz#856247)
  - blockjob: Support pivot operation on cancel (rhbz#856247)
  - blockjob: Make drive-reopen safer (rhbz#856247)
  - blockjob: Implement block copy for qemu (rhbz#856247)
  - blockjob: Allow for existing files in block-copy (rhbz#856247)
  - blockjob: Allow mirroring under SELinux and cgroup (rhbz#856247)
  - blockjob: Relabel entire existing chain (rhbz#856247)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-6.el6
changelog:
  - xml: Omit domain name from comment if it contains double hyphen (rhbz#868692)
  - cpu: Add recently added cpu feature flags. (rhbz#797283)
  - esx: Update version checks for vSphere 5.1 (rhbz#865670)
  - qemu: Add helper to prepare cpumap for affinity setting (rhbz#869096)
  - qemu: Keep the affinity when creating cgroup for emulator thread (rhbz#869096)
  - qemu: Prohibit chaning affinity of domain process if placement is 'auto' (rhbz#870099)
  - network: Fix networkValidate check for default portgroup and vlan (rhbz#868483)
  - qemu: Fix attach/detach of netdevs with matching mac addrs (rhbz#862515)
  - snapshot: Improve snapshot-list error message (rhbz#869100)
  - virsh: Remove --flags from nodesuspend (rhbz#869508)
  - virsh: Fix POD syntax (rhbz#870273)
  - xml: Print uuids in the warning (rhbz#868692)
  - blockjob: Support both RHEL and upstream qemu drive-mirror (rhbz#871055)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-7.el6
changelog:
  - sanlock: Introduce 'user' and 'group' conf variables (rhbz#820173)
  - esx: Fix connection to ESX 5.1 (rhbz#865670)
  - cpu: Fix definition of flag smap (rhbz#797283)
  - util: Do a better job of matching up pids with their binaries (rhbz#871201)
  - qemu: Fix EmulatorPinInfo without emulatorpin (rhbz#871312)
  - build: Fix RPM build for non-x86 platforms (rhbz#820173)
  - qemu: Report errors from iohelper (rhbz#866369)
  - build: Fix linking with systemtap probes (rhbz#866369)
  - iohelper: Fdatasync() at the end (rhbz#866369)
  - net-update docs: S/domain/network/ (rhbz#872104)
  - cpu: Add newly added cpu flags (rhbz#838127)
  - cpu: Add AMD Opteron G5 cpu model (rhbz#838127)
  - cpu: Add Intel Haswell cpu model (rhbz#843087)
  - snapshot: New XML for external system checkpoint (rhbz#638512)
  - snapshot: Improve disk align checking (rhbz#638512)
  - snapshot: Populate new XML info for qemu snapshots (rhbz#638512)
  - snapshot: Merge pre-snapshot checks (rhbz#638512)
  - qemu: Fix possible race when pausing guest (rhbz#638512)
  - qemu: Clean up snapshot retrieval to use the new helper (rhbz#638512)
  - qemu: Split out domain memory saving code to allow reuse (rhbz#638512)
  - snapshot: Add flag to enable creating checkpoints in live state (rhbz#638512)
  - snapshot: qemu: Add async job type for snapshots (rhbz#638512)
  - snapshot: qemu: Rename qemuDomainSnapshotCreateActive (rhbz#638512)
  - snapshot: qemu: Add support for external checkpoints (rhbz#638512)
  - snapshot: qemu: Remove restrictions preventing external checkpoints (rhbz#638512)


author: Jiri Denemark <jdenemar@redhat.com> - libvirt-0.10.2-8.el6
changelog:
  - iohelper: Don't report errors on special FDs (rhbz#866369)
  - esx: Yet another connection fix for 5.1 (rhbz#873538)
  - qemu: Don't corrupt pointer in qemuDomainSaveMemory() (rhbz#873537)
  - build: Place attributes in correct location (rhbz#873934)
  - Introduce new VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR event (rhbz#866388)
  - qemu: Emit event if 'cont' fails (rhbz#866388)
  - virsh: Make ,, escape parsing common (rhbz#874171)
  - virsh: Add snapshot-create-as memspec support (rhbz#874171)
  - qemu: Fix domain ID numbering race condition (rhbz#874330)
  - qemu: Allow migration to be cancelled at prepare phase (rhbz#873792)
  - AbortJob: Fix documentation (rhbz#873792)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-9
changelog:
  - util: Improve error reporting from absolutePathFromBaseFile helper (rhbz#874860)
  - storage: Fix broken backing chain (rhbz#874860)
  - nodeinfo: Add check and workaround to guarantee valid cpu topologies (rhbz#874050)
  - nodeinfotest: Add test data for 2 processor host with broken NUMA (rhbz#874050)
  - nodeinfotest: Add test data from a AMD bulldozer machine. (rhbz#874050)
  - virsh: save: Report an error if XML file can't be read (rhbz#876868)
  - virsh: Fix uninitialized variable in cmdSnapshotEdit (rhbz#877303)
  - qemu: Allow larger discrepency between memory & currentMemory in domain xml (rhbz#873134)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-10
changelog:
  - Add note about numeric domain names to manpage (rhbz#824253)
  - Use virNetServerRun instead of custom main loop (rhbz#867246)
  - qemu: Fix RBD attach regression (rhbz#878862)
  - qemu: Stop recursive detection of image chains when an image is missing (rhbz#878862)
  - Fix exiting of libvirt_lxc program on container quit (rhbz#879360)
  - snapshot: qemu: Add support for external inactive snapshots (rhbz#876816)
  - conf: Fix private symbols exported by files in conf (rhbz#876816)
  - snapshot: qemu: Fix detection of external snapshots when deleting (rhbz#876816)
  - snapshot: Require user to supply external memory file name (rhbz#876816)
  - snapshot: Add two more filter sets to API (rhbz#876817)
  - snapshot: Add virsh back-compat support for new filters (rhbz#876817)
  - snapshot: Implement new filter sets (rhbz#876817)
  - snapshot: Expose location through virsh snapshot-info (rhbz#876817)
  - sanlock: Retry after EINPROGRESS (rhbz#820173)
  - storage: Fix logical volume cloning (rhbz#879780)
  - cpu: Add Intel Haswell cpu model (fix previous downstream definition) (rhbz#879282)
  - virsh: Report error when taking a snapshot with empty --memspec argument (rhbz#879130)
  - lxc: Don't crash if no security driver is specified in libvirt_lxc (rhbz#880064)
  - lxc: Avoid segfault of libvirt_lxc helper on early cleanup paths (rhbz#880064)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-11
changelog:
  - Fix uninitialized variable in virLXCControllerSetupDevPTS (rhbz#880064)
  - storage: Fix device detach regression with cgroup ACLs (rhbz#876828)
  - storage: Fix bug of fs pool destroying (rhbz#878400)
  - qemu: Fix a crash when save file can't be opened (rhbz#880919)
  - bitmap: Fix typo to use UL type of integer constant in virBitmapIsAllSet (rhbz#876415)
  - virsh: Rewrite cmdDomDisplay (rhbz#878779)
  - network: Fix crash when portgroup has no name (rhbz#879473)
  - util: Capabilities detection for dnsmasq (rhbz#882265)
  - util: New virSocketAddrIsPrivate function (rhbz#882265)
  - network: Use dnsmasq --bind-dynamic when available (rhbz#882265)
  - storage: Fix scsi detach regression with cgroup ACLs (rhbz#876828)
  - libssh2_session: Support DSS keys as well (rhbz#878376)
  - virsh: Fix error messages in iface-bridge (rhbz#878376)
  - virsh: Check the return value of virStoragePoolGetAutostart (rhbz#878376)
  - conf: Check the return value of virXPathNodeSet (rhbz#878376)
  - conf: snapshot: Check return value of virDomainSnapshotObjListNum (rhbz#878376)
  - util: Fix virBitmap allocation in virProcessInfoGetAffinity (rhbz#878376)
  - virsh: Use correct sizeof when allocating cpumap (rhbz#878376)
  - rpc: Don't destroy xdr before creating it in virNetMessageEncodeHeader (rhbz#878376)
  - virsh: Do timing even for unusable connections (rhbz#878376)
  - conf: Fix uninitialized variable in virDomainListSnapshots (rhbz#878376)
  - Fix error handling in virSecurityManagerGetMountOptions (rhbz#878376)
  - conf: Prevent crash with no uuid in cephx auth secret (rhbz#878376)
  - conf: Fix virDomainNetGetActualDirect*() and BridgeName() (rhbz#881480)
  - virsh: Report errors if arguments of the schedinfo command are incorrect (rhbz#882915)
  - systemd: Require dbus service (rhbz#830201)
  - spec: Require dbus-daemon when using libvirtd in Fedora (rhbz#830201)
  - qemu: Don't free PCI device if adding it to activePciHostdevs fails (rhbz#877095)
  - util: Slightly refactor PCI list functions (rhbz#877095)
  - qemu: Fix memory (and FD) leak on PCI device detach (rhbz#877095)
  - util: Do not keep PCI device config file open (rhbz#877095)
  - node_memory: Improve the docs (rhbz#872656)
  - node_memory: Do not fail if there is parameter unsupported (rhbz#872656)
  - node_memory: Fix bug of node_memory_tune (rhbz#872656)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-12
changelog:
  - qemu: Eliminate bogus error log when changing netdev's bridge (rhbz#885838)
  - remote: Avoid the thread race condition (rhbz#866524)
  - storage: Error out earlier if the volume target path already exists (rhbz#832302)
  - dnsmasq: Fix parsing of the version number (rhbz#885727)
  - qemu: Restart CPUs with valid async job type when doing external snapshots (rhbz#885081)
  - examples: Fix balloon event callback (rhbz#884650)
  - util: Don't fail virGetGroupIDByName when group not found (rhbz#883832)
  - util: Don't fail virGetUserIDByName when user not found (rhbz#883832)
  - util: Rework error reporting in virGet(User|Group)IDByName (rhbz#883832)
  - util: Fix warning message in previous patch (rhbz#883832)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-13
changelog:
  - network: Prevent dnsmasq from listening on localhost (rhbz#886821)
  - sanlock: Re-add lockspace unconditionally (rhbz#820173)
  - Fix "virsh create" example (rhbz#887187)
  - docs: Fix some typos in examples (rhbz#887187)
  - network: Don't require private addresses if dnsmasq uses SO_BINDTODEVICE (rhbz#882265)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-14
changelog:
  - util: Add missing error log messages when failing to get netlink VFINFO (rhbz#889319)
  - util: Fix functions that retrieve SRIOV VF info (rhbz#889319)
  - util: Fix botched check for new netlink request filters (rhbz#889319)
  - blockjob: Fix memleak that prevented block pivot (rhbz#888426)
  - sanlock: Chown lease files as well (rhbz#820173)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-15
changelog:
  - snapshot: conf: Make virDomainSnapshotIsExternal more reusable (rhbz#889407)
  - snapshot: qemu: Separate logic blocks with newlines (rhbz#889407)
  - snapshot: qemu: Fix segfault and vanishing snapshots when redefining (rhbz#889407)
  - snapshot: qemu: Allow redefinition of external snapshots (rhbz#889407)
  - util: Prepare helpers for unpriv_sgio setting (rhbz#878578)
  - qemu: Add a hash table for the shared disks (rhbz#878578)
  - docs: Add docs and rng schema for new XML tag sgio (rhbz#878578)
  - conf: Parse and format the new XML (rhbz#878578)
  - qemu: Set unpriv_sgio when starting domain and attaching disk (rhbz#878578)
  - qemu: Check if the shared disk's cdbfilter conflicts with others (rhbz#878578)
  - qemu: Relax hard RSS limit (rhbz#891653)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-16
changelog:
  - qemu_agent: Remove agent reference only when disposing it (rhbz#892079)
  - Add RESUME event listener to qemu monitor. (rhbz#894085)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-17
changelog:
  - storage: Fix lvcreate parameter for backingStore. (rhbz#896398)
  - qemu: Don't return success if creation of snapshot save file fails (rhbz#896403)
  - qemu: Reject attempts to create snapshots with names containig '/' (rhbz#896403)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-18
changelog:
  - rpc: Fix crash on error paths of message dispatching (CVE-2013-0170)
  - spec: Disable libssh2 support (rhbz#513363)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-19
changelog:
  - xen: Resolve resource leak with 'cpuset' (rhbz#888503)
  - schema: Make the cpuset type reusable across schema files (rhbz#888503)
  - schemas: Add schemas for more CPU topology information in the caps XML (rhbz#888503)
  - conf: Split out NUMA topology formatting to simplify access to data (rhbz#888503)
  - capabilities: Switch CPU data in NUMA topology to a struct (rhbz#888503)
  - capabilities: Add additional data to the NUMA topology info (rhbz#888503)
  - test: Add support for thread and core information for the test driver (rhbz#888503)
  - xen: Initialize variable before using (rhbz#888503)
  - xen: Actually fix the uninitialized variable (rhbz#888503)
  - spice: Properly reserve tlsPort when no port specified (rhbz#913244)
  - qemu_agent: Ignore expected EOFs (rhbz#892079)
  - qemu: Nicer error message if live disk snapshot unsupported (rhbz#882077)
  - qemu: Destroy domain on decompression binary error (rhbz#894723)
  - qemu: Run lzop with '--ignore-warn' (rhbz#894723)
  - Don't ignore return value of qemuProcessKill (rhbz#903238)
  - Fix race condition when destroying guests (rhbz#903238)
  - Log warning if storage magic matches, but version does not (rhbz#903248)
  - Add lots of debugging to storage file probing code (rhbz#903248)
  - Fix probing of QED file format (rhbz#903248)
  - util: Add virendian.h macros (rhbz#903248)
  - util: Use new virendian.h macros (rhbz#903248)
  - storage: Rearrange functions (rhbz#903248)
  - storage: Prepare for refactoring (rhbz#903248)
  - storage: Refactor metadata lookup (rhbz#903248)
  - storage: Don't follow backing chain symlinks too eagerly (rhbz#903248)
  - storage: Test backing chain traversal (rhbz#903248)
  - qemu: Check backing chains even when cgroup is omitted (rhbz#896013)
  - python: Fix bindings for virDomainSnapshotGet{Domain,Connect} (rhbz#895882)
  - qemu: Add checking in helpers for sgio setting (rhbz#908073)
  - qemu: Merge qemuCheckSharedDisk into qemuAddSharedDisk (rhbz#908073)
  - qemu: Record names of domain which uses the shared disk in hash table (rhbz#908073)
  - qemu: Update shared disk table when reconnecting qemu process (rhbz#908073)
  - qemu: Move the shared disk adding and sgio setting prior to attaching (rhbz#908073)
  - qemu: Remove the shared disk entry if the operation is ejecting or updating (rhbz#908073)
  - qemu: Fix the memory leak (rhbz#908073)
  - Fix crash changing CDROM media (rhbz#908073)
  - qemu: Avoid NULL dereference in qemuSharedDiskEntryFree (rhbz#908073)
  - qemu: Do not set unpriv_sgio if neither supported nor requested (rhbz#914677)
  - Use size_t instead of int for virDomainDefPtr struct (rhbz#896604)
  - util: Add VIR_(APPEND|INSERT|DELETE)_ELEMENT (rhbz#896604)
  - qemu: Fix QMP detection of QXL graphics (rhbz#896604)
  - qemu: Add qemu vga devices caps and one cap to mark them usable (rhbz#896604)
  - conf: Add optional attribte primary to video <model> element (rhbz#896604)
  - qemu: Use newer -device video device in qemu commandline (rhbz#896604)
  - tests: Add one -device video device testcase (rhbz#896604)
  - qemu: Detect VGA_QXL capability correctly (rhbz#896604)
  - qemu: Support ram bar size for qxl devices (rhbz#896604)
  - conf: Don't leak 'primary' video property on error (rhbz#896604)
  - storage: lvm: Don't overwrite lvcreate errors (rhbz#912179)
  - storage: lvm: Lvcreate fails with allocation=0, don't do that (rhbz#912179)
  - storage: Cleanup logical volume creation code (rhbz#912179)
  - docs: Clarify semantics of sparse storage volumes (rhbz#912179)
  - storage: Fix memory leak with regfree(reg) call. (rhbz#906299)
  - storage: Resource resource leak using 'tmp_vols' (rhbz#906299)
  - interface: Resolve resource leak wth 'tmp_iface_objs' (rhbz#906299)
  - locking: Resolve resource leaks on non error path (rhbz#906299)
  - selinux: Resolve resource leak using the default disk label (rhbz#906299)
  - storage: Resolve resource leaks with cmd processing (rhbz#906299)
  - domain_conf: Resolve resource leaks found by Valgrind (rhbz#906299)
  - qemu_command: Resolve resource leaks found by Valgrind (rhbz#906299)
  - storage: Need to add virCommandFree() (rhbz#906299)
  - qemu: Fix startupPolicy regression (rhbz#896013)
  - util: Retry NLM_F_REQUEST with different values of IFLA_EXT_MASK (rhbz#923963)
  - security_manager: Don't manipulate domain XML in virDomainDefGetSecurityLabelDef (rhbz#923946)
  - security: Don't add seclabel of type none if there's already a seclabel (rhbz#923946)
  - libvirt_private.syms: Correctly export seclabel APIs (rhbz#923946)
  - security_manager.c: Append seclabel iff generated (rhbz#923946)
  - rpc: Fix client crash when server drops connection (rhbz#921538)
  - storage: Fix volume cloning for logical volume. (rhbz#948678)
  - qemu: Allow migration over IPv6 (rhbz#846013)
  - qemu: Set IPv6 migration capability when dump-guest-core is present (rhbz#846013)
  - remote: Don't call NULL closeFreeCallback (rhbz#911609)
  - libvirt: Increase connection reference count for callbacks (rhbz#911609)
  - virsh: Unregister the connection close notifier upon termination (rhbz#911609)
  - virsh: Move cmdConnect from virsh-host.c to virsh.c (rhbz#911609)
  - virsh: Register and unregister the close callback also in cmdConnect (rhbz#911609)
  - rpc: Fix connection close callback race condition and memory corruption/crash (rhbz#911609)
  - tests: Fix qemumonitorjsontest deadlock when the machine is under load (rhbz#951227)
  - Avoid use of free'd memory in auto destroy callback (rhbz#950286)
  - Fix crash in QEMU auto-destroy with transient guests (rhbz#950286)
  - daemon: Fix leak after listing volumes (CVE-2013-1962)
  - Don't try to add non-existant devices to ACL (rhbz#922153)
  - Avoid spamming logs with cgroups warnings (rhbz#922153)
  - audit: Properly encode device path in cgroup audit (rhbz#922203)
  - qemu: Set correct migrate host in client_migrate_info (rhbz#920441)
  - qemu: Fix crash in migration of graphics-less guests. (rhbz#920441)
  - Fix F_DUPFD_CLOEXEC operation args (rhbz#961034)
  - cgroup: Be robust against cgroup movement races (rhbz#903433)
  - virsocket: Introduce virSocketAddrIsWildcard (rhbz#920441)
  - qemuDomainMigrateGraphicsRelocate: Use then new virSocketAddrIsWildcard (rhbz#920441)
  - virSocketAddrIsWildcard: Use IN6_IS_ADDR_UNSPECIFIED correctly (rhbz#920441)
  - libvirt: lxc: Don't mkdir when selinux is disabled (rhbz#915485)
  - Don't mount selinux fs in LXC if selinux is disabled (rhbz#915485)
  - virsh: Don't print --(null) in vol-name and vol-pool (rhbz#924571)
  - virsh: Fix docs for "virsh setmaxmem" (rhbz#924648)
  - qemu: Remove managed save flag from VM when starting with --force-boot (rhbz#917510)
  - qemu: Don't update count of vCPUs if hot-unplug has failed (rhbz#895424)
  - conf: net: Fix deadlock if assignment of network def fails (rhbz#921777)
  - RPC: Support up to 16384 cpus on the host and 4096 in the guest (rhbz#960683)
  - conf: Don't fail to parse <boot> when parsing a single device (rhbz#895294)
  - conf: Allow for non-contiguous device boot orders (rhbz#889961)
  - qemuDomainChangeGraphics: Check listen address change by listen type (rhbz#976401)
  - build: Fix build with -Werror (rhbz#976401)
  - qemuDomainBlockStatsFlags: Guard disk lookup with a domain job (rhbz#916315)
  - qemu: Don't fail to shutdown domains with unresponsive agent (rhbz#889635)
  - qemu: Wrap controllers code into dummy loop (rhbz#870003)
  - qemu: Add controllers in specified order (rhbz#870003)
  - tests: Add test for controller order (rhbz#870003)
  - bandwidth: Attach sfq to leaf node (rhbz#895340)
  - bandwidth: Create hierarchical shaping classes (rhbz#895340)
  - remote: Forbid default "/session" connections when using ssh transport (rhbz#847822)
  - remote: Fix client crash when URI path is empty when using ssh (rhbz#847822)
  - udev: Fix crash in libudev logging (rhbz#971904)
  - iscsi: Don't leak portal string when starting a pool (rhbz#975392)
  - storage: Avoid double virCommandFree in virStorageBackendLogicalDeletePool (rhbz#921387)
  - manual: Fix copy-paste errors (rhbz#923613)
  - esx: Support virtualHW version 9 (rhbz#955575)
  - manual: Add info about migrateuri in virsh manual (rhbz#878765)
  - conf: Fix cpumask leak in virDomainDefFree (rhbz#977430)
  - qemu: Avoid leaking uri in qemuMigrationPrepareDirect (rhbz#977961)
  - Document that runtime changes may be lost after S4 suspend (rhbz#872419)
  - virsh iface-bridge: Ignore delay if stp is turned off (rhbz#892403)
  - virsh: Obey pool-or-uuid spec when creating volumes (rhbz#970495)
  - Add method for checking if a string is (probably) a log message (rhbz#954248)
  - Convert QEMU driver to use virLogProbablyLogMessage (rhbz#954248)
  - util: Escapes special characters in VIR_LOG_REGEX (rhbz#954248)
  - qemu: Move QEMU log reading into a separate function (rhbz#954248)
  - qemu: Ignore libvirt logs when reading QEMU error output (rhbz#954248)
  - logging: Make log regexp more compact (and readable) (rhbz#954248)
  - qemu: Do not report unsafe migration for local files (rhbz#913363)
  - Plug leak in virCgroupMoveTask (rhbz#978352)
  - Fix invalid read in virCgroupGetValueStr (rhbz#978356)
  - pci: Initialize virtual_functions array pointer to avoid segfault (rhbz#980339)
  - Node device driver: update driver name during dumpxml (rhbz#979330)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-20
changelog:
  - qemu: Don't force port=0 for SPICE (rhbz#975751)
  - qemu: Refactor graphics code to not hardcode a single display (rhbz#975751)
  - qemu: Graphics support for simultaneous one of each sdl, vnc, spice (rhbz#975751)
  - qemu: Don't miss errors when changing graphics passwords (rhbz#975751)
  - qemu: Allow seamless migration for domains with multiple graphics (rhbz#975751)
  - qemu_migration: Move waiting for SPICE migration (rhbz#920205)
  - util: Refactor iptables command construction into multiple steps (rhbz#851455)
  - net: Support set public ip range for forward mode nat (rhbz#851455)
  - net: Add support for specifying port range for forward mode nat (rhbz#851455)
  - qemu_migrate: Dispose listen address if set from config (rhbz#971485)
  - qemu: Remove maximum cpu limit when setting processor count using the API (rhbz#855296)
  - qemu_agent: Introduce helpers for agent based CPU hot(un)plug (rhbz#924400)
  - virsh-domain: Refactor cmdVcpucount and fix output on inactive domains (rhbz#924400)
  - API: Introduce VIR_DOMAIN_VCPU_AGENT, for agent based CPU hot(un)plug (rhbz#924400)
  - qemu: Implement request of vCPU state using the guest agent (rhbz#924400)
  - qemu: Implement support for VIR_DOMAIN_VCPU_AGENT in qemuDomainSetVcpusFlags (rhbz#924400)
  - qemuDomainGetVcpusFlags: Initialize ncpuinfo (rhbz#924400)
  - Fix commit 29c1e913e459058c12d02b3f4b767b3dd428a498 (rhbz#924400)
  - qemu: Make qemuMigrationIsAllowed more reusable (rhbz#972675)
  - qemu: Cancel migration if guest encoutners I/O error while migrating (rhbz#972675)
  - qemu: Forbid migration of machines with I/O errors (rhbz#972675)
  - migration: Make erroring out on I/O error controllable by flag (rhbz#972675)
  - migration: Don't propagate VIR_MIGRATE_ABORT_ON_ERROR (rhbz#972675)
  - Paused domain should remain paused after migration (rhbz#972675)
  - qemu: New vnc display sharing policy caps flag (rhbz#803602)
  - conf: Add 'sharePolicy' attribute to graphics element for vnc (rhbz#803602)
  - qemu: Add ', share=<policy>' to qemu commandline (rhbz#803602)
  - virsh: Distinguish errors between missing argument and wrong option (rhbz#924596)
  - virsh: Fix incorrect argument errors for long options (rhbz#924596)
  - virsh: Resolve Coverity 'MISSING_BREAK' (rhbz#924596)
  - virnetdev: Need to initialize 'pciConfigAddr' (rhbz#980339)
  - qemu: Fix double free in qemuMigrationPrepareDirect (rhbz#977961)
  - sec_manager: Refuse to start domain with unsupported seclabel (rhbz#947387)
  - usb: Don't spoil decimal addresses (rhbz#981503)
  - storage: Return -1 when fs pool can't be mounted (rhbz#983539)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-21
changelog:
  - conf: Avoid NULL deref for pmsuspended domain state (rhbz#822306)
  - libvirt: Define domain crash event types (rhbz#822306)
  - qemu: Refactor processWatchdogEvent (rhbz#822306)
  - qemu: Expose qemuProcessShutdownOrReboot() (rhbz#822306)
  - qemu: Implement 'oncrash' events when guest panicked (rhbz#822306)
  - qemu: Implement 'oncrash' coredump events when guest panicked (rhbz#822306)
  - conf: Fix a memory leak when parsing nat port XML nodes (rhbz#851455)
  - security_manager: Fix comparison (rhbz#984793)
  - qemu: Prevent crash of libvirtd without guest agent configuration (rhbz#984821)
  - qemu: Fix double free of returned JSON array in qemuAgentGetVCPUs() (rhbz#984821)
  - qemu_agent: Add support for appending arrays to commands (rhbz#924400)
  - Add support for locking domain's memory pages (rhbz#947118)
  - qemu: Implement support for locking domain's memory pages (rhbz#947118)
  - qemu: Check for -realtime mlock=on|off support (rhbz#947118)
  - qemu: Move memory limit computation to a reusable function (rhbz#947118)
  - util: New virCommandSetMax(MemLock|Processes|Files) (rhbz#947118)
  - qemu: Set RLIMIT_MEMLOCK when memoryBacking/locked is used (rhbz#947118)
  - Add Gluster protocol as supported network disk backend (rhbz#849796)
  - qemu: Add support for gluster protocol based network storage backend. (rhbz#849796)
  - tests: Add tests for gluster protocol based network disks support (rhbz#849796)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-22
changelog:
  - virsh: Fix change-media bug on disk block type (rhbz#923053)
  - Fix patches for multiple graphics and spice migration (rhbz#975751)
  - Revert "qemu: Remove maximum cpu limit when setting processor count using the API" (rhbz#855296)
  - Remove VIR_DOMAIN_SHUTDOWN_CRASHED from public API (rhbz#822306)
  - Rename VIR_DOMAIN_PAUSED_GUEST_PANICKED to VIR_DOMAIN_PAUSED_CRASHED (rhbz#822306)
  - Improve LXC startup error reporting (rhbz#903092)
  - qemu: Take error path if acquiring of job fails in qemuDomainSaveInternal (rhbz#928661)
  - util: Improve user lookup helper (rhbz#964359)
  - util: Add virGetGroupList (rhbz#964359)
  - util: Make virSetUIDGID async-signal-safe (rhbz#964359)
  - Fix potential deadlock across fork() in QEMU driver (rhbz#964359)
  - security: Framework for driver PreFork handler (rhbz#964359)
  - security_dac: Compute supplemental groups before fork (rhbz#964359)
  - security: Fix deadlock with prefork (rhbz#964359)
  - Split TLS test into two separate tests (rhbz#975201)
  - Avoid re-generating certs every time (rhbz#975201)
  - Change data passed into TLS test cases (rhbz#975201)
  - Fix validation of CA certificate chains (rhbz#975201)
  - Fix parallel runs of TLS test suites (rhbz#975201)
  - tests: Fix parallel runs of TLS test suites (rhbz#975201)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-23
changelog:
  - virnettlscontext: Resolve Coverity warnings (UNINIT) (rhbz#975201)
  - Fix qemuProcessReadLog with non-zero offset (rhbz#991334)
  - virSecurityManagerGenLabel: Skip seclabels without model (rhbz#997818)
  - bitmap: Add virBitmapCountBits (rhbz#997367)
  - virbitmap: Refactor virBitmapParse to avoid access beyond bounds of array (rhbz#997367)
  - virbitmaptest: Add test for out of bounds condition (rhbz#997367)
  - network: Allow <vlan> in type='hostdev' networks (rhbz#999107)
  - python: Fix bindings that don't raise an exception (rhbz#912170)
  - storage: Update pool metadata after adding/removing/resizing volume (rhbz#965442)
  - storage: Fix coverity warning (rhbz#965442)
  - storage: Fix the use-after-free memory bug (rhbz#965442)
  - network: Permit upstream forwarding of unqualified DNS names (rhbz#928638)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-24
changelog:
  - security: Provide supplemental groups even when parsing label (rhbz#964359)
  - qemu: Remove hostdev entry when freeing the depending network entry (rhbz#1000973)
  - virsh: Correct DESCRIPTION for virsh help blockcopy (rhbz#1002790)
  - Add '<nat>' element to '<forward>' network schemas (rhbz#1004365)
  - build: More workarounds for if_bridge.h (rhbz#1002735)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-25
changelog:
  - migration: Do not restore labels on failed migration (rhbz#895826)
  - qemu: Use default machine type if missing it in qemu command line (rhbz#995312)
  - qemu: Don't leak vm on failure (rhbz#995312)
  - virDomainDefParseXML: Set the argument of virBitmapFree to NULL after calling virBitmapFree (rhbz#1006710)
  - tests: Files named '.*-invalid.xml' should fail validation (rhbz#1006710)
  - tests: Use portable shell code (rhbz#1006710)
  - Add test for the nodemask double free crash (rhbz#1006710)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-26
changelog:
  - Fix crash in remoteDispatchDomainMemoryStats (CVE-2013-4296)
  - Introduce APIs for splitting/joining strings (rhbz#1006266)
  - Rename virKillProcess to virProcessKill (rhbz#1006266)
  - Rename virPid{Abort, Wait} to virProcess{Abort, Wait} (rhbz#1006266)
  - Rename virCommandTranslateStatus to virProcessTranslateStatus (rhbz#1006266)
  - Move virProcessKill into virprocess.{h, c} (rhbz#1006266)
  - Move virProcess{Kill, Abort, TranslateStatus} into virprocess.{c, h} (rhbz#1006266)
  - Include process start time when doing polkit checks (rhbz#1006266)
  - Add support for using 3-arg pkcheck syntax for process (CVE-2013-4311)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-28
changelog:
  - libvirt-guests: status: Return non-zero when stopped (rhbz#1011981)
  - qemu: Drop qemuDomainMemoryLimit (rhbz#1013758)
  - docs: Discourage users to set hard_limit (rhbz#1013758)
  - docs: Clean 09adfdc62de2b up (rhbz#1013758)
  - qemuSetupMemoryCgroup: Handle hard_limit properly (rhbz#1013758)
  - qemuBuildCommandLine: Fall back to mem balloon if there's no hard_limit (rhbz#1013758)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-29
changelog:
  - virNetDevBandwidthEqual: Make it more robust (rhbz#1014198)
  - qemu_hotplug: Allow QoS update in qemuDomainChangeNet (rhbz#1014198)
  - qemu: Generate correct name for hostdev network devices (rhbz#1001881)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-30
changelog:
  - Fix race in starting transient VMs (rhbz#1022924)
  - qemuDomainDestroyFlags: Don't allow @vm to disappear while executing API (rhbz#1030736)
  - python: return dictionary without value in case of no blockjob (rhbz#999454)
  - remote: fix regression in event deregistration (rhbz#1020372)
  - Add virtio-scsi to fallback models of scsi controller (rhbz#1014943)
  - qemu: Avoid operations on NULL monitor if VM fails early (rhbz#1047659)
  - qemu: Do not access stale data in virDomainBlockStats (CVE-2013-6458)
  - qemu: Avoid using stale data in virDomainGetBlockInfo (CVE-2013-6458)
  - qemu: Fix job usage in qemuDomainBlockJobImpl (CVE-2013-6458)
  - qemu: Fix job usage in qemuDomainBlockCopy (rhbz#1043069)
  - qemu: Fix job usage in virDomainGetBlockIoTune (CVE-2013-6458)
  - Don't crash if a connection closes early (CVE-2014-1447)
  - Really don't crash if a connection closes early (CVE-2014-1447)
  - Block info query: Add check for transient domain (rhbz#1040507)
  - network: only prevent forwarding of DNS requests for unqualified names (rhbz#1037741)
  - network: change default of forwardPlainNames to 'yes' (rhbz#1037741)
  - sanlock: Truncate domain names longer than SANLK_NAME_LEN (rhbz#1060557)
  - Remove contiguous CPU indexes assumption (rhbz#1066473)
  - qemu: monitor: Fix error message and comment when getting cpu info (rhbz#1066473)
  - qemu: monitor: Filter out thread ids of CPUS that were unplugged (rhbz#1066473)
  - qemu: monitor: Fix invalid parentheses (rhbz#1076719)
  - virNetClientSetTLSSession: Restore original signal mask (rhbz#1078589)
  - spec: Switch to "git am" for applying patches (rhbz#1076719)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-31
changelog:
  - doc: schema: Add basic documentation for the virtual RNG device support (rhbz#786408)
  - conf: Add support for RNG device configuration in XML (rhbz#786408)
  - conf: Add RNG device ABI compatibility check (rhbz#786408)
  - qemu: Implement support for default 'random' backend for virtio-rng (rhbz#786408)
  - qemu: Implement support for EGD backend for virtio-rng (rhbz#786408)
  - docs: domain: /dev/urandom isn't a valid rng patch (rhbz#786408)
  - tests: Add tests for virtio-rng device handling (rhbz#786408)
  - docs: Fix attribute name for virtio-rng backend (rhbz#786408)
  - rng: restrict passthrough names to known-good files (rhbz#786408)
  - Resolve valgrind error (rhbz#786408)
  - Fix crash parsing RNG device specification (rhbz#786408)
  - rng: allow default device in RNG grammar (rhbz#786408)
  - virtio-rng: Add rate limiting options for virtio-RNG (rhbz#786408)
  - qemu_caps: Enable virtio-rng for RHEL-6.6 qemu-kvm downstream (rhbz#786408)
  - audit: Audit resources used by VirtIO RNG (rhbz#786408)
  - virtio-rng: Remove double space in error message (rhbz#786408)
  - doc: fix XML for the RNG device example (rhbz#786408)
  - conf: Don't crash on invalid chardev source definition of RNGs and other (rhbz#786408)
  - conf: Fix XML formatting of RNG device info (rhbz#786408)
  - libvirt: fix error message when connection can't be opened (rhbz#851413)
  - conf: fix error for parallel port mismatch (rhbz#950830)
  - virsh: clarify vol-{down, up}load description (rhbz#955539)
  - virsh: fix doc typos (rhbz#1022872)
  - util: use string libvirt to prefix error message instead of libvir (rhbz#911996)
  - docs: use MiB/s instead of Mbps for migration speed (rhbz#948821)
  - schema: require target path in storage pool xml (rhbz#893273)
  - schema: make source optional in volume XML (rhbz#893273)
  - Add qxl ram size to ABI stability check (rhbz#1035134)
  - qemu: fix default spice password setting (rhbz#953721)
  - Expose ownership ID parsing (rhbz#963881)
  - Make qemuOpenFile aware of per-VM DAC seclabel. (rhbz#869053)
  - Use qemuOpenFile in qemu_driver.c (rhbz#963881)
  - virsh: Fix heading in manpage (rhbz#996840)
  - qemu: Change the default unix monitor timeout (rhbz#1051364)
  - qemu: fix live pinning to memory node on NUMA system (rhbz#857312)
  - qemu: Clean up qemuDomainSetNumaParameters (rhbz#857312)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-32
changelog:
  - virsh-snapshot: Reject --no-metadata together with --print-xml (rhbz#892508)
  - snapshot: Mention disk-only snapshots in error message (rhbz#880521)
  - qemu: snapshot: Report better error message if migration isn't allowed (rhbz#884926)
  - qemu: snapshot: Remove memory image if external checkpoint fails (rhbz#885963)
  - virsh-snapshot: Fix XPath query to determine snapshot state (rhbz#890457)
  - conf: Check if number of vCPUs fits in the storage variable (rhbz#902652)
  - conf: Improve error messages if parsing of vCPU count fails (rhbz#902652)
  - qemu: snapshot: Don't kill access to disk if snapshot creation fails (rhbz#906639)
  - qemu: Un-mark volume as mirrored/copied if blockjob copy fails (rhbz#923125)
  - qemu-blockjob: Fix limit of bandwidth for block jobs to supported value (rhbz#927160)
  - virsh: Fix typo in docs (rhbz#949776)
  - virsh-domain: Report errors on invalid --holdtime value for cmdSendKey (rhbz#952938)
  - qemu: Don't update count of vCPUs if hot-plug fails silently (rhbz#1000357)
  - virsh: man: Mention that volumes need to be in storage pool for undefine (rhbz#1044790)
  - Disable nwfilter driver when running unprivileged (rhbz#1029299)
  - storage: reduce number of stat calls (rhbz#977706)
  - Ignore missing files on pool refresh (rhbz#977706)
  - sanlock: add missing test command in virt-sanlock-cleanup.in (rhbz#1000890)
  - virt-sanlock-cleanup; Fix augtool usage (rhbz#1000890)
  - conf: Fix typo in error message in ABI stability check (rhbz#961655)
  - qemu: Improve error when setting invalid count of vcpus via agent (rhbz#1035109)
  - doc: Clarify usage of SELinux baselabel (rhbz#954245)
  - selinux: Don't mask errors of virSecuritySELinuxGenNewContext (rhbz#954245)
  - qemu: Return meaningful error when qemu dies early (rhbz#844378)
  - sanlock: Forbid VIR_DOMAIN_LOCK_FAILURE_IGNORE (rhbz#905280)
  - Remove the redundant parentheses in migrate help (rhbz#927497)
  - virt-xml-validate: add missing schemas (rhbz#1006699)
  - tools: add missing 'interface' type and update man page (rhbz#1006699)
  - qemu: Don't require a block or file when looking for an alias (rhbz#1078328)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-33
changelog:
  - conf: fix error for parallel port mismatch (rhbz#950830)
  - virDomainReboot: Document that migration might be unsafe (rhbz#744967)
  - interface: list all interfaces with flags == 0 (rhbz#884382)
  - Fix the syntax-check failure (rhbz#884382)
  - Crash of libvirtd by unprivileged user in virConnectListAllInterfaces (rhbz#884382)
  - qemuDomainObjStart: Warn on corrupted image (rhbz#1022008)
  - QoS: make tc filters match all traffic (rhbz#1084477)
  - conf: add support for booting from redirected USB devices (rhbz#1035190)
  - Add redirdevs to ABI stability check (rhbz#1035529)
  - Fix incorrect values in redirdev ABI check error (rhbz#1035529)
  - virSecurityLabelDefParseXML: Don't parse label on model='none' (rhbz#1027096)
  - storage: Skip inactive lv volumes (rhbz#748282)
  - Check for existence of interface prior to setting terminate flag (rhbz#903480)
  - storage: Avoid forward declaration of virStorageVolDelete (rhbz#1024159)
  - storage: Don't update pool available/allocation if buildVol fails (rhbz#1024159)
  - conf: Report errors on cputune parameter parsing (rhbz#1040784)
  - Treat zero cpu shares as a valid value (rhbz#1040784)
  - Show the real cpu shares value in live XML (rhbz#1040784)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-34
changelog:
  - nwfilter: Remove error report in virNWFilterDHCPSnoopEnd (rhbz#903480)
  - conf: introduce generic ISA address (rhbz#1033984)
  - conf: add support for panic device (rhbz#1033984)
  - qemu: add support for -device pvpanic (rhbz#1033984)
  - PanicCheckABIStability: Need to check for existence (rhbz#1033984)
  - use virBitmapFree instead of VIR_FREE for cpumask (rhbz#1088165)
  - Properly free vcpupin info for unplugged CPUs (rhbz#1088165)
  - Save domain status after cpu hotplug (rhbz#1088703)
  - Document behavior of setvcpus during guest boot (rhbz#1088748)
  - qemu: Use maximum guest memory size when getting NUMA placement advice (rhbz#1011906)
  - qemu: Properly format the uuid string in error messages (rhbz#947974)
  - qemu: Split out code to generate SPICE command line (rhbz#953126)
  - qemu: Improve handling of channels when generating SPICE command line (rhbz#953126)
  - qemu: Split out SPICE port allocation into a separate function (rhbz#953126)
  - qemu: Do sensible auto allocation of SPICE port numbers (rhbz#953126)
  - qemu: fix failure to start with spice graphics and no tls (rhbz#953126)
  - qemu: Do not ignore address for USB disks (rhbz#985166)
  - qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly (rhbz#985166)
  - qemu: refactor qemuDomainCheckDiskPresence for only disk presence check (rhbz#1014730)
  - qemu: add helper functions for diskchain checking (rhbz#1014730)
  - qemu: check presence of each disk and its backing file as well (rhbz#1014730)
  - conf: add startupPolicy attribute for harddisk (rhbz#1014730)
  - qemu: support to drop disk with 'optional' startupPolicy (rhbz#1014730)
  - qemu: Avoid overflow when setting migration speed (rhbz#1083483)
  - qemu: Avoid overflow when setting migration speed on inactive domains (rhbz#1083483)
  - caps: Add helpers to convert NUMA nodes to corresponding CPUs (rhbz#1012846)
  - qemu: Set cpuset.cpus for domain process (rhbz#1012846)
  - qemu: Unbreak p2p migration with complete migration URI (rhbz#1073227)
  - maint: don't lose error on canceled migration (rhbz#1073227)
  - virsh: suppress aliases in group help (rhbz#956968)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-35
changelog:
  - qemu: export disk snapshot support in capabilities (rhbz#1081032)
  - qemu: extract guest capabilities initialization (rhbz#1081032)
  - qemu: add unit tests for the capabilities xml (rhbz#1081032)
  - qemu: properly quit migration with abort_on_error (rhbz#1045833)
  - conf: restrict external snapshots to backing store formats (rhbz#1019926)
  - qemu: don't check for backing chains for formats w/o snapshot support (rhbz#1019926)
  - qemu: don't call virFileExists() for network type disks (rhbz#1019926)
  - net: Change argument type of virNetworkObjIsDuplicate() (rhbz#1057321)
  - net: Move creation of dnsmasq hosts file to function starting dnsmasq (rhbz#1057321)
  - net: Re-use checks when creating transient networks (rhbz#1057321)
  - network: prevent a few invalid configuration combinations (rhbz#1057321)
  - network: disallow <bandwidth>/<mac> for bridged/macvtap/hostdev networks (rhbz#1057321)
  - virsh-domain: Fix cmdSetvcpus error message (rhbz#1092412)
  - spice: detect if qemu can disable file transfer (rhbz#983018)
  - spice: expose the QEMU disable file transfer option (rhbz#983018)
  - qemu_caps: detect if qemu can disable file transfer for spice (rhbz#983018)
  - Device{Attach, Detach}: Document S4 limitations (rhbz#808463)
  - storageVolCreateXMLFrom: Allow multiple accesses to origvol (rhbz#1058700)
  - LSN-2014-0003: Don't expand entities when parsing XML (CVE-2014-0179)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-36
changelog:
  - virSecuritySELinuxSetFileconHelper: Don't fail on read-only NFS (rhbz#1095135)
  - storage: Resolve issues in failure path (rhbz#1092882)
  - interface: Introduce netcfInterfaceObjIsActive (rhbz#1095774)
  - interface: dump inactive xml when interface isn't active (rhbz#1095774)
  - qemu: add host-pci-multidomain capability (rhbz#1092390)
  - qemu: specify domain in host-side PCI addresses when needed/supported (rhbz#1092390)
  - util: fix virFileOpenAs return value and resulting error logs (rhbz#851411)
  - qemu: check actual netdev type rather than config netdev type during init (rhbz#1012834)
  - Fix parsing of bond interface XML (rhbz#1067062)
  - qemuSetupCgroup: Fix reference to cgroup (rhbz#1012846)
  - apibuild: Disallow 'returns' return decription (rhbz#808463)
  - ESX: Add support for virtualHW version 10 (rhbz#1089389)
  - storage: Ensure 'qemu-img resize' size arg is a 512 multiple (rhbz#1002813)
  - qemu: Adjust size for qcow2/qed if not on sector boundary (rhbz#1002813)
  - sanlock: code movement in virLockManagerSanlockAcquire (rhbz#1088034)
  - sanlock: don't fail with unregistered domains (rhbz#1088034)
  - sanlock: avoid leak in acquire() (rhbz#1088034)
  - networkStartNetwork: Be more verbose (rhbz#1064831)
  - network_conf: Expose virNetworkDefFormatInternal (rhbz#1064831)
  - Avoid crash when LXC start fails with no interface target (rhbz#1064831)
  - lxc_process: Avoid passing NULL iface->iname (rhbz#1064831)
  - network: Introduce network hooks (rhbz#1064831)
  - bridge_driver.h: Fix build --without-network (rhbz#1064831)
  - networkRunHook: Run hook only if possible (rhbz#1064831)
  - conf: clarify what is returned for actual bandwidth and vlan (rhbz#1064831)
  - conf: handle null pointer in virNetDevVlanFormat (rhbz#1064831)
  - conf: make virDomainNetDefFormat a public function (rhbz#1064831)
  - conf: re-situate <bandwidth> element in <interface> (rhbz#1064831)
  - conf: new function virDomainActualNetDefContentsFormat (rhbz#1064831)
  - Slightly refactor hostdev parsing / formating (rhbz#1064831)
  - conf: output actual netdev status in <interface> XML (rhbz#1064831)
  - network: include plugged interface XML in "plugged" network hook (rhbz#1064831)
  - network: don't even call networkRunHook if there is no network (rhbz#1064831)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-37
changelog:
  - udev: consider the device a CDROM when ID_CDROM=1 (rhbz#1016878)
  - Add support for timestamping QEMU logs (rhbz#997010)
  - Detect -msg-timestamp capability from QEMU help output (rhbz#997010)
  - qemu: Avoid leak in qemuDomainCheckRemoveOptionalDisk (rhbz#1014730)
  - Return right error code for baselineCPU (rhbz#1097969)
  - Add a port allocator class (rhbz#1018695)
  - Avoid integer wrap on remotePortMax in QEMU driver (rhbz#1018695)
  - Followup fix for integer wraparound in port allocator (rhbz#1018695)
  - Don't spam logs with "port 0 must be in range" errors (rhbz#1018695)
  - qemu: Avoid assigning unavailable migration ports (rhbz#1018695)
  - qemu: Make migration port range configurable (rhbz#1018695)
  - qemu: Fix augeas support for migration ports (rhbz#1018695)
  - qemu: clean up migration ports when migration cancelled (rhbz#1018695)
  - qemuDomainObjBeginJobInternal: Return -2 for temporary failures (rhbz#1083238)
  - qemu: Make qemuProcess{Start, Stop}CPUs easier to follow (rhbz#1083238)
  - qemu: Ignore temporary job errors when checking migration status (rhbz#1083238)
  - qemu: Send migrate_cancel when aborting migration (rhbz#1098833)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-38
changelog:
  - remote: Don't leak priv->tls object on connection failure (rhbz#1099075)
  - Fix invalid read in virNetSASLSessionClientStep debug log (rhbz#1100173)
  - Tie SASL callbacks lifecycle to virNetSessionSASLContext (rhbz#1100173)
  - fix leak in memoryStats with older python (rhbz#1099860)
  - hooks: let virCommand do the error reporting (rhbz#1105397)
  - SELinux: don't fail silently when no label is present (rhbz#1105954)
  - qemu: Add qemuDomainReleaseDeviceAddress to remove any address (rhbz#807023)
  - qemu: Separate disk device removal into a standalone function (rhbz#807023)
  - qemu: Separate controller removal into a standalone function (rhbz#807023)
  - qemu: Separate net device removal into a standalone function (rhbz#807023)
  - qemu: Separate host device removal into a standalone function (rhbz#807023)
  - Add VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED event (rhbz#807023)
  - examples: Handle VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED event (rhbz#807023)
  - Clarify virDomainDetachDeviceFlags documentation (rhbz#807023)
  - Add virDomainDefFindDevice for looking up a device by its alias (rhbz#807023)
  - qemu: Add support for DEVICE_DELETED event (rhbz#807023)
  - qemu: Remove devices only after DEVICE_DELETED event (rhbz#807023)
  - qemu: Emit VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED events (rhbz#807023)
  - Add function to find a needle in a string array (rhbz#807023)
  - util: Non-existent string array does not contain any string (rhbz#807023)
  - conf: Make error reporting in virDomainDefFindDevice optional (rhbz#807023)
  - qemu: Introduce qemuMonitorGetDeviceAliases (rhbz#807023)
  - qemu: Unplug devices that disappeared when libvirtd was down (rhbz#807023)
  - qemu: Finish device removal in the original thread (rhbz#807023)
  - qemu: Process DEVICE_DELETED event in a separate thread (rhbz#807023)
  - qemu: Remove interface backend only after frontend is gone (rhbz#807023)
  - qemu: Remove disk backend only after frontend is gone (rhbz#807023)
  - qemu: Return in from qemuDomainRemove*Device (rhbz#807023)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-39
changelog:
  - Fix crash when saving a domain with type none dac label (rhbz#1108590)
  - Initialize threading & error layer in LXC controller (rhbz#1109120)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-40
changelog:
  - formatdomain.html.in: Document implementation limitation of QoS (rhbz#980350)
  - Fix error in qemuDomainSetNumaParamsLive (rhbz#857312)
  - cpu: Add new Broadwell CPU model (rhbz#1100381)
  - docs: publish correct enum values (rhbz#1113316)
  - qemu: blockcopy: Don't remove existing disk mirror info (rhbz#1113828)
  - qemu: fix guestfwd chardev option back how it was (rhbz#1112066)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-41
changelog:
  - Add invariant TSC cpu flag (rhbz#996772)
  - Fix segfault when starting a domain with no cpu definition (rhbz#996772)
  - qemu: copy: Accept 'format' parameter when copying to a non-existing img (rhbz#1113828)
  - Bind connection close callback APIs to python binding (rhbz#1114619)
  - qemu: Factor out body of qemuDomainGetMetadata for universal use (rhbz#1115039)
  - qemu: Factor out body of qemuDomainSetMetadata for universal use (rhbz#1115039)
  - conf: Factor out setting of metadata to simplify code (rhbz#1115039)
  - util: Add helper to convert libxml2 nodes to a string (rhbz#1115039)
  - conf: Add support for requesting of XML metadata via the API (rhbz#1115039)
  - conf: allow to add XML metadata using the virDomainSetMetadata api (rhbz#1115039)
  - conf: Avoid false positive of uninitialized variable use (rhbz#1115039)
  - lib: Don't force the key argument when deleting metadata (rhbz#1115039)
  - test: Add <metadata> support into the test drivera (rhbz#1115039)
  - tests: Add metadata tests (rhbz#1115039)
  - conf: Don't corrupt metadata on OOM (rhbz#1115039)
  - Ignore additional fields in iscsiadm output (rhbz#1116741)
  - conf: net: Fix helper for applying new network definition (rhbz#1116754)
  - blockjob: wait for pivot to complete (rhbz#1119385)
  - virsh: Introduce macros to reject mutually exclusive arguments (rhbz#1117177)
  - virsh-domain: Add --live, --config, --current logic to cmdAttachDisk (rhbz#1117177)
  - virsh-domain: Add --live, --config, --current logic to cmdDetachDevice (rhbz#1117177)
  - virsh-domain: Add --live, --config, --current logic to cmdDetachDisk (rhbz#1117177)
  - virsh: Use inactive definition when removing disk from config (rhbz#1117177)
  - virsh-domain: Add --live, --config, --current logic to cmdAttachDevice (rhbz#1117177)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-42
changelog:
  - conf: Fix backport of metadata API code (rhbz#1115039)
  - conf: Always format seclabel's model (rhbz#1113860)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-43
changelog:
  - Fix blkdeviotune for shutoff domain (rhbz#1122819)
  - rpc: message related sizes enlarged (rhbz#1126393)
  - Increase the size of REMOTE_MIGRATE_COOKIE_MAX to REMOTE_STRING_MAX (rhbz#1126393)
  - Fix max stream packet size for old clients (rhbz#1126393)
  - Adjust legacy max payload size to account for header information (rhbz#1126393)
  - rpc: Correct the wrong payload size checking (rhbz#1126393)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-46
changelog:
  - cpu: separate host-model and host-passthrough (rhbz#1138222)
  - Don't include non-migratable features in host-model (rhbz#1138222)
  - Don't add dhcp hosts to hostsfile twice (rhbz#1137011)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-47
changelog:
  - Revert "qemu: export disk snapshot support in capabilities" (rhbz#1149667)
  - qemu: allow restore with non-migratable XML input (rhbz#1141838)
  - qemu: Introduce qemuDomainDefCheckABIStability (rhbz#1141838)
  - Make ABI stability issue easier to debug (rhbz#1141838)
  - domain_conf: fix domain deadlock (CVE-2014-3657)
  - CVE-2014-3633: qemu: blkiotune: Use correct definition when looking up disk (CVE-2014-3633)
  - CVE-2014-7823: dumpxml: security hole with migratable flag (CVE-2014-7823)
  - sanlock: Avoid freeing uninitialized value (rhbz#1136788)
  - virsh: Print cephx and iscsi usage (rhbz#1156327)
  - Fix bug with loading bridge name for active domain during libvirtd start (rhbz#1146310)
  - conf: Fix even implicit labels (rhbz#1138500)
  - tests: Add test cases for previous commit (rhbz#1138500)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-48
changelog:
  - networkValidate: Disallow bandwidth in portgroups too (rhbz#1115292)
  - qemu: Fix checking of ABI stability when restoring external checkpoints (rhbz#834196)
  - qemu: Use "migratable" XML definition when doing external checkpoints (rhbz#834196)
  - qemu: Fix memleak after commit 59898a88ce8431bd3ea249b8789edc2ef9985827 (rhbz#834196)
  - qemu: blkiotune: Avoid accessing non-existing disk configuration (rhbz#1131821)
  - qemu: Fix build error introduced in 653137eb957a278b556c6226424aad5395a (rhbz#1131821)
  - qemu: snapshot: Use better check when reverting external snapshots (rhbz#1124854)
  - virsh: domain: Use global constant for XML file size limit (rhbz#1134671)
  - selinux: Avoid label reservations for type = none (rhbz#1138488)
  - Clean up chardev sockets on QEMU shutdown (rhbz#1122367)
  - Don't include @LIBS@ in libvirt.pc.in file (rhbz#1134455)
  - qemu: save domain state to XML after reboot (rhbz#1169405)
  - virsh: Honour -q in domblklist, vcpupin and emulatorpin (rhbz#1135171)
  - virsh-domain: Flip logic in cmdSetvcpus (rhbz#1139114)
  - Fix possible memory leak in util/virxml.c (rhbz#1136729)
  - esx_vi: fix possible segfault (rhbz#1136729)
  - sasl: Fix authentication when using PLAIN mechanism (rhbz#1171521)
  - Fix leak in x86UpdateHostModel (rhbz#1144304)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-49
changelog:
  - nwfilter: utility function virNWFilterVarValueEqual (rhbz#1126487)
  - qemu: support live update of an interface's filter (rhbz#1126487)
  - qemu: Update fsfreeze status on domain state transitions (rhbz#1136251)
  - virsh: Fix semantics of --config for "update-device" command (rhbz#1129112)
  - virsh: Don't use legacy API if --current is used on device hot(un)plug (rhbz#1125194)
  - qemu: Avoid double serial output with RHEL 6 qemu (rhbz#1162759)
  - storage: Check the partition name against provided name (rhbz#1138523)
  - qemu: Don't unconditionally delete file in qemuOpenFileAs (rhbz#1158036)
  - conf: Don't mangle vcpu placement randomly (rhbz#1170495)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-50
changelog:
  - conf: Don't format actual network definition in migratable XML (rhbz#1186142)
  - network: don't allow multiple portgroups with the same name in a network (rhbz#1115858)
  - build: fix build with latest rawhide kernel headers (rhbz#1198698)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-51
changelog:
  - sanlock: Don't spam logs with "target pid not found" (rhbz#1189414)
  - nwfilter: fix crash when adding non-existing nwfilter (rhbz#1202703)
  - util: more verbose error when failing to create macvtap device (rhbz#1186142)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-52
changelog:
  - qemu: Keep QEMU host drive prefix in BlkIoTune (rhbz#1203633)
  - qemu: Fix name comparison in qemuMonitorJSONBlockIoThrottleInfo() (rhbz#1203633)
  - virsh: fix typos in virsh man page (rhbz#1130835)
  - schemas: Allow all generic elements and attributes for all interfaces (rhbz#1206066)
  - RNG: Allow multiple parameters to be passed to an interface filter (rhbz#1206066)
  - qemu_domain: fix startup policy for disks (rhbz#1203542)
  - Create directory for lease files if it's missing (rhbz#1200991)
  - qemu: cgroup: Properly set up vcpu pinning (rhbz#1198096)
  - cgroup: Add accessors for cpuset.memory_migrate (rhbz#1198497)
  - qemu: Fix possible crash (rhbz#1198497)
  - qemu: Migrate memory on numatune change (rhbz#1198497)
  - qemu: fix crash when removing <filterref> from interface with update-device (rhbz#1205042)
  - nwfilter: Fix rule priority problem (rhbz#1210183)
  - qemuProcessHook: Call qemuProcessInitNumaMemoryPolicy only when needed (rhbz#1198645)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-53
changelog:
  - RHEL: Avoid memory leak when virCgroupSetCpusetMemoryMigrate fails (rhbz#1198497)
  - qemu: cgroup: Fix memory leak when there's no vCPU pinning (rhbz#1198096)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-54
changelog:
  - util: set MAC address for VF via netlink message to PF+VF# when possible (rhbz#1113474)
  - util: set macvtap physdev online when macvtap is set online (rhbz#1113474)


author: Jiri Denemark <jdenemar@redhat.com> - 0.10.2-54.el6_7.1
changelog:
  - qemu: split out cpuset.mems setting (rhbz#1265970)
  - qemu: leave restricting cpuset.mems after initialization (rhbz#1265970)
  - virNetDev{Replace, Restore}MacAddress: Fix memory leak (rhbz#1266039)
  - util: make virNetDev(Replace|Restore)MacAddress public functions (rhbz#1266039)
  - util: don't use netlink to save/set mac for macvtap+passthrough+802.1Qbh (rhbz#1266039)


author: Caolan McNamara <caolanm@redhat.com> 0.2.8.4-1
changelog:
  - get patches merged upstream
  - drop integrated libwmf-0.2.8.3-warnings.patch
  - drop integrated libwmf-0.2.8.3-noextras.patch
  - drop integrated libwmf-0.2.8.3-rh154813.patch


author: Caolan McNamara <caolanm@redhat.com> 0.2.8.4-16
changelog:
  - I wrote it and still had to check the headers to see if I had
    cut and pasted "and later" into then


author: Ville Skyttä <ville.skytta at iki.fi> - 0.2.8.4-18
changelog:
  - Split libwmflite (WMF parser) into -lite subpackage (#432651).
  - Build with dependency tracking disabled.
  - Convert docs to UTF-8.


author: Daniel Veillard <veillard@redhat.com> 2.6.27-1
changelog:
  - upstream release 2.6.27 see http://xmlsoft.org/news.html
  - very large amount of bug fixes reported upstream


author: Daniel Veillard <veillard@redhat.com> 2.7.0-1.fc10
changelog:
  - upstream release of 2.7.0
  - switch to XML 1.0 5th edition
  - switch to RFC 3986 for URI parsing
  - better entity handling
  - option to remove hardcoded limitations in the parser
  - more testing
  - a new API to allocate entity nodes
  - and lot of fixes and clanups


author: Daniel Veillard <veillard@redhat.com> 2.7.2-1.fc10
changelog:
  - new release 2.7.2
  - Fixes the known problems in 2.7.1
  - increase the set of options when saving documents


author: Daniel Veillard <veillard@redhat.com> - 2.7.3-1
changelog:
  - new release 2.7.3
  - limit default max size of text nodes
  - special parser mode for PHP
  - bug fixes and more compiler checks


author: Daniel Veillard <veillard@redhat.com> - 2.7.4-1
changelog:
  - upstream release 2.7.4
  - symbol versioning of libxml2 shared libs
  - very large number of bug fixes


author: Daniel Veillard <veillard@redhat.com> - 2.7.6-5.el6
changelog:
  - Make sure the parser returns when getting a Stop order CVE-2011-3905
  - Fix an allocation error when copying entities CVE-2011-3919
  - Resolves: rhbz#771910


author: Daniel Veillard <veillard@redhat.com> - 2.7.6-9.el6
changelog:
  - Fix a failure to report xmlreader parsing failures
  - Fix parser local buffers size problems (rhbz#843742)
  - Fix entities local buffers size problems (rhbz#843742)
  - Fix an error in previous commit (rhbz#843742)
  - Do not fetch external parsed entities
  - Impose a reasonable limit on attribute size (rhbz#843742)
  - Impose a reasonable limit on comment size (rhbz#843742)
  - Impose a reasonable limit on PI size (rhbz#843742)
  - Cleanups and new limit APIs for dictionaries (rhbz#843742)
  - Introduce some default parser limits (rhbz#843742)
  - Implement some default limits in the XPath module
  - Fixup limits parser (rhbz#843742)
  - Enforce XML_PARSER_EOF state handling through the parser
  - Avoid quadratic behaviour in some push parsing cases (rhbz#843742)
  - More avoid quadratic behaviour (rhbz#843742)
  - Strengthen behaviour of the push parser in problematic situations (rhbz#843742)
  - More fixups on the push parser behaviour (rhbz#843742)
  - Fix a segfault on XSD validation on pattern error
  - Fix an unimplemented part in RNG value validation


author: Daniel Veillard <veillard@redhat.com> - libxml2-2.7.6-18.el6
changelog:
  - CVE-2014-3660 denial of service via recursive entity expansion (rhbz#1149086)
  - Fix html serialization error and htmlSetMetaEncoding (rhbz#1004513)


author: Daniel Veillard <veillard@redhat.com> - libxml2-2.7.6-19.el6
changelog:
  - Stop parsing on entities boundaries errors
  - Fix missing entities after CVE-2014-3660 fix (rhbz#1149086)


author: Daniel Veillard <veillard@redhat.com> - 2.7.6-20.1
changelog:
  - Fix a series of CVEs (rhbz#1286495)
  - CVE-2015-7941 Cleanup conditional section error handling
  - CVE-2015-8317 Fail parsing early on if encoding conversion failed
  - CVE-2015-7942 Another variation of overflow in Conditional sections
  - CVE-2015-7942 Fix an error in previous Conditional section patch
  - Fix parsing short unclosed comment uninitialized access
  - CVE-2015-7498 Avoid processing entities after encoding conversion failures
  - CVE-2015-7497 Avoid an heap buffer overflow in xmlDictComputeFastQKey
  - CVE-2015-5312 Another entity expansion issue
  - CVE-2015-7499 Add xmlHaltParser() to stop the parser
  - CVE-2015-7499 Detect incoherency on GROW
  - CVE-2015-7500 Fix memory access error due to incorrect entities boundaries
  - CVE-2015-8242 Buffer overead with HTML parser in push mode
  - Libxml violates the zlib interface and crashes


author: Preston Brown <pbrown@redhat.com> 3.5.6-1
changelog:
  - enable LFS support (debian bug #100810)
  - quote filenames for running compress commands or pre/postrotate cmds (#21348)
  - deprecate "errors" directive (see bug #16544 for explanation)
  - update man page
  - configurable compression command by Colm Buckley <colm@tuatha.org>


author: Preston Brown <pbrown@redhat.com> 3.6-1
changelog:
  - patch from Alexander Kourakos <awk@awks.org> to stop the shared
    postrotate/prerotate scripts from running if none of the log(s) need
    rotating.  All log files are now checked for rotation in one batch,
    rather than sequentially.
  - more fixes from Paul Martin <pm@debian.org>


author: Elliot Lee <sopwith@redhat.com> 3.6.2-1
changelog:
  - Fix bug #55809 (include logrotate.status in "files")
  - Fix bug #58328 (incorrect error detection when reading state file)
  - Allow 'G' size specifier from bug #57242


author: Erik Troan <ewt@redhat.com>
changelog:
  - always use compressext for the extension for compressed
    files; before compresscmd and compressext had to agree
  - moved all compression to one code block
  - compression, scripts don't use system() anymore
  - compress and maillast didn't work together properly
  - delaycompress and mailfirst didn't work properly
  - don't use system() for mailing (or uncompressing) logs anymore
  - use "-s" for speciying the subjected of mailed logs


author: Miloslav Trmac <mitr@redhat.com> - 3.7.1-2
changelog:
  - Fix sending mails (#131583)
  - Preserve file attributes when compressing files (#121523, original patch by
    Daniel Himler)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.4-11
changelog:
  - logrotate won't stop if there are some errors in configuration
    or glob failures (#166510, #182062)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.4-12
changelog:
  - fix problem with compress_options_list (#227706)
  - fix spec file to meet Fedora standards (#226104)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.5-2
changelog:
  - fix error hadnling after prerotate, postrotate, firstaction 
    script failure. (http://qa.mandriva.com/show_bug.cgi?id=29979)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.5-4
changelog:
  - use dateext in the default config file (#240292)
  - add options to use shred for deleting files -- adapt patch sent by
    Peter Eckersley <pde@eff.org> (#239934)
  - ignore .cfsaved files by default (#223476)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.6-1
changelog:
  - new upstream version
  - fix #248565 logrotate never rotates /var/log/btmp
  - fix compile warnings
  - tabooext accepts wildcards (related #247816)
  - fix minor errors and update man page (related #250059)
  - fix handling of size directive (related #247410)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.6-2
changelog:
  - fix #427274 - logrotate fails to preserve SELinux file contexts
  - fix #427661 - SELinux stops vsftpd from working correctly


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-10
changelog:
  - fix #604686 - pass currently rotated file as argument to
    postrotate/prerotate script in nosharedscripts mode


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-14
changelog:
  - fix #683622 - add support for ACLs
  - fix #736053 - check for brackets order in config file
  - fix #659705, #659713, #659720 - fixed mistakes in man-page


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-17
changelog:
  - fix #841520 - do not try to change owner of log if it is not needed
  - fix #848131 - fix bad umask value while creating temp file
  - fix #920030 - set SELinux context before compress files creation
  - fix #922169 - remove temp files on error
  - fix #847338 - do not overwrite create directive value by ACL setting
  - fix #847339 - fix race condition between fchmod and acl_set_fd


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-18
changelog:
  - fix #722209 - do not redirect output of logrotate to /dev/null, mark
    logrotate.conf as config
  - fix #1117189 - sort logs according to dateformat when removing the old one
  - fix #625034 - update logrotate.status atomically
  - fix #984965 - fix possible overflow in "create" directive parsing
  - fix #1012485 - use permissions 0700 for cron.daily script


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-19
changelog:
  - fix #1047899 - add support for "maxsize" directive
  - fix #1125769 - add support for "createolddir" directive


author: Jeff Johnson <jbj@redhat.com> 0.15-3687.0
changelog:
  - first build from adapted spec file, only client and libraries for now.
  - internal apr/apr-utils/neon until incompatibilities sort themselves out.
  - avoid libdir issues on x86_64 for the moment.


author: Joe Orton <jorton@redhat.com> 0.22.2-1
changelog:
  - update to 0.22.2; add mod_dav_svn subpackage
  - include Python bindings
  - neon: force use of expat, enable SSL
  - drop check for specific apr version added in -3


author: Jeff Johnson <jbj@redhat.com> 0.22.2-2
changelog:
  - use external neon-0.23.9-2 (i.e. with neon-config), drop internal neon.
  - use db-4.1.25, not db-4.0.14.
  - do "make check" (but ignore failure for now).
  - s390x knows not of httpd >= 2.0.45.


author: Joe Orton <jorton@redhat.com> 1.0.0-2
changelog:
  - add fix for lack of apr_dir_read ordering guarantee (Philip Martin)
  - enable compression in ra_dav by default (Tobias Ringström)


author: Joe Orton <jorton@redhat.com> 1.0.2-2
changelog:
  - add perl MODULE_COMPAT requirement for -perl subpackage
  - move perl man pages into -perl subpackage
  - clean up -perl installation and dependencies (Ville Skyttä, #123045)


author: Joe Orton <jorton@redhat.com> 1.1.3-7
changelog:
  - restore swig bindings support (from upstream via Max Bowsher, #141343)
  - tweak SELinux commentary in default subversion.conf


author: Joe Orton <jorton@redhat.com> 1.1.3-8
changelog:
  - further swig bindings fix (upstream via Max Bowsher, #151798)
  - fix perl File::Path dependency in filter-requires.sh


author: Joe Orton <jorton@redhat.com> 1.2.0-3
changelog:
  - update to 1.2.1
  - fix BuildRequires for ruby and apr-util (#163126)
  - drop static library archives


author: Joe Orton <jorton@redhat.com> 1.2.3-3
changelog:
  - update to 1.2.3
  - update to psvn.el r16070 from Stefan Reichoer
  - merge subversion.conf changes from RHEL4
  - merge filter-requires.sh changes from FC4 updates


author: Joe Orton <jorton@redhat.com> 1.3.2-2
changelog:
  - update to 1.3.2
  - fix Ruby sitelibdir (Garrick Staples, #191611)
  - own /etc/subversion (#189071)
  - update to psvn.el r19857


author: Joe Orton <jorton@redhat.com> 1.4.3-3
changelog:
  - update to 1.4.3 (#228691)
  - remove trailing dot from Summary
  - use current preferred standard BuildRoot
  - add post/postun ldconfig scriptlets for -ruby and -javahl


author: Joe Orton <jorton@redhat.com> 1.4.4-2
changelog:
  - update to 1.4.4
  - add Provides: svn (#245087)
  - fix without-java build (Lennert Buytenhek, #245467)


author: Joe Orton <jorton@redhat.com> 1.4.4-3
changelog:
  - fix build with new glibc open()-as-macro
  - build all swig code in %build, not %install
  - BuildRequire perl(Test::More), perl(ExtUtils::MakeMaker)


author: Joe Orton <jorton@redhat.com> 1.4.4-4
changelog:
  - trim dependencies from .la files
  - detabify spec file
  - test suite disabled to ease stress on builders


author: Joe Orton <jorton@redhat.com> 1.5.6-3
changelog:
  - update to 1.5.6
  - autoload psvn (#238491, Tom Tromey)
  - regenerate swig bindings (#480503)
  - fix build with libtool 2.2 (#469524)


author: Ville Skyttä <ville.skytta@iki.fi> - 1.6.5-3
changelog:
  - Apply svn2cl upstream patch to fix newline issues with libxml2 2.7.4+,
    see http://bugs.debian.org/546990 for details.


author: Ville Skyttä <ville.skytta@iki.fi> - 1.6.6-5
changelog:
  - Include svn2cl and its man page only in the -svn2cl subpackage (#558598).
  - Do not include bash completion in docs, it's installed.


author: Joe Orton <jorton@redhat.com> - 1.6.11-4
changelog:
  - add security fixes for CVE-2011-1752, CVE-2011-1783, CVE-2011-1921 (#709221)
  - add security fix for CVE-2011-0715 (#681174)
  - add security fixes for CVE-2010-4644, CVE-2010-4539 (#672679)


author: Joe Orton <jorton@redhat.com> - 1.6.11-5
changelog:
  - add init script for svnserve (#720790, #711904)
  - fix segfault with "AuthzForceUsernameCase lower" (#751321)
  - fix parent directory access with merges (#749494)


author: Jos Vos <jos@xos.nl>
changelog:
  - Version 3.22.27 release XOS.1 for LinuX/OS 1.7.0
  - Initial version.
  - Some ideas borrowed from Red Hat Powertools 6.1, although this spec
    file is a full rewrite from scratch.


author: Jos Vos <jos@xos.nl>
changelog:
  - Version 3.22.27 release XOS.2 for LinuX/OS 1.7.1
  - Add post(un)install scripts for updating ld.so.conf (client subpackage).


author: Jos Vos <jos@xos.nl>
changelog:
  - Version 3.22.32 release XOS.1 for LinuX/OS 1.8.0
  - Upgrade from version 3.22.27 to 3.22.32.
  - Do "make install" instead of "make install-strip", because "install -s"
    now appears to fail on various scripts.  Afterwards, strip manually.
  - Reorganize subpackages, according to common Red Hat packages: the client
    program and shared library become the base package and the server and
    some accompanying files are now in a separate server package.  The
    server package implicitly requires the base package (shared library),
    but we have added a manual require tag anyway (because of the shared
    config file, and more).
  - Rename the mysql-benchmark subpackage to mysql-bench.


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - update to 3.23.20
  - use %configure, %makeinstall, %{_tmppath}, %{_mandir},
    %{_infodir}, /etc/init.d
  - remove the bench package
  - change some of the descriptions a little bit
  - fix the init script
  - some compile fixes
  - specify mysql user
  - use mysql uid 27 (postgresql is 26)
  - don't build on ia64


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - 3.23.21
  - remove file from /etc/sysconfig
  - Fix initscript a bit - initialization of databases doesn't
    work yet
  - specify the correct licenses
  - include a /etc/my.conf (empty, FTTB)
  - add conditional restart to spec file


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - try the new compiler again
  - build the SQL daemon statically
  - add compile time support for complex charsets
  - enable assembler
  - more cleanups in initscript


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - don't build the SQL daemon statically (glibc problems)
  - fix the logrotate script - only flush log if mysql
    is running
  - change the reloading procedure 
  - remove icon - glint is obsolete a long time ago


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - don't run ldconfig -n, it doesn't update ld.so.cache
    (#16034)
  - include some missing binaries
  - use safe_mysqld to start the server (request from
    mysql developers)


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - rename config file to /etc/my.cnf, which is what
    mysqld wants... doh. (#17432)
  - include a changed safe_mysqld, so the pid file option
    works. 
  - make mysql dir world readable to they can access the 
    mysql socket. (#17432)
  - 3.23.24


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - 3.23.26, which among other fixes now uses mkstemp()
    instead of tempnam().
  - revert changes made yesterday, the problem is now
    isolated


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - check for negative niceness values, and negate it
    if present (#17899)
  - redefine optflags on IA32 FTTB


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - bzipped source
  - changed from 85 to 78 in startup, so it starts before
    apache (which can use modules requiring mysql)


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - 3.23.30
  - do an explicit chmod on /var/lib/mysql in post, to avoid 
    any problems with broken permissons. There is a report
    of rm not changing this on its own (#22989)


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - add the log file to the rpm database, and make it 0640
    (#24116)
  - as above in logrotate script
  - changes to the init sequence - put most of the data
    in /etc/my.cnf instead of hardcoding in the init script
  - use /var/run/mysqld/mysqld.pid instead of 
    /var/run/mysqld/pid
  - use standard safe_mysqld
  - shut down cleaner


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - gettextize
  - move the items in Requires(post): to Requires: in preparation
    for an errata for 7.0 when 3.23.31 is released
  - 3.23.31


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - Make it obsolete our 6.2 PowerTools packages
  - 3.23.36 bugfix release - fixes some security issues
    which didn't apply to our standard configuration
  - Make "make test" part of the build process, except on IA64
    (it fails there)


author: Trond Eivind Glomsrd <teg@redhat.com>
changelog:
  - Reenable test, but don't run them for s390, s390x or ia64
  - Make /etc/my.cnf config(noplace). Same for /etc/logrotate.d/mysqld


author: Trond Eivind Glomsrd <teg@redhat.com> 3.23.41-1
changelog:
  - 3.23.41 bugfix release
  - disable innodb, to avoid the broken updates
  - Use "mysqladmin flush_logs" instead of kill -HUP in logrotate 
    script (#51711)


author: Trond Eivind Glomsrd <teg@redhat.com> 3.23.46-1
changelog:
  - 3.23.46
  - use -fno-rtti and -fno-exceptions, and set CXX to increase stability. 
    Recommended by mysql developers.


author: Trond Eivind Glomsrd <teg@redhat.com> 3.23.47-4
changelog:
  - Use kill, not mysqladmin, to flush logs and shut down. Thus, 
    an admin password can be set with no problems.
  - Remove reload from init script


author: Trond Eivind Glomsrd <teg@redhat.com> 3.23.49-3
changelog:
  - Add the various .cnf examples as doc files to mysql-server (#60349)
  - Don't include manual.ps, it's just 200 bytes with a URL inside (#60349)
  - Don't include random files in /usr/share/mysql (#60349)
  - langify (#60349)


author: Trond Eivind Glomsrd <teg@redhat.com> 3.23.52-2
changelog:
  - Add --enable-local-infile to configure - a new option
    which doesn't default to the old behaviour (#72885)


author: Patrick Macdonald <patrickm@redhat.com> 3.23.57-1
changelog:
  - revert to prior version of MySQL due to license incompatibilities 
    with packages that link against the client.  The MySQL folks are
    looking into the issue.


author: Tom Lane <tgl@redhat.com> 3.23.58-8
changelog:
  - repair logfile attributes in %files, per bug #102190
  - repair quoting problem in mysqlhotcopy, per bug #112693
  - repair missing flush in mysql_setpermission, per bug #113960
  - repair broken error message printf, per bug #115165
  - delete mysql user during uninstall, per bug #117017
  - rebuilt


author: Tom Lane <tgl@redhat.com> 3.23.58-11
changelog:
  - fix low-priority security issues CAN-2004-0388, CAN-2004-0381, CAN-2004-0457
    (bugs #119442, 125991, 130347, 130348)
  - fix bug with dropping databases under recent kernels (bug #124352)


author: Tom Lane <tgl@redhat.com> 3.23.58-12
changelog:
  - fix multilib problem with mysqlbug and mysql_config
  - adjust chkconfig priority per bug #128852
  - remove bogus quoting per bug #129409 (MySQL 4.0 has done likewise)
  - add sleep to mysql.init restart(); may or may not fix bug #133993


author: Tom Lane <tgl@redhat.com> 3.23.58-13
changelog:
  - fix security issues CAN-2004-0835, CAN-2004-0836, CAN-2004-0837
    (bugs #135372, 135375, 135387)
  - fix privilege escalation on GRANT ALL ON `Foo\_Bar` (CAN-2004-0957)


author: Tom Lane <tgl@redhat.com> 4.1.7-4
changelog:
  - Turn off old_passwords in default /etc/my.cnf file, for better compatibility
    with mysql 3.x clients (per suggestion from Joe Orton).


author: Tom Lane <tgl@redhat.com> 4.1.7-6
changelog:
  - Fix init script to not need a valid username for startup check (bz#142328)
  - Fix init script to honor settings appearing in /etc/my.cnf (bz#76051)
  - Enable SSL (bz#142032)


author: Tom Lane <tgl@redhat.com> 4.1.10-2
changelog:
  - Need -fno-strict-aliasing in at least one place, probably more.
  - Work around some C spec violations in mysql.


author: Tom Lane <tgl@redhat.com> 4.1.10a-1
changelog:
  - Update to MySQL 4.1.10a to fix security vulnerabilities (bz#150868,
    for CAN-2005-0711, and bz#150871 for CAN-2005-0709, CAN-2005-0710).


author: Tom Lane <tgl@redhat.com> 4.1.11-1
changelog:
  - Update to MySQL 4.1.11 to fix bz#152911 as well as other issues
  - Move perl-DBI, perl-DBD-MySQL dependencies to server package (bz#154123)
  - Override configure thread library test to suppress HAVE_LINUXTHREADS check
  - Fix BDB failure on s390x (bz#143537)
  - At last we can enable "make test" on all arches


author: Tom Lane <tgl@redhat.com> 4.1.11-2
changelog:
  - Avoid dependency on <asm/atomic.h>, cause it won't build anymore on ia64.
    This is probably a cleaner solution for bz#143537, too.


author: Tom Lane <tgl@redhat.com> 4.1.11-3
changelog:
  - Enable openssl tests during build, per bz#155850
  - Might as well turn on --disable-dependency-tracking


author: Tom Lane <tgl@redhat.com> 4.1.12-1
changelog:
  - Update to MySQL 4.1.12 (includes a fix for bz#158688, bz#158689)
  - Extend mysql-test-ssl.patch to solve rpl_openssl test failure (bz#155850)
  - Update mysql-lock-ssl.patch to match the upstream committed version
  - Add --with-isam to re-enable the old ISAM table type, per bz#159262
  - Add dependency on openssl-devel per bz#159569
  - Remove manual.txt, as upstream decided not to ship it anymore;
    it was redundant with the mysql.info file anyway.


author: Tom Lane <tgl@redhat.com> 4.1.12-2
changelog:
  - Fix buffer overflow newly exposed in isam code; it's the same issue
    previously found in myisam, and not very exciting, but I'm tired of
    seeing build warnings.


author: Tom Lane <tgl@redhat.com> 5.0.16-1
changelog:
  - Update to MySQL 5.0.16
  - Add EXCEPTIONS-CLIENT license info to the shipped documentation
  - Make my_config.h architecture-independent for multilib installs;
    put the original my_config.h into my_config_$ARCH.h
  - Add -fwrapv to CFLAGS so that gcc 4.1 doesn't break it


author: Tom Lane <tgl@redhat.com> 5.0.18-4
changelog:
  - Modify multilib header hack to not break non-RH arches, per bug #181335
  - Remove logrotate script, per bug #180639.
  - Add a new mysql-test RPM to carry the regression test files;
    hack up test scripts as needed to make them run in /usr/share/mysql-test.


author: Tom Lane <tgl@redhat.com> 5.0.22-1
changelog:
  - Update to MySQL 5.0.22 (fixes CVE-2006-2753)
  - Install temporary workaround for gcc bug on s390x (bz #193912)


author: Tom Lane <tgl@redhat.com> 5.0.22-2
changelog:
  - Work around brew's tendency not to clean up failed builds completely,
    by adding code in mysql-testing.patch to kill leftover mysql daemons.


author: Tom Lane <tgl@redhat.com> 5.0.27-1
changelog:
  - Update to MySQL 5.0.27 (see CVE-2006-4031, CVE-2006-4226, CVE-2006-4227)
  Resolves: #202247, #202675, #203427, #203428, #203432, #203434, #208641
  - Fix init script to return status 1 on server start timeout
  Resolves: #203910
  - Move mysqldumpslow from base package to mysql-server
  Resolves: #193559
  - Adjust link options for BDB module
  Resolves: #199368


author: Tom Lane <tgl@redhat.com> 5.0.33-1
changelog:
  - Update to MySQL 5.0.33
  - Install band-aid fix for "view" regression test designed to fail after 2006
  - Don't chmod -R the entire database directory tree on every startup
  Related: #221085
  - Fix unsafe use of install-info
  Resolves: #223713
  - Cope with new automake in F7
  Resolves: #224171


author: Tom Lane <tgl@redhat.com> 5.0.37-1
changelog:
  - Update to MySQL 5.0.37
  Resolves: #231838
  - Put client library into a separate mysql-libs RPM to reduce dependencies
  Resolves: #205630


author: Tom Lane <tgl@redhat.com> 5.0.37-2
changelog:
  - Use a less hacky method of getting default values in initscript
  Related: #233771, #194596
  - Improve packaging of mysql-libs per suggestions from Remi Collet
  Resolves: #233731
  - Update default /etc/my.cnf ([mysql.server] has been bogus for a long time)


author: Tom Lane <tgl@redhat.com> 5.0.45-1
changelog:
  - Update to MySQL 5.0.45
  Resolves: #246535
  - Move mysql_config's man page to base package
  Resolves: #245770
  - move my_print_defaults to base RPM, for consistency with Stacks packaging
  - mysql user is no longer deleted at RPM uninstall
  Resolves: #241912


author: Tom Lane <tgl@redhat.com> 5.0.45-2
changelog:
  - Update License tag to match code.
  - Work around recent Fedora change that makes "open" a macro name.


author: Tom Lane <tgl@redhat.com> 5.0.45-4
changelog:
  - Seems we need explicit BuildRequires on gawk and procps now
  - Rebuild to fix Fedora toolchain issues


author: Tom Lane <tgl@redhat.com> 5.0.45-7
changelog:
  - Unbelievable ... upstream still thinks that it's a good idea to have a
    regression test that is guaranteed to begin failing come January 1.
  - ... and it seems we need to raise STACK_MIN_SIZE again too.


author: Tom Lane <tgl@redhat.com> 5.0.45-9
changelog:
  - Fix the stack overflow problem encountered in January.  It seems the real
  issue is that the buildfarm machines were moved to RHEL5, which uses 64K not
  4K pages on PPC, and because RHEL5 takes the guard area out of the requested
  thread stack size we no longer had enough headroom.
  Related: #435337


author: Dennis Gilmore <dennis@ausil.us> 5.0.45-10
changelog:
  - add sparc64 to 64 bit arches for test suite checking
  - add sparc, sparcv9 and sparc64 to multilib handling


author: Tom Lane <tgl@redhat.com> 5.0.45-11
changelog:
  - Fix mysql-stack-guard patch to work correctly on IA64
  - Fix mysql.init to wait correctly when socket is not in default place
  Related: #435494


author: Tom Lane <tgl@redhat.com> 5.0.51a-2
changelog:
  - Enable ndbcluster support
  Resolves: #163758
  - Suppress odd crash messages during package build, caused by trying to
    build dbug manual (which we don't install anyway) with dbug disabled
  Resolves: #437053
  - Improve mysql.init to pass configured datadir to mysql_install_db,
    and to force user=mysql for both mysql_install_db and mysqld_safe.
  Related: #450178


author: Tom Lane <tgl@redhat.com> 5.0.67-1
changelog:
  - Update to mysql version 5.0.67
  - Move mysql_config's man page to base package, again (apparently I synced
    that change the wrong way while importing specfile changes for ndbcluster)


author: Tom Lane <tgl@redhat.com> 5.0.67-2
changelog:
  - Build the "embedded server" library, and package it in a new sub-RPM
    mysql-embedded, along with mysql-embedded-devel for devel support files.
  Resolves: #149829


author: Tom Lane <tgl@redhat.com> 5.1.30-1
changelog:
  - Update to MySQL 5.1.30.  Note that this includes an ABI break for
    libmysqlclient (it's now got .so major version 16).
  - This also updates mysql for new openssl build


author: Tom Lane <tgl@redhat.com> 5.1.30-2
changelog:
  - hm, apparently --with-innodb and --with-ndbcluster are still needed
    even though no longer documented ...


author: Tom Lane <tgl@redhat.com> 5.1.33-1
changelog:
  - Update to MySQL 5.1.33.
  - Disable use of pthread_setschedparam; doesn't work the way code expects.
  Related: #477624


author: Tom Lane <tgl@redhat.com> 5.1.34-1
changelog:
  - Update to MySQL 5.1.34, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-34.html
  - Increase startup timeout per bug #472222


author: Tom Lane <tgl@redhat.com> 5.1.35-1
changelog:
  - Update to MySQL 5.1.35, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-35.html
  - Ensure that /var/lib/mysql is created with the right SELinux context
  Resolves: #502966


author: Tom Lane <tgl@redhat.com> 5.1.36-1
changelog:
  - Update to MySQL 5.1.36, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-36.html


author: Tom Lane <tgl@redhat.com> 5.1.37-1
changelog:
  - Update to MySQL 5.1.37, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-37.html


author: Tom Lane <tgl@redhat.com> 5.1.37-2
changelog:
  - Add a couple of patches to improve the probability of the regression tests
    completing in koji builds


author: Tom Lane <tgl@redhat.com> 5.1.37-4
changelog:
  - Remove one misguided patch; turns out I was chasing a glibc bug
  - Temporarily disable "main.mysql" test; there's something broken there too,
    but we need to get mysql built in rawhide for dependency reasons


author: Tom Lane <tgl@redhat.com> 5.1.37-5
changelog:
  - Work around unportable assumptions about stpcpy(); re-enable main.mysql test
  - Clean up some obsolete parameters to the configure script


author: Tom Lane <tgl@redhat.com> 5.1.39-1
changelog:
  - Update to MySQL 5.1.39, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-39.html


author: Tom Lane <tgl@redhat.com> 5.1.39-3
changelog:
  - Work around two different compiler bugs on sparc, one by backing off
    optimization from -O2 to -O1, and the other with a klugy patch
  Related: #529298, #529299
  - Clean up bogosity in multilib stub header support: ia64 should not be
    listed (it's not multilib), sparc and sparc64 should be


author: Tom Lane <tgl@redhat.com> 5.1.40-1
changelog:
  - Update to MySQL 5.1.40, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-40.html
  - Do not force the --log-error setting in mysqld init script
  Resolves: #533736


author: Tom Lane <tgl@redhat.com> 5.1.41-1
changelog:
  - Update to MySQL 5.1.41, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-41.html
    including fixes for CVE-2009-4019
  Resolves: #549327
  - Don't set old_passwords=1; we aren't being bug-compatible with 3.23 anymore
  Resolves: #540735


author: Tom Lane <tgl@redhat.com> 5.1.42-4
changelog:
  - Sync with current Fedora build, including:
  - Update to MySQL 5.1.42, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-42.html
  - Disable symbolic links by default in /etc/my.cnf
  Resolves: #553653
  - Remove static libraries (.a files) from package, per packaging guidelines
  - Change %define to %global, per packaging guidelines
  - Disable building the innodb plugin; it tickles assorted gcc bugs and
    doesn't seem entirely ready for prime time anyway.
  Resolves: #553632
  - Start mysqld_safe with --basedir=/usr, to avoid unwanted SELinux messages
    (see 547485)
  - Stop waiting during "service mysqld start" if mysqld_safe exits
  Resolves: #544095


author: Tom Lane <tgl@redhat.com> 5.1.42-7
changelog:
  - Add backported patch for CVE-2008-7247 (upstream bug 39277)
  Resolves: #549329
  - Use non-expired certificates for SSL testing (upstream bug 50702)


author: Tom Lane <tgl@redhat.com> 5.1.43-2
changelog:
  - Update to MySQL 5.1.43, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-43.html
  Resolves: #565554
  - Remove mysql-cluster, which is no longer supported by upstream in this
    source distribution.  If we want it we'll need a separate SRPM for it.
  Resolves: #565210


author: Tom Lane <tgl@redhat.com> 5.1.44-2
changelog:
  - Update to MySQL 5.1.44, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-44.html
  Resolves: #565554
  - Remove mysql.info, which is not freely redistributable
  Related: #560181
  - Revert broken upstream fix for their bug 45058
  Related: #566547
  - Bring init script into some modicum of compliance with Fedora/LSB standards
  Resolves: #557711
  Resolves: #562749


author: Tom Lane <tgl@redhat.com> 5.1.47-1
changelog:
  - Update to MySQL 5.1.47, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-47.html
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-46.html
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-45.html
    including fixes for CVE-2010-1621, CVE-2010-1626,
    CVE-2010-1848, CVE-2010-1849, CVE-2010-1850
  Resolves: #590598
  - Create mysql group explicitly in pre-server script, to ensure correct GID


author: Tom Lane <tgl@redhat.com> 5.1.47-2
changelog:
  - Add back "partition" storage engine
  Resolves: #598585
  - Fix broken "federated" storage engine plugin
  Resolves: #587170
  - Read all certificates in SSL certificate files, to support chained certs
  Resolves: #598656


author: Tom Lane <tgl@redhat.com> 5.1.47-3
changelog:
  - Add -p "$mypidfile" to initscript's status call to improve corner cases.
    (Note: can't be fixed in Fedora until 595597 is fixed there.)
  Resolves: #596008


author: Tom Lane <tgl@redhat.com> 5.1.47-4
changelog:
  - Add backported patch for CVE-2010-2008 (upstream bug 53804)
  Resolves: #614215
  - Add BuildRequires perl(Time::HiRes) ... seems to no longer be installed
    by just pulling in perl.


author: Tom Lane <tgl@redhat.com> 5.1.52-1
changelog:
  - Update to MySQL 5.1.52, for various fixes described at
    http://dev.mysql.com/doc/refman/5.1/en/news-5-1-52.html
    including numerous small security issues
  Resolves: #652554
  - Sync with current Fedora package; this includes:
  - Duplicate COPYING and EXCEPTIONS-CLIENT in -libs and -embedded subpackages,
    to ensure they are available when any subset of mysql RPMs are installed,
    per revised packaging guidelines
  - Allow init script's STARTTIMEOUT/STOPTIMEOUT to be overridden from sysconfig


author: Tom Lane <tgl@redhat.com> 5.1.61-1
changelog:
  - Update to 5.1.61, for assorted upstream bugfixes including
    numerous CVEs announced in January 2012
  Resolves: #787192


author: Tom Lane <tgl@redhat.com> 5.1.66-1
changelog:
  - Update to 5.1.66, for assorted upstream bugfixes including
    CVEs announced in July and October 2012
  Resolves: #871814


author: Tom Lane <tgl@redhat.com> 5.1.67-1
changelog:
  - Update to 5.1.67, for assorted upstream bugfixes including
    CVEs announced in January 2013
  Resolves: #901381


author: Tom Lane <tgl@redhat.com> 5.1.69-1
changelog:
  - Update to 5.1.69, for assorted upstream bugfixes including
    CVEs announced in April 2013
  Resolves: #953085


author: Honza Horak <hhorak@redhat.com> 5.1.70-1
changelog:
  - Update to MySQL 5.1.70, for various fixes described at
    http://dev.mysql.com/doc/relnotes/mysql/5.1/en/news-5-1-70.html
    Resolves: #990796, #842052
  - Fix mysqldump failure against MySQL 5.0.x server due missing tables
    Resolves: #877557
  - Add logrotate script
    Resolves: #904061
  - Fix init script to not show failed on start even when server started
    Resolves: #884651


author: Honza Horak <hhorak@redhat.com> 5.1.71-1
changelog:
  - Update to MySQL 5.1.71, for various fixes described at
    http://dev.mysql.com/doc/relnotes/mysql/5.1/en/news-5-1-71.html
    Resolves: #990796


author: Jakub Dorňák <jdornak@redhat.com> - 5.1.73-1
changelog:
  - Update to MySQL 5.1.73, for various fixes described at
    http://dev.mysql.com/doc/relnotes/mysql/5.1/en/news-5-1-73.html
    (CVE-2014-0412, CVE-2014-0437, CVE-2013-5908, CVE-2014-0393,
    CVE-2014-0386, CVE-2014-0401, CVE-2014-0402)
    Resolves: #1055882


author: Honza Horak <hhorak@redhat.com> 5.1.73-2
changelog:
  - Make mysqld init script more robust and ignore existing but
    non-being-used unix socket file
    Resolves: #1037650


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - tkmib doco had #!/usr/bin/perl55
  - include snmpcheck and tkmib again (still needs some CPAN module, however).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - don't depend on /etc/init.d so that package will work with 6.2.
  - perl path fiddles no longer needed.
  - rely on brp-compress frpm rpm to compress man pages.
  - patch from ucd-snmp CVS (Wes Hardaker).
  - configure.in needs to check for rpm libraries correctly (#23033).
  - add simple logrotate script (#21399).
  - add options to create pidfile and log with syslog with addresses (#23476).


author: Matt Wilson <msw@redhat.com>
changelog:
  - configure with --enable-reentrant and added "smux" and "agentx" to
    --with-mib-modules= argument (#29626)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Updated to 4.2.1. Removed 2 obsolete patches (fromcvs and #18153)
  - Include /usr/share/snmp/snmpconf in %files


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Enabled IPv6 support (RFE #47764)
  - Hopefully final fix of snmpwalk problem (#42153). Thanks to Douglas Warzecha
    for the patch and Matt Domsch for reporting the problem.


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Removed tkmib from the package once again as we don't ship the Tk.pm CPAN
    perl module required to run it (#49363)
  - Added missing Provides for the .so.0 libraries as rpm doesn't seem to find
    those during the build anymore (it used to) (#46388)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed a couple of security issues:
    o /tmp race and setgroups() privilege problem
    o Various buffer overflow and format string issues.
    o One signedness problem in ASN handling.
  - Fixed an important RFE to support bcm5820 cards. (#51125)


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Final bcm5820 fix. Last one was broken.
  - Fixed bugzilla bug (#51960) where the binaries contained rpath references.


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed a server segfault for snmpset operation (#53640). Thanks to Josh Giles
    and Wes Hardaker for the patch.


author: Phil Knirsch <phil@redhat.de> 4.2.3-1
changelog:
  - Update to 4.2.3 final.
  - Fixed libtool/rpath buildroot pollution problem.
  - Fixed library naming problem.


author: Phil Knirsch <pknirsch@redhat.com> 4.2.3-4
changelog:
  - Added the snmptrapd init script as per request (#49205)
  - Fixed the again broken rpm query stuff (#57444)
  - Removed all old and none-used db related stuff (libs and header checks/files)


author: Phil Knirsch <pknirsch@redhat.com> 5.0.1-5
changelog:
  - Added --enable-ucd-snmp-compatibility for compatibility with older version
    and fixed installation thereof.
  - Got rid of the perl(Tk) dependancy by removing snmpcheck.
  - Include /usr/include/ucd-snmp in the filelist.
  - Fixed a problem with the ucd-snmp/version.h file.


author: Phil Knirsch <pknirsch@redhat.com> 5.0.8-2
changelog:
  - Hack to make it build on 64bit platforms with /usr/lib64 correctly.
  - Fixed bug #85071 (leak of open descriptors for ipv6).


author: Phil Knirsch <pknirsch@redhat.com> 5.0.9-1
changelog:
  - Updated to latest upstream version net-snmp-5.0.9
  - Added patch to fix net-snmp-perl problems (#105842).


author: Phil Knirsch <pknirsch@redhat.com> 5.1-1
changelog:
  - Updated to latest net-snmp-5.1 upstream version.
  - Tons of specfile and patch cleanup.
  - Cleaned up perl stuff (mib2c etc, see #107707).
  - Added lm_sensors support patch for x86 archs from Kaj J. Niemi (#107618).
  - Added support for custom mib paths and mibs to snmptrapd initscript (#102762)


author: Phil Knirsch <pknirsch@redhat.com> 5.1-2
changelog:
  - Included BuildPrereq on lm_sensors-devel on x86 archs (#110616).
  - Fixed deprecated initscript options (#110618).


author: Phil Knirsch <pknirsch@redhat.com> 5.1-3
changelog:
  - Removed snmpcheck again, needs perl(Tk) which we don't ship (#111194).
  - Fixed getopt definition in include file (#111209).
  - Included Kaj J. Niemi's patch for broken perl module (#111319).
  - Included Kaj J. Niemi's patch for broken async getnext perl call (#111479).
  - Included Kaj J. Niemi's patch for broken hr_storage (#111502).


author: Phil Knirsch <pknirsch@redhat.com> 5.1-9
changelog:
  - Reverted removal of _includir redefiniton due to php-snmp dependancy.
  - Remove SO_BSDCOMPAT setsockopt() call, deprecated.


author: Phil Knirsch <pknirsch@redhat.com> 5.1-12
changelog:
  - Hacked an ugly perl hack to get rid of perl RPATH problems.
  - Fixed 64bit patch and applied it. ;-)


author: Phil Knirsch <pknirsch@redhat.com> 5.1.1-2
changelog:
  - Added Kaj J. Niemi that fixes ipAdEntIfIndex problem (#119106)
  - Added Kaj J. Niemi to shut up memshared message for 2.6 kernel (#119203)


author: Radek Vokal <rvokal@redhat.com> 5.1.2-4
changelog:
  - New prereq for net-snmp-devel
  - lelf check removed from configure.in (#128748)
  - fixed snmpd coredump when sent SIGHUP (#127314)


author: Phil Knirsch <pknirsch@redhat.com> 5.1.2-9
changelog:
  - Droped obsolete lm-sensors patch and enabled lmSensors module
  - Marked several patches to be removed for 5.1.3


author: Radek Vokal <rvokal@redhat.com> 5.1.2-12
changelog:
  - snmpd crash with 'interfaces' directives in snmpd.conf fixed #139010
  - rather dirty patch fixing conf directory for net-snmp-config


author: Radek Vokal <rvokal@redhat.com> - 5.1.2-3
changelog:
  - patch from CVS - kill extra carriage return (#144917)
  - removed patch for interface indexing - doesn't show virtual interfaces


author: Radek Vokal <rvokal@redhat.com> - 5.2.1-5
changelog:
  - 64bit needed some changes, was causing timeouts on 64bit archs!? 
  - affects bugs #125432 and #132058


author: Radek Vokal <rvokal@redhat.com> - 5.2.1-12
changelog:
  - session free fixed, agentx modules build fine (#157851)
  - fixed dependency for net-snmp libs (#156932)


author: Radek Vokal <rvokal@redhat.com> - 5.2.2-0.rc6.1
changelog:
  - update to rc6, snmpnetstat changes due to license problems
  - persistent files in directory defined by snmp.conf persistentDir are 
    loaded at startup


author: Radek Vokal <rvokal@redhat.com> - 5.2.2-4
changelog:
  - check for header files in configure
  - patch for SNMPv3 traps / session user creation (net-snmp bz#1374087)


author: Radek Vokal <rvokal@redhat.com> 5.3-2
changelog:
  -  Security fix. Bug granting write access to read-only users 
     or communities which were configured  using the "rocommunity" 
     or "rouser" snmpd.conf tokens fixed


author: Radek Vokál <rvokal@redhat.com> 5.3-7
changelog:
  - fix parsing of /proc/diskstats
  - fix disman monitor crash
  - fix perl vendor name
  - fix OID lookup fail


author: Radek Vokal <rvokal@redhat.com> 5.3.1.pre2-1
changelog:
  - update to 5.3.1.pre2
  - fix multilib issues (#192736)
    On system with /usr/lib64 use net-snmp-config64 and net-snmp-config64.h


author: Radek Vokal <rvokal@redhat.com> 5.3.1.0-5
changelog:
  - SMUX support is still needed .. will disappear later!
  - static libs should be in devel not libs (#203571)
  - fix lm_sensors issues


author: Radek Vokál <rvokal@redhat.com> - 1:5.4-13
changelog:
  - fix overly verbose log message (#221911)
  - few minor tweaks for review - still not perfect
  - fix linking with lcrypto (#231805)


author: Jan Safranek <jsafranek@redhat.com> 5.4-14
changelog:
  - fix snmptrapd hostname logging (#238587)
  - fix udpEndpointProcess remote IP address (#236551)
  - fix -M option of net-snmp-utils (#244784)
  - default snmptrapd.conf added (#243536)
  - fix crash when multiple exec statements have the same name
    (#243536)
  - fix ugly error message when more interfaces share
    one IP address (#209861)


author: Jan Safranek <jsafranek@redhat.com> 5.4-16
changelog:
  - supported lm_sensors on ppc64 (#249255)
  - snmpconf generates config files with proper selinux context
    (#247462)
  - fix leak  in udp transport (#247771)
  - add alpha to supported archs in net-snmp-config (#246825)
  - fix hrSWInst (#250237)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-3
changelog:
  - include these tables: ip-mib/ipv4InterfaceTable
    ip-mib/ipv6InterfaceTable, ip-mib/ipAddressPrefixTable
  - fix Requires of net-snmp-devel to include lmsensors-devel on supported
    architectures


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-5
changelog:
  - move mib2c-update from net-snmp-utils to net-snmp-perl, where
    mib2c is located
  - add tkmib to net-snmp-gui package (#167933)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-6
changelog:
  - add support of lm_sensors v3
  - added procps to build dependencies (#380321)
  - removed beecrypt from dependencies
  - fixed crash on reading xen interfaces (#386611)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-9
changelog:
  - introduce /etc/sysconfig/snmpd. Use it to specify snmpd command line options.
    /etc/snmp/snmpd.options is not used anymore (#431391)


author: Jan Safranek <jsafranek@redhat.com> 5.4.1-15
changelog:
  - explicitly require lm_sensor > 3 for build (#442718)
  - create multilib net-snmp-config on multilib architectures only


author: Jan Safranek <jsafranek@redhat.com> 5.4.2-2
changelog:
  - redistribute the perl scripts to the net-snmp package,
    net-snmp-utils doesn't depend on perl now (#462484)


author: Jan Safranek <jsafranek@redhat.com> 5.4.2.1-1
changelog:
  - explicitly require the right version and release of net-snmp and
    net-snmp-libs
  - update to net-snmp-5.4.2.1 to fix CVE-2008-4309


author: Jan Safranek <jsafranek@redhat.com> 5.4.2.1-12
changelog:
  - make the default configuration less noisy, i.e. do not print "Connection from
    UDP:" and "Received SNMP packet(s) from UDP:" messages on each connection.
    (#509055)


author: Jan Safranek <jsafranek@redhat.com> 5.4.2.1-13
changelog:
  - package cleanup, remove unnecessary patches
  - move local state file from /var/net-snmp/ to /var/lib/net-snmp


author: Jan Safranek <jsafrane@redhat.com> 1:5.5-2
changelog:
  - introduce /etc/sysconfig/snmptrapd. Use it to specify snmptrapd command
    line options.  /etc/snmp/snmptrapd.options is not used anymore (#540799)
  - build-in ipAddressPrefixTable, ipDefaultRouterTable, ipv6ScopeZoneIndexTable,
    ipIfStatsTable, SCTP-MIB, RMON-MIB and Etherlike-MIBs
  - remove ucd5820stat helper script, it depends on get5820stats, which is not
    available in Fedora
  - move sample services ipf-mod.pl to documentation
  - remove logrotate config, snmpd logs into syslog


author: Jan Safranek <jsafrane@redhat.com> 1:5.5-3
changelog:
  - prepare the .spec file for review
  - run automatic regression suite after the compilation of the package
    to check for obvious regressions
  - remove unnecessary package dependencies


author: Jan Safranek <jsafrane@redhat.com> 1:5.5-4
changelog:
  - fix udpTable indexes on big-endian systems (#543352)
  - fix snmptrapd init script to survive with empty /etc/sysconfig/snmptrapd
  - lower the default log level of snmpd to get rid of the debug messages


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-7
changelog:
  - fix invalid access to memory in tcpListenerTable (#551030)
  - fix crash with interfaces without broadcast addresses (like OpenVPN's tun0)
    (#549390)
  - fix responding to broadcast SNMP requests (#549390)
  - port patches from RHEL-5 to avoid regressions


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-14
changelog:
  - store temporary files in /var/run/net-snmp instead of /tmp (SELinux does
    not allow writing /tmp) (#560081)
  - fix filedescriptor leak in RMON-MIB and Etherlike-MIB (#562108)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-15
changelog:
  - remove net-snmp-gui subpackage, perl-Tk is being removed from
    distro (#568786)
  - fix IF-MIB::ifSpeed of inactive interfaces (#561884)
  - correct the package license


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-19
changelog:
  - fixed exit code of snmp utilities when wrong argument to '-A' option
    is specified (#574061)
  - fixed BER parsing of incoming packets - siletnly discard the invalid ones
    according to RFC (#568651)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-21
changelog:
  - fixed hrFSTable and hrStorageTable to provide persistent table indexes
    according to RFS 2790 (#595325)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-22
changelog:
  - fixed value of ipIfStatsTable.Ip6ReasmReqds (#597265)
  - added missing include files from util_funcs directory (#604636)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-23
changelog:
  - fixed segfault when parsing snmpd.conf with disman entries (#607080)
  - fixed value of IP-MIB::ipv6InterfaceForwarding (#607074)
  - fixed output of snmptranslate tool when displaying ranges of UNSIGNED
    type (#606874)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-27.1
changelog:
  - fixed truncation of sysObjectID (#641113)
  - fixed assertions in calculating of statistics in IF-MIB (#621664)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-28
changelog:
  - fixed recompilation of the package on machine without IPv6 (#657835)
  - fixed SMUX getting stuck on big-endian platforms (#665053)
  - fixed OID comparsion in snmpwalk, now the output does not include
    objects outside requested subtree (#636890)
  - fixed IPv4 address creation in ipAddressTable (#616764)
  - added IPv6 address creation to ipAddressTable (#616336)
  - fixed value of ipAddressPrefixAutonomousFlag OID (#625262)
  - fixed ipv6IfTable - new interfaces were not added there (#627564)
  - extended BRIDGE-MIB implementation to cover RFC 4363 (#630157)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-31
changelog:
  - fixed BRIDGE-MIB implementation in /usr/bin/snmp-bridge-mib,
    now it supports embedded perl and answers GETNEXT requests correctly
    (#630157).


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-32
changelog:
  - fixed varbind parsing in python netsnmp module (#711481)
  - fixed session initialization in python netsnmp module (#710667)
  - fixed crash when getting out-of-memory in inetNetToMediaTable (#708947)
  - added xfs and jfs filesystem support to hrStorageTable (#707912)
  - fixed snmpd to purge zombies resulted from pass_persist process exit
    (#703682)
  - added a log message when snmpd detects two interfaces with the same
    IP address and thus having only one ipTable entry for both (#702171)
  - added new snmpd.conf options 'interface_fadeout' and
    'interface_replace_old' to controll snmpd behavior when more
    interfaces get the same name (#702165)
  - fixed snmptrapd leaking memory when processing traps in embedded perl
    (#678314)
  - fixed hrSystemDate timezone sign (#683680)
  - fixed snmp logging 'truncating integer value > 32 bits' for
    UCD-SNMP-MIB::systemStats (#681949)
  - fixed rare race condition in hrSWRunTable (#683563)
  - recompiled with relro for better security (#725657)
  - snmpd should not change request-id when sending multiple SMUX messages
    (#708370)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-38
changelog:
  - fixed snmpd crashing with many AgentX subagent (#749227)
  - fixed SNMPv2-MIB::sysObjectID value when "sysObjectID" config file
    option with long OID was used (#786931)
  - fixed value of BRIDGE-MIB::dot1dBasePortIfIndex.1 (#740172)
  - fixed parsing of "proxy" snmpd.conf option not to enable
    verbose logging by default (#746903)
  - added new "realStorageUnits" config file option to support
    disks > 16 TB in hrStorageTable (#741789)
  - added vxfs, reiserfs and ocfs2 filesystem support to hrStorageTable
    (#746903)
  - fixed snmpd sigsegv when embedded perl script registers one handler
    twice (#748907)
  - fixed setting of SNMP-TARGET-MIB::snmpTargetAddrRowStatus via
    SNMP-SET request on 64-bit platforms (#754275)
  - fixed crash when /var/lib/net-snmp/mib_indexes/ files have wrong
    SELinux context (#754971)
  - fixed memory leak when agentx subagent disconnects in the middle
    of request processing (#736580)
  - fixed slow (re-)loads of TCP-MIB::tcpConnectionTable (#789909)
  - removed 'error finding row index in _ifXTable_container_row_restore'
    error message (#788954)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-43
changelog:
  - fixed value of UCD-SNMP-MIB::extCommand to contain full command
    line (#842279)
  - fixed rpath to perl.so (#848319)
  - added support for port numbers in 'clientaddr' configuration
    option (#833013)
  - fixed rare snmptrapd crash on SIGHTERM handling when embedded perl
    is used (#824402)
  - fixed engineID of outgoing traps if 'trapsess -e <engineID>' is used in
    snmpd.conf (#800671)
  - updated documentation of '-c' option of snmptrapd (#784502)
  - fixed endless loop when SIGTEM arrives in middle of internal query
    processing (#851637)
  - fixed UCD-DISKIO-MIB::diskIOLA values (#848155)
  - removed various error log messages related to counte64 expansions
    (#846906)
  - removed various error log messages when IPv6 is disabled (#845157)
  - added support of cvfs filesystem in hrStorageTable (#846532)
  - fixed rare race condintion when populating UCD-SNMP-MIB::prTable,
    which could result in some entries missing in the table (#846436)
  - added support of simfs filesystem in hrStorageTable (#861152)
  - fixed responding to requests on a multihost machine (#825889)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-45
changelog:
  - fixed potential memory leak on realloc failure when processing 'extend'
    option (#893119)
  - added precise enumeration of configuration files searched to
    snmp_config(5) man page (#907571)
  - set permissions of snmpd.conf and snmptrapd conf to 0600 (#919239)
  - fixed kernel threads in hrSWRunTable (#919952)
  - fixed various error codes in Python module (#955771)
  - fixed snmpd crashing in the middle of agentx request processing when
    a subagent disconnects (#955511)
  - allow 'includeFile' and 'includeDir' options in configuration files
    (#917816)
  - fixed netlink message size (#927474)
  - fixed IF-MIB::ifSpeedHi on systems with non-standard interface speeds
    (#947973)
  - fixed BRIDGE-MIB::dot1dBasePortTable not to include the bridge itself
    as a port (#960568)
  - fixed snmpd segfault when 'agentaddress' configuration options is used
    and too many SIGHUP signals are received (#968898)
  - updated UCD-SNMP-MIB::dskTable to dynamically add/remove disks
    if 'includeAllDisks' is specified in snmpd.conf (#922691)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-46
changelog:
  - fixed parsing of bulk responses (#983116)
  - added support of vzfs filesystem in hrStorageTable (#989498)
  - fixed endless loop when parsing sendmail configuration file with
    queue groups (#991213)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-49
changelog:
  - fixed snmp daemons and utilities crashing in FIPS mode (#1001830)
  - added support of btrfs filesystem in hrStorageTable (#1006706)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-50
changelog:
  - added 'diskio' option to snmpd.conf, it's possible to monitor only selected
    devices in diskIOTable (#990674)
  - fixed CVE-2014-2284: denial of service flaw in Linux implementation of
    ICMP-MIB (#1073223)
  - added cache to hrSWRunTable to provide consistent results (#1007634)
  - skip 'mvfs' (ClearCase) when skipNFSInHostResources is enabled (#1073237)
  - fixed snmptrapd crashing on forwarding SNMPv3 traps (#1131844)
  - fixed HOST-RESOURCES-MIB::hrSystemProcesses (#1134335)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-51
changelog:
  - added faster caching into IP-MIB::ipNetToMediaTable (#789500)
  - fixed compilation with "-Werror=format-security" (#1181994)
  - added clear error message when port specified in 'clientaddrr' config
    option cannot be bound (#886468)
  - fixed error check in IP-MIB::ipAddressTable (#1012430)
  - fixed agentx client crash on failed response (#1023570)
  - fixed dashes in net-snmp-config.h (#1034441)
  - fixed crash on monitor trigger (#1050970)
  - fixed 'netsnmp_assert 1 == new_val->high failed' message in system log
    (#1065210)
  - fixed parsing of 64bit counters from SMUX subagents (#1069046)
  - Fixed HOST-RESOURCES-MIB::hrProcessorTable on machines with >100 CPUs
    (#1070075)
  - fixed net-snmp-create-v3-user to have the same content on 32 and 64bit
    installations (#1073544)
  - fixed IPADDRESS value length in Python bindings (#1100099)
  - fixed hrStorageTable to contain 31 bits integers (#1104293)
  - fixed links to developer man pages (#1119567)
  - fixed storageUseNFS functionality in hrStorageTable (#1125793)
  - fixed netsnmp_set Python bindings call truncating at the first '\000'
    character (#1126914)
  - fixed log level of SMUX messages (#1140234)
  - use python/README to net-snmp-python subpackage (#1157373)
  - fixed forwarding of traps with RequestID=0 in snmptrapd (#1146948)
  - fixed typos in NET-SNMP-PASS-MIB and SMUX-MIB (#1162040)
  - fixed close() overhead of extend commands (#1188295)
  - fixed lmSensorsTable not reporting sensors with duplicate names (#967871)
  - fixed hrDeviceTable with interfaces with large ifIndex (#1195547)


author: Jan Safranek <jsafrane@redhat.com> - 1:5.5-52
changelog:
  - Fixed snmptrapd crash when '-OQ' parameter is used and invalid trap is
    received (#CVE-2014-3565)


author: Christopher Aillon <caillon@redhat.com> 4.6-4
changelog:
  - Use the NSPR version numbering scheme reported by NSPR,
    which unfortunately is not exactly the same as the real
    version (4.6 != 4.6.0 according to RPM and pkgconfig).


author: Christopher Aillon <caillon@redhat.com>
changelog:
  - Stop shipping static libraries; NSS and dependencies no longer
    require static libraries to build.


author: Kai Engert <kengert@redhat.com> 4.6.1-2
changelog:
  - Do not use -ansi when compiling, because of a compilation
    problem with latest glibc and anonymous unions.
    See also bugzilla.mozilla.org # 322427.


author: Kai Engert <kengert@redhat.com> - 4.6.5-2
changelog:
  - Update to latest ipv6 upstream patch
  - Add upstream patch to fix a thread cleanup issue
  - Now requires pkgconfig


author: Kai Engert <kengert@redhat.com> - 4.6.6-2
changelog:
  - Update thread-cleanup patch to latest upstream version
  - Add upstream patch to support PR_STATIC_ASSERT


author: Elio Maldonado <emaldona@redhat.com> - 4.9.5-3
changelog:
  - Bump the release tag so it's higher than the one for rhel-6.4.z
  - Resolves: rhbz#919180 - Rebase to nspr-4.9.5


author: Elio Maldonado <emaldona@redhat.com> - 4.10.0-1
changelog:
  - Update Version to 4.10.0 to prevent Mozilla apps update problems as
  - reported and fixed on https://bugzilla.redhat.com/show_bug.cgi?id=981166
  - Resolves: rhbz#1002643 - Rebase RHEL 6 to NSPR 4.10 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 4.10.0-2
changelog:
  - Rebase to nspr-4.10.2
  - Resolves: rhbz#1032488 - CVE-2013-5607 (MFSA 2013-103) Avoid unsigned integer wrapping in PL_ArenaAllocate (MFSA 2013-103)


author: Elio Maldonado <emaldona@redhat.com> - 4.10.8-1
changelog:
  - Rebase to nspr-4.10.8
  - Resolves: Bug 1200920 - Rebase nspr to 4.10.8 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 4.10.8-2
changelog:
  - Resolves: Bug 1269360 - CVE-2015-7183
  - nspr: heap-buffer overflow in PL_ARENA_ALLOCATE can lead to crash (under ASAN), potential memory corruption


author: Christopher Aillon <caillon@redhat.com> 3.11-0.cvs
changelog:
  - Initial import into Fedora Core, based on a CVS snapshot of
    the NSS_3_11_RTM tag
  - Fix up the pkcs11-devel subpackage to contain the proper headers
  - Build with RPM_OPT_FLAGS
  - No need to have rpath of /usr/lib in the pc file


author: Kai Engert <kengert@redhat.com> - 3.11.3-2
changelog:
  - Revert the attempt to require latest NSPR, as it is not yet available
    in the build infrastructure.


author: Kai Engert <kengert@redhat.com> - 3.11.5-1
changelog:
  - Update to 3.11.5
  - This update fixes two security vulnerabilities with SSL 2
  - Do not use -rpath link option
  - Added several unsupported tools to tools package


author: Kai Engert <kengert@redhat.com> - 3.11.5-2
changelog:
  - Fix rhbz#230545, failure to enable FIPS mode
  - Fix rhbz#220542, make NSS more tolerant of resets when in the 
    middle of prompting for a user password.


author: Kai Engert <kengert@redhat.com> - 3.11.7-2
changelog:
  - Update to 3.11.7, but freebl/softokn remain at 3.11.5.
  - Use a workaround to avoid mozilla bug 51429.


author: Kai Engert <kengert@redhat.com> - 3.11.7-10
changelog:
  - Add /etc/prelink.conf.d/nss-prelink.conf in order to blacklist
    our signed libraries and protect them from modification.


author: Kai Engert <kengert@redhat.com> - 3.11.99.3-2
changelog:
  - Build against gcc 4.3.0, use workaround for bug 432146
  - Run the test suite after the build and abort on failures.


author: Kai Engert <kengert@redhat.com> - 3.12.0.3-3
changelog:
  - nss package should own /etc/prelink.conf.d folder, rhbz#452062
  - use upstream patch to fix test suite abort


author: Kai Engert <kaie@redhat.com> - 3.12.3-3
changelog:
  - ship .chk files instead of running shlibsign at install time
  - include .chk file in softokn-freebl subpackage
  - add patch for upstream nss bug 488350


author: Kai Engert <kaie@redhat.com> - 3.12.3-7
changelog:
  - re-enable test suite
  - add patch for upstream bug 488646 and add newer paypal
    certs in order to make the test suite pass


author: Elio Maldonado <emaldona@redhat.com> - 3.12.3.99.3-5
changelog:
  - updated pem module incorporates various patches
  - fix off-by-one error when computing size to reduce memory leak. (483855)
  - fix data type to work on x86_64 systems. (429175)
  - fix various memory leaks and free internal objects on module unload. (501080)
  - fix to not clone internal objects in collect_objects().  (501118)
  - fix to not bypass initialization if module arguments are omitted. (501058)
  - fix numerous gcc warnings. (500815)
  - fix to support arbitrarily long password while loading a private key. (500180) 
  - fix memory leak in make_key and memory leaks and return values in pem_mdSession_Login (501191)


author: Elio Maldonado <emaldona@redhat.com> - 3.12.3.99.3-10
changelog:
  - must install libnssutil3.since nss-util is untagged at the moment
  - preserve time stamps when installing various files


author: Elio Maldonado+emaldona@redhat.com - 3.12.3.99.3-11
changelog:
  - split off nss-softokn and nss-util as subpackages with their own rpms
  - first phase of splitting nss-softokn and nss-util as their own packages


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-19
changelog:
  - remove patches that are now in nss-softokn and
  - remove spurious exec-permissions for nss.pc per rpmlint
  - single requires line in nss.pc.in


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-22
changelog:
  - Fix nss-config not to include nssutil
  - Add BuildRequires on nss-softokn and nss-util since build also runs the test suite


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-25
changelog:
  - Remove nss-prelink.conf as signed all shared libraries moved to nss-softokn
  - Add a temprary hack to nss.pc.in to unblock builds


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-29
changelog:
  - Restoring patches 2 and 7 as we still compile all sources
  - Applying the nss-nolocalsql.patch solves nss-tools sqlite dependency problems


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-30
changelog:
  - Fix FORTIFY_SOURCE buffer overflows in test suite on ppc and ppc64 - bug 519766
  - Fixed requires and buildrequires as per recommendations in spec file review


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-2
changelog:
  - Remove symbolic links to shared libraries from devel - 521155
  - No rpath-link in nss-softokn-config


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-3
changelog:
  - PEM module implements memory management for internal objects - 509705
  - PEM module doesn't crash when processing malformed key files - 512019


author: Elio Maldonado<emaldona@redhat.com - 3.12.4-9
changelog:
  - Install blank databases and configuration file for system shared database
  - nsssysinit queries system for fips mode before relying on environment variable


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-14
changelog:
  - Fix bug where user was prompted for a password when listing keys on an empty system database (#527048)
  - Fix setup-nsssysinit to handle more general flags formats (#527051)


author: Elio Maldonado<emaldona@redhat.com> - 3.12.5-1.8
changelog:
  - Fix nsssysinit to set the default flags on the crypto module (#545779)
  - Fix nsssysinit to enable apps to use the system cert store, patch contributed by David Woodhouse (#546221)
  - Fix segmentation fault when listing keys or certs in the database, patch contributed by Kamil Dudka (#540387)
  - Sysinit requires coreutils for post install scriplet (#547067)
  - Remove redundant header from the pem module


author: Elio Maldonado <emaldona@redhat.com> - 3.12.5-7.1
changelog:
  - Updated to 3.12.5 from CVS import from Fedora 12
  - Moved blank legacy databases to the lookaside cache
  - Reenabled the full test suite
  - Retagging for a RHEL-6-test-build


author: Elio Maldonado <emaldona@redhat.com> - 3.12.5-7.3
changelog:
  - Resolves: #551784 rebuilt after nss-softokn and nss-util builds
  - this will generate the coorect nss.spec


author: Elio Maldonado <emaldona@redhat.com> - 3.12.6-5
changelog:
  - Appying the changes in previous log
  - Changing some BuildRequires to >= as well
  - Temporarily disabling all tests for faster builds


author: Elio Maldonado <emaldona@redhat.com> - 3.12.8-2
changelog:
  - Add suppport for pkcs8 formatted keys in the pem module
  - Add verify(not md5 size mtime) to configuration files attributes
  - Prevent nss-sysinit disabling on package upgrade
  - Create pkcs11.txt with correct permissions regardless of current umask
  - Add option to setup-nsssysinit.sh to report nss-sysinit status
  - Update test certificate which had expired


author: Elio Maldonado <emaldona@redhat.com> - 3.12.9-2
changelog:
  - Prefer user database ca cert trust settings system's ones
  - Swap internal key slot on fips mode switches


author: Elio Maldonado <emaldona@redhat.com> - 3.12.9-3
changelog:
  - Add requires for pkcs11-devel on nss-softokn-freebl devel
  - Run the test suites in check section per packaging guidelines


author: Elio Maldonado <emaldona@redhat.com> - 3.12.9-7
changelog:
  - Update expired PayPayEE.cert test certificate
  - Conditionalize some database tests on user not being root


author: Elio Maldonado <emaldona@redhat.com> - 3.13.1-1
changelog:
  - Resolves: Bug 744070 - Update to 3.13.1
  - Resolves: Bug 784674 - nss should protect against being called before nss_Init
  - Resolves: Bug 784490 - CVE-2011-3389 HTTPS: block-wise chosen-plaintext attack against SSL/TLS (BEAST)


author: Elio Maldonado <emaldona@redhat.com> - 3.13.1-4
changelog:
  - Add two needed patches
  - Resolves: rhbz#783315 - Need nss workaround for freebl bug that causes openswan to drop connections
  - Resolves: rhbz#747387 - Unable to contact LDAP Server during winsync


author: Elio Maldonado <emaldona@redhat.com> - 3.13.3-1
changelog:
  - Update to 3.13.3
  - Resolves: rhbz#798539 - Distrust MITM subCAs issued by TrustWave
  - Remove builtins-nssckbi_1_88_rtm.patch which the rebase obsoletes


author: Elio Maldonado <emaldona@redhat.com> - 3.13.3-2
changelog:
  - Resolves: rhbz#746632 - pem_CreateObject mem leak on non existing file name
  - Resolves: rhbz#768669 - PEM unregistered callback causes SIGSEGV


author: Elio Maldonado <emaldona@redhat.com> - 3.13.3-3
changelog:
  - Resolves: rhbz#746632 - pem_CreateObject mem leak on non existing file name
  - Use completed patch per code review


author: Elio Maldonado <emaldona@redhat.com> - 3.14.0.0-1
changelog:
  - Rebase to nss-3.14.0.0-1
  - Resolves: rhbz#837089
  - Update ssl-cbc-random-iv patch for new sources
  - Remove patches rendered obsoleted by rebase to 3.14
  - Add a patch to enforce no pkcs11 bypass


author: Elio Maldonado <emaldona@redhat.com> - 3.14.0.0-7
changelog:
  - Add dummy sources file to test for and prevent breaking rhpkg commands
  - Enable testing for 'rhpk upload' and 'rhpk new-sources' breakage such as hangs
  - Related: rhbz#837089


author: Elio Maldonado <emaldona@redhat.com> - 3.14.0.0-8
changelog:
  - PEM peminit returns CKR_CANT_LOCK when needed to inform caller module isn't thread safe
  - Resolves: rhbz#555019 - [PEM] invalid writes in multi-threaded libcurl based application


author: Elio Maldonado <emaldona@redhat.com> - 3.14.0.0-9
changelog:
  - Fix locking issue causing curl hangs and authenticate to the correct session
  - Resolves: rhbz#872838


author: Elio Maldonado <emaldona@redhat.com> - 3.14.0.0-12
changelog:
  - Recreate the distrust patch by backporting the upstream one
  - Resolves: rhpbz#890914 - Dis-trust TURKTRUST mis-issued *.google.com certificate


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-1
changelog:
  - Update to NSS_3.14.3_RTM
  - Resolves: rhbz#918950 - [RFE][RHEL6] Rebase to nss-3.14.3 to fix the lucky-13 issue
  - Update expired test certificates (fixed in upstream bug 852781)
  - Sync up pem module's rsawrapr.c with softoken's upstream changes for nss-3.14.3
  - Reactivate the aia tests


author: Elio Maldonado - 3.14.3-2
changelog:
  - Install sechash.h and secmodt.h which are now provided by nss-devel
  - Resolves: rhbz#918950 - [RFE][RHEL6] Rebase to nss-3.14.3 to fix the lucky-13 issue
  - Remove unsafe -r option from commands that remove headers already shipped by nss-util and nss-softoken


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-3
changelog:
  - Ensure pem uses system freebl as with this update freebl brings in new API's
  - Resolves: rhbz#918950 - [RFE][RHEL6] Rebase to nss-3.14.3 to fix the lucky-13 issue


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-4
changelog:
  - Revert to accepting MD5 on digital signatures by default
  - Resolves: rhbz#918136 - nss 3.14 - MD5 hash algorithm disabled


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-5
changelog:
  - Syncup with uptream changes for aes gcm and ecc suiteb
  - Enable ecc support for suite b
  - Apply several upstream AES GCM fixes
  - Use the pristine nss upstream sources with ecc included
  - Export NSS_ENABLE_ECC=1 in both the build and the check sections
  - Make failed requests for unsupoprted ssl pkcs 11 bypass non fatal
  - Resolves: rhbz#882408 - NSS_NO_PKCS11_BYPASS must preserve ABI
  - Related:  rhbz#918950  - rebase nss to 3.14.3


author: Kai Engert <kaie@redhat.com> - 3.14.3-33
changelog:
  - Configure libnssckbi.so to use the alternatives system
    in order to prepare for a drop in replacement.
    Please ensure that older packages that don't use the alternatives
    system for libnssckbi.so have a smaller n-v-r.


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-34
changelog:
  - Fix race condition in cert code related to smart cards
  - Resolves: rhbz#903017 - Firefox hang when CAC/PIV smart card certificates are viewed in the certificate manager


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-37
changelog:
  - Do not hold issuer certificate handles in the crl cache
  - Resolves: rhbz#961659 - SQL backend does not reload certificates


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-1
changelog:
  - Rebase to NSS_3.15.1_RTM
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x) 
  - Update patches on account of the shallow tree with the rebase to 3.15.1
  - Update the pem module sources  nss-pem-20130405.tar.bz2 with latest patches applied
  - Remove patches rendered obsolete by the nss rebase and the updated nss-pem sources
  - Enable the iquote.patch to access newly introduced types


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-2
changelog:
  - Fix relative path in %check section to prevent undetected test failures
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-4
changelog:
  - Require nss-softokn-fips
  - Resolves: rhbz#993441 - NSS needs to conform to new FIPS standard. [rhel-6.5.0]


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-5
changelog:
  - Disable the cipher suite already run as part of the nss-softokn build
  - Resolves: rhbz#993441 - NSS needs to conform to new FIPS standard. [rhel-6.5.0]


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-6
changelog:
  - Fix all.sh test for which application was last build by updating nss-versus-softoken-test.path
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Kai Engert <kaie@redhat.com> - 3.15.1-7
changelog:
  - Additional syntax fixes in nss-versus-softoken-test.patch
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-8
changelog:
  - Don't require nss-softokn-fips
  - Resolves: rhbz#993441 - NSS needs to conform to new FIPS standard. [rhel-6.5.0]


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-9
changelog:
  - Rebuild for the pem module to link with freel from nss-softokn-3.14.3-6.el6
  - Related: rhbz#993441 - NSS needs to conform to new FIPS standard. [rhel-6.5.0]
  - Related: rhbz#1010224 - NSS 3.15 breaks SSL in OpenLDAP clients


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-10
changelog:
  - Restore a mistakenly removed patch
  - Resolves: rhbz#961659 - SQL backend does not reload certificates


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-11
changelog:
  - Fix the test for zero failures in the %check section
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-12
changelog:
  - Add a zero default value to the DISABLETEST and TEST_FAILURES checks
  - Resolves: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-13
changelog:
  - Add zero default value to DISABLETEST check and fix the TEST_FAILURES check and reporting
  - Resolves: rhbz#990631 - file permissions of pkcs11.txt/secmod.db must be kept when modified by NSS
  - Related: rhbz#1002645 - Rebase RHEL 6 to NSS 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-14
changelog:
  - Add s390x and ia64 to the %define multilib_arches list used for defining alt_ckbi
  - Resolves: rhbz#1016044 - nss.s390: primary link for libnssckbi.so must be /usr/lib64/libnssckbi.so


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-15
changelog:
  - Using export NSS_DISABLE_HW_GCM=1 to deal with some problemmatic build systems
  - Resolves: rhbz#1016044 - nss.s390: primary link for libnssckbi.so must be /usr/lib64/libnssckbi.so


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-1
changelog:
  - Update to NSS_3_15_3_RTM
  - Resolves: Bug 1032472 - CVE-2013-5605 CVE-2013-5606 CVE-2013-1741
  - Resolves: Bug 1031238 - deadlock in trust domain lock and object lock


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-2
changelog:
  - Build nss without softoken, freebl, or util sources in the build source tree
  - Resolves: Bug 1032472 - CVE-2013-5605 CVE-2013-5606 CVE-2013-1741


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-3
changelog:
  - Disable hw gcm on rhel-5 based build environments where OS lacks support
  - Rollback changes to build nss without softokn until Bug 689919 is approved
  - Cipher suite was run as part of the nss-softokn build


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-4
changelog:
  - Revoke trust in one mis-issued anssi certificate
  - Resolves: Bug 1042686 - nss: Mis-issued ANSSI/DCSSI certificate (MFSA 2013-117) [rhel-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-5
changelog:
  - Resolves: Bug 895339 - [PEM] active FTPS with encrypted client key ends up with SSL_ERROR_TOKEN_INSERTION_REMOVAL


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-6
changelog:
  - make derEncodingsMatch work with encrypted keys
  - rename a patch, dropped the experimental moniker from it
  - Resolves: Bug 895339 - [PEM] active FTPS with encrypted client key ends up with SSL_ERROR_TOKEN_INSERTION_REMOVAL


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-7
changelog:
  - Fix the numbering and naming of the patches
  - Resolves: Bug 895339 - [PEM] active FTPS with encrypted client key ends up with SSL_ERROR_TOKEN_INSERTION_REMOVAL


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-8
changelog:
  - Install man pages for the nss security tools
  - Resolves: Bug 606022 - nss security tools lack man pages


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-9
changelog:
  - Improve support for ECDSA algorithm via pluggable ECC
  - Document the purpose of the iquote.patch
  - Resolves: Bug 1057224 - Pluggable ECC in NSS not enabled on RHEL 6 and above


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-10
changelog:
  - Prevent users from disabling the internal crypto module
  - Resolves: Bug 1059176 - nss segfaults with opencryptoki module


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-11
changelog:
  - Resolves: Bug 689919 - build without any softoken or util sources in the tree
  - Add define-uint32.patch to deal with using older version of nss-softokn
  - Fix suboptimal test failure detection shell code in the %check
  unset DISPLAY
   section


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-2
changelog:
  - Restore use of indentation patch until another bug is resolved
  - Resolves: Bug 606022 - nss security tools lack man pages


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-3
changelog:
  - Fix pem module trashing of private keys on failed login
  - Resolves: Bug 1002205 - PEM module trashes private keys if login fails


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-5
changelog:
  - Move removal of directories to the end of the %prep section
  - Resolves: Bug 689919 - build without any softoken or util sources in the tree


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-6
changelog:
  - Update pem sources to the same ones used on rhel-7
  - Remove no longer needed patches on account of this update
  - Resolves: Bug 1002205


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-15
changelog:
  - Resolves: Bug 1165003 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Support TLS_FALLBACK_SCSV in tstclnt and ssltap


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-2
changelog:
  - Restore patch for certutil man page
  - supply missing options descriptions to the man page
  - Resolves: Bug 1158160 - Upgrade to NSS 3.16.2.3 for Firefox 31.3


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-3
changelog:
  - Resolves: Bug 1158160 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Remove unused indentation pseudo patch
  - require nss util 3.16.2.3


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-1
changelog:
  - Rebase to NSS 3.18
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]
  - Keep the same cipher suite order as we had in NSS_3_15_3_RTM
  - Resolves: Bug 1202488 - openldap-2.4.23-34.el6_5.1.i686 fails after updating nss to nss-3.16.1-4.el6_5.i686
  - Resolves: Bug 1182902 - rhel65 ns-slapd crash, segfault error 4 in libnss3.so in PK11_DoesMechanism at pk11slot.c:1824


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-2
changelog:
  - Replace expired PayPal test certificate that breaks the build
  - Resolves: Bug 1207052 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-3
changelog:
  - Restore a patch that had been mistakenly disabled
  - Resolves: Bug 1207052 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-4
changelog:
  - Fix shell syntax error in nss/tests/all.sh
  - Resolves: Bug 1207052 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-5
changelog:
  - Update and reeneable nss-646045.patch on account of the rebase
  - Resolves: Bug 1207052 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL7.1]


author: Kai Engert <kaie@redhat.com> - 3.18.0-5.1
changelog:
  - Require softokn build 22 to ensure runtime compatibility.
  - Update to CKBI 2.4 from NSS 3.18.1 (the only change in NSS 3.18.1)


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-3
changelog:
  - Resolves: Bug 1158160 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Remove unused indentation pseudo patch
  - require nss util 3.16.2.3
  - Restore patch for certutil man page
  - supply missing options descriptions to the man page


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-4
changelog:
  - Keep the same cipher suite order as we had in NSS_3_15_3_RTM
  - Resolves: Bug 1123092 - openldap-2.4.23-34.el6_5.1.i686 fails after updating nss to nss-3.16.1-4.el6_5.i686


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-1
changelog:
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]
  - Resolves: Bug 1131311 - rhel65 ns-slapd crash, segfault error 4 in libnss3.so in PK11_DoesMechanism at pk11slot.c:1824
  - Temporarily disable some tests until expired PayPalEE.cert is renewed


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-2
changelog:
  - Replace expired PayPal test certificate that breaks the build
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-3
changelog:
  - Restore a patch that had been mistakenly disabled
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-4
changelog:
  - Fix shell syntax error in nss/tests/all.sh
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL-6.6]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-5
changelog:
  - Update and reeneable nss-646045.patch on account of the rebase
  - Resolves: Bug 1200900 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL7.1]


author: Kai Engert <kaie@redhat.com> - 3.18.0-5.3
changelog:
  - On RHEL 6.x keep the TLS version defaults unchanged.
  - Require softokn build 22 to ensure runtime compatibility.
  - Relax the requirement from pkcs11-devel to nss-softokn-freebl-devel
    to allow same or newer.
  - Update to CKBI 2.4 from NSS 3.18.1 (the only change in NSS 3.18.1)


author: Elio Maldonado <emaldona@redhat.com> - 3.19.1-8
changelog:
  - Prevent TLS 1.2 Transcript Collision attacks against MD5 in key exchange protocol
  - Resolves: Bug 1289881


author: Elio Maldonado <emaldona@redhat.com> - 3.12.4-11
changelog:
  - Move libfreebl3.so and its .chk file to /lib{64} keeping
  - symbolic links to them in /usr/lib{64} so as not break others


author: Elio Maldonado <emaldona@redhat.com> - 3.12.4-16
changelog:
  - allow prelink of softoken and freebl. Change the verify code to use
    prelink -u if prelink is installed. Fix by Robert Relyea


author: Elio Maldonado <emaldona@redhat.com> - 3.12.6-2.1
changelog:
  - Don't enable FIPS when CONFIG_CRYPTO_FIPS=n
  - Fix typo in the package description
  - Fix capitalization error in prelink conflict statement
  - Require nspr 4.8.4


author: Elio Maldonado <emaldona@redhat.com> - 3.12.9-4
changelog:
  - Resolves: rhbz#710298 - fix intel optimized aes code to handle case where input and ouput are in the same buffer


author: Elio Maldonado - 3.12.9-12
changelog:
  - Bootstrapping of the builroot in preparation for rebase to 3.14.3
  - Remove hasht.h from the %files devel list to prevent update conflicts with nss-util
  - With 3.14.3 hasht.h will be provided by nss-util-devel
  - Related: rhbz#919172 - rebase nss-softokn to 3.14.3


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-1
changelog:
  - Update to NSS_3_14_3_RTM
  - Resolves: rhbz#919172 - Rebase to nss-softokn 3.14.3 to fix the lucky-13 issue
  - Add export LD_LIBRARY_PATH=$RPM_BUILD_ROOT//usr/lib before the signing commands in __spec_install_post scriplet
    to ensure signing tool links with in-tree freebl so verification uses same algorithm as in signing
  - Add %check section to run the upstream crypto reqression test suite as per packaging guidelines
  - Don't install sechash.h or secmodt.h which as per 3.14 are provided by nss-devel
  - Update the licence to MPLv2.0


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-3
changelog:
  - Add patch to conditionally compile according to old or new sqlite api
  - new is used on rhel-6 while rhel-5 uses old but we need the same code for both
  - Resolves: rhbz#919172 - Rebase to nss-softokn 3.14.3 to fix the lucky-13 issue


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-4
changelog:
  - Enable ECC support for suite b and add upstream fixes for aec gcm
  - Use the unstripped upstream sources with ecc support
  - Limit the ECC support to suite b
  - Apply several upstream aes gcm fixes
  - Rename macros EC_MIN_KEY_BITS and EC_MAX_KEY_BITS per upstream
  - Resolves: rhbz#960208 - Enable ECC in nss-softoken
  - Related: rhbz#919172


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-5
changelog:
  - Resolves: rhbz#976572 - Pick up various upstream GCM code fixes applied since nss-3.14.3 was released
  - Display cpuifo as part of the tests and make NSS_DISABLE_HW_GCM the environment variable to test for
  - When appling the patches use a backup file suffix that better describes the patch purpose


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-6
changelog:
  - create -fips packages 
  - patch submitted by Bob Relyea <rrelyea@redhat.com>
  - fix the script that splits softoken off from nss
  - patch nss/cmd/lib/basicutil.c to build against nss-util-3.15.1
  - Resolves: rhbz#993441 - NSS needs to conform to new FIPS standard. [rhel-6.5.0]


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-7
changelog:
  - Fix the PR_Access stub to actually access the correct permissions
  - Resolves: rhbz#1008513 - Unable to login in fips mode
  - Run the lowhash tests
  - Require nspr-4.0.0 and nss-util-3.15.1


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-8
changelog:
  - Enable new packaging but don't apply nss-fips-post.patch
  - Related: rhbz#1008513 - Unable to login in fips mode


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-11
changelog:
  - Skip calls to CHECK_FORK in {C & NSC}_GetFunctionList
  - Resolves: Bug 1053437 - Admin server segfault when configuration DS configured on SSL port


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-12
changelog:
  - Avoid call to sdb_measureAccess in lib/softoken/sdb.c s_open if NSS_SDB_USE_CACHE is "yes" or "no"
  - Resolves: Bug 1044666 - Can curl HTTPS requests make fewer access system calls?


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-15
changelog:
  - Fix shlibsign to return non-zero on failure
  - Resolves: Bug 587634 - shlibsign returns 0 although if fails


author: Bob Relyea <rrelyea@redhat.com> - 3.14.3-21
changelog:
  - Require nss-softokn-freebl of at least the same version and release
  - Resolves: Bug 1182662 - nss-softokn-3.14.3-19.el6_6 breaking yum and rpm


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-23
changelog:
  - Pick up upstream freebl patch for CVE-2015-2730
  - Check for P == Q or P ==-Q before adding P and Q


author: Dennis Gilmore <dennis@ausil.us> 3.12.3.99.3-10
changelog:
  - dont include the headers in nss-util only in the -devel package
  - nss-util-devel Requires nss-devel since its only providing a subset of the headers.


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-11
changelog:
  - Remove spurious executable permissions from nss-util-config
  - Shorten some descriptions to keep rpmlint happy


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-3
changelog:
  - Remove symbolic links to shared libraries from devel - 521155
  - Apply nss-nolocalsql patch subset for nss-util
  - No rpath-link in nss-util-config


author: Elio Maldonado <emaldona@redhat.com> - 3.13.3-2
changelog:
  - Resolves: rhbz#799192 - Update to 3.13.3
  - Update minimum nspr version for Requires and BuildRequires to 4.9
  - Fix version/release in changelog to match the Version and Release tags, now 3.13.3-2


author: Elio Maldonado <emaldona@redhat.com> - 3.13.5-1
changelog:
  - Update to NSS_3_13_5_RTM
  - Resolves: rhbz#833480 - Update nss-util on RHEL 6.x to NSS 3.13.5 for Mozilla 10.0.6
  - Add -L${libdir}/nss3 to Libs: line in nspr.pc.in


author: Elio Maldonado <emaldona@redhat.com> - 3.13.5-3
changelog:
  - Update to nss-3.14.0.0-1
  - Add temporary patch so utilmod doesn't include any headers from softoken
  - Keep the hasht.h from current nss-softokn-devel
  - Remove the long obsoleted nss-nolocalsql.patch


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-1
changelog:
  - Update to NSS_3_14_3_RTM
  - Resolves: rhbz#919174 - Rebase to 3.14.3 as part of the fix for the lucky-13 issue


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-4
changelog:
  - Resolves: rhbz#976572 - Pick up various upstream GCM code fixes applied since nss-3.14.3 was released


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-5
changelog:
  - Update to NSS_3_15_1_RTM
  - Resolves: rhbz#1002644 - Rebase RHEL 6 to NSS-UTIL 3.15.1 (for FF 24.x)


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-3
changelog:
  - Preserve existing permissions when replacing existing pkcs11.txt file, but keep strict default permissions for new files
  - Resolves: rhbz#990631 - file permissions of pkcs11.txt/secmod.db must be kept when modified by NSS


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-2
changelog:
  - Add nss-util portion of a fix for pluggable ecc bug in nss and nss-util
  - Resolves: Bug 1057224 - Pluggable ECC in NSS not enabled on RHEL 6 and above


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-3
changelog:
  - Apply the patch for the pluggable ecc fix
  - Resolves: Bug 1057224 - Pluggable ECC in NSS not enabled on RHEL 6 and above


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-4
changelog:
  - nssutil_growList and nssutil_ReadSecmodDB cleanup
  - Resolves: Bug 1019529 - New defect found in nss-util-3.14.0.0-2.el6


author: Elio Maldonado <emaldona@redhat.com> - 3.16.1-4
changelog:
  - Resolves: Bug 1165003 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Remove patches rendered obsolete by the rebase


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-2
changelog:
  - Resolves: Bug 1165003 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Fix the required nspr version to be 4.10.6


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-1
changelog:
  - Resolves: Bug 1158160 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Remove patches rendered obsolete by the rebase


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-2
changelog:
  - Fix the required nspr version to be 4.10.6
  - Resolves: Bug 1158160 - Upgrade to NSS 3.16.2.3 for Firefox 31.3


author: Elio Maldonado <emaldona@redhat.com> - 3.21.0-0.3
changelog:
  - Rebase RHEL 6.7.z to NSS-util 3.21 in preparation for Firefox 45
  - Resolves: Bug 1299874
  - Update upstream patch for CVE-2016-1950


author: Rob Crittenden <rcritten@redhat.com> 0.9.1-2
changelog:
  - rename LICENSE to COPYING
  - don't ship the .la in -devel
  - fixup devel requirement to be exactly the parent package, not >=


author: Rob Crittenden <rcritten@redhat.com> 0.9.2-1
changelog:
  - update to 0.9.2
  - Enable loading the NSS PKCS#11 pem module
  - Add a URL
  - Specify the license as LGPLv2+ instead of just LGPL


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - comment out default values for keys, warn about starting with -A (#19316).
  - take out -A from ntpd startup as well.
  - update to 4.0.99k.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - allow comments in %{_sysconfdir}/ntp/step-tickers file (#28786).
  - need patch0 (glibc patch) on ia64 too


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - require/buildprereq libcap/libcap-devel
  - use 'ntp' user, tune the pre/post scripts, %files
  - add $OPTIONS to the init script


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - Add the remote root exploit patch (based on ntp-hackers).
  - Enhance droproot patch (more documentation, etc.) <Jarno.Huuskonen@uku.fi>
  - Tweak the droproot patch to include sys/prctl.h, not linux/prctl.h
  (implicit declarations)
  - Remote groupdel commands, shouldn't be needed.
  - Removed -Wcast-qual and -Wconversion due to excessive warnings (hackish).
  - Make ntp compilable with both glibc 2.1 and 2.2.x (very dirty hack)
  - Add %{_sysconfdir}/sysconfig/ntpd which drops root privs by default


author: Harald Hoyer <harald@redhat.de>
changelog:
  - new snapshot
  - removed typos and security patch (already there)
  - commented multicastclient in config file


author: Harald Hoyer <harald@redhat.de> 4.1.0-1
changelog:
  - wow, how stupid can a man be ;).. fixed #50698 
  - updated to 4.1.0 (changes are small and in non-critical regions)


author: Harald Hoyer <harald@redhat.de> 4.1.0b-4
changelog:
  - created drift with dummy value #58294
  - grep for timeservers in ntp.conf also for ntpdate #57837
  - check return value of ntpdate #58836


author: Harald Hoyer <harald@redhat.de> 4.1.1b-1
changelog:
  - updated to version 4.1.1b
  - improved initscript - use ntpdate on -x
  - improved initscript - open firewall only for timeservers
  - ntp-4.1.1a-adjtime.patch removed (already in source)
  - ntp-4.1.1a-mfp.patch removed (already in source)
  - ntp-4.0.99j-vsnprintf.patch removed (already in source)


author: Harald Hoyer <harald@redhat.com> - 4.2.0.a.20040617-4
changelog:
  - removed firewall hole punching from the initscript; rely on iptables
    ESTABLISHED,RELATED or manual firewall configuration


author: Jindrich Novy <jnovy@redhat.com> 4.2.0.a.20050816-1
changelog:
  - update to the latest stable 4.2.0.a.20050816
  - drop upstreamed .gcc4, .vsnprintf patches
  - remove obsolete .autofoo patch
  - make patch numbering less chaotic
  - don't package backup for .droproot patch


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-2
changelog:
  - Fix fails on upgrade, if ntpd is disabled (#166773)
  - A cosmetic patch. There are some comments and braces '{' '}' added.
  - One unprintable character was converted to octal-form .
  - It can be removed anytime (conversion of the cvs-projets for C-Frame 121,
  - (auto-debug, auto-trace for cfr-printnet server).


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-3
changelog:
  - A similar patch as ntp-4.0.99j-vsnprintf.patch in FEDORA CORE 4
  - (current patch is ntp-stable-4.2.0a-20050816-vsnprintf.patch)


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-10
changelog:
  - ntpd does not submit his local clock (if there is no peer).
    ntpdate->ntpd #163862 , Patch13: ntp-stable-4.2.0a-20050816-loconly.patch


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-11
changelog:
  - update man pages (#153195, #162856)
  - drop C-Frame-121, vsnprintf, minusTi and loconly patch
  - prevent segfault when loopback interface is not configured (#159056)
  - spec cleanup


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-12
changelog:
  - fix initscript:
    - replace -U with -u in getopts (#187003)
    - don't pass group to ntpdate -U argument and ignore -i in options (#142926)
    - set ntpconf for -c
    - remove -p 8 from ntpdate arguments
    - don't call ntpdate when step-tickers doesn't contain anything useful
      and -x isn't in options
  - fix default keyfile for ntpdate (#183196)


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-14
changelog:
  - modify ntp.conf, change default restrict, remove broadcastdelay,
    use fedora.pool.ntp.org (#189667)
  - don't install drift file
  - remove unsupported options from ntptrace manpage (#137717)
  - fix default paths in manpages for ntp-keygen and ntpdate


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2-3
changelog:
  - fix manycast support in ntpdate (#194329)
  - reply to manycast requests with null refid
  - enable mlockall (#195617)
  - correct threshold value in ntpdate manpage


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2p4-1
changelog:
  - update to 4.2.2p4
  - fix buffer overflow in WWV Audio driver (#216309)
  - don't mark init script as config


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4-1
changelog:
  - update to 4.2.4 (#146884)
  - don't use local clock in default config
  - autogenerate man pages from HTML
  - clean up spec a bit


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4-3
changelog:
  - disable autoopts option preset mechanisms for ntpd
  - document -I option of ntpd
  - generate makewhatis friendly man pages


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4-4
changelog:
  - don't wake up every second (#204748)
  - add option to enable memory locking (#195617)
  - fix broadcast client
  - use option values in ntp-keygen
  - improve man pages


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p0-1
changelog:
  - update to 4.2.4p0
  - fix init script
    - don't add second -g to ntpd options (#228424)
    - update getopts
    - skip all refclocks when parsing ntp.conf
  - spec cleanup


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p0-3
changelog:
  - fix interface updates with -I or -L option (#240254)
  - accept multiple -I options
  - fix broadcast client/server to accept/allow sending
    broadcasts on 255.255.255.255 (#226958)
  - fix return codes in init script (#240120)
  - exit with nonzero code if ntpd -q did not set clock (#240134)
  - drop revert452 patch, fixed in kernel 2.6.19
  - make with _smp_mflags


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p2-2
changelog:
  - ignore tentative addresses (#246297)
  - improve init script (#247003)
  - fix sleep patch
  - ease Autokey setup (#139673)
    - change default keysdir to /etc/ntp/crypto
    - set crypto password in /etc/ntp/crypto/pw
    - don't use randfile if /dev/urandom is used by OpenSSL
  - change default statsdir to /var/log/ntpstats/, use statistics type
    as default filename
  - package more doc files


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p2-5
changelog:
  - avoid use of uninitialized floating-point values in clock_select
  - update license tag (Tom "spot" Callaway)
  - drop sntp, MSNTP license is non-free


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-1
changelog:
  - update to 4.2.4p4
  - fix default NTP version for outgoing packets in ntpdate man page
    (#245408)
  - replace BSD with advertising code in ntpdc and ntpq


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-4
changelog:
  - reset kernel frequency when -x option is used
  - create separate init script for ntpdate
  - add note about paths and exit codes to ntpd man page


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-5
changelog:
  - fix building IPv6 support with new glibc-headers (#436713)
  - avoid unaligned memory access (#435301)
  - fix receiving broadcasts on 255.255.255.255


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-7
changelog:
  - reload resolv.conf after temporary failure in name resolution (#456743)
  - use clock_gettime
  - make subpackages for perl scripts and ntpdate (#452097, #456116)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p5-2
changelog:
  - retry failed name resolution few times before giving up (#460561)
  - don't write drift file upon exit
  - run ntpq with full path in ntp-wait script


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p6-1
changelog:
  - update to 4.2.4p6 (CVE-2009-0021)
  - include dhclient script (David Cantrell)
  - convert COPYRIGHT to UTF-8


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p6-4
changelog:
  - don't restart ntpd in dhclient script with every renewal
  - fix buffer overflow in ntpq (#490617)
  - check status in condrestart (#481261)
  - don't crash when compiled with HAVE_TIMER_CREATE (#486217)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p7-1
changelog:
  - update to 4.2.4p7 (CVE-2009-1252)
  - improve PLL response when kernel discipline is disabled
  - don't log STA_MODE changes
  - enable nanokernel support
  - allow minpoll 3
  - increase memlock limit
  - move html documentation to -doc subpackage (#492444)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p7-2
changelog:
  - fix frequency calculation when starting with no drift file
  - reduce phase adjustments beyond Allan intercept in daemon PLL


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p7-3
changelog:
  - handle system time jumps better
  - don't wake up every second for refclocks without timer
  - don't crash in ntpstat when unknown clock type is received (#505564)
  - make ntpstat process first packet in multipacket response
  - switch to editline
  - set pool.ntp.org vendor zone in spec (#512711)
  - compile with -fno-strict-aliasing


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-1
changelog:
  - update to 4.2.6p5 (#654004, #641800, #714079, #714084, #716968, #819781,
    - bind broadcast client to new interfaces (#973807)
  - allow selection of cipher for private key files (#749530)
  - retry few times in ntpdate init script before giving up (#673198)
  - print synchronization distance instead of dispersion in ntpstat (#830821)
  - ignore duplicate servers from dhclient (#862983)
  - add fourth server to default ntp.conf and use iburst (#667524, #623616)
  - drop comment enabling local driver in default config (#816645)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-2
changelog:
  - don't generate weak control key for resolver (CVE-2014-9293)
  - don't generate weak MD5 keys in ntp-keygen (CVE-2014-9294)
  - fix buffer overflows via specially-crafted packets (CVE-2014-9295)
  - don't mobilize passive association when authentication fails (CVE-2014-9296)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-3
changelog:
  - validate lengths of values in extension fields (CVE-2014-9297)
  - drop packets with spoofed source address ::1 (CVE-2014-9298)
  - add nanosecond support to SHM refclock (#1117704)
  - allow creating all SHM segments with owner-only access (#1122015)
  - allow symmetric keys up to 32 bytes again (#1053551)
  - fix calculation of root dispersion (#1045376)
  - fix crash in ntpq mreadvar command (#1165141)
  - don't step clock for leap second with -x option (#1190619)
  - don't drop packets with source port below 123 (#1171630)
  - use larger RSA exponent in ntp-keygen (#1184421)
  - refresh peers on routing updates (#1193850)
  - increase memlock limit again (#1053568)
  - warn when monitor can't be disabled due to limited restrict (#1166596)
  - improve documentation of restrict command (#1069019)
  - update logconfig documentation for patched default (#1193849)
  - don't build ntpsnmpd (#995134)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-5
changelog:
  - reject packets without MAC when authentication is enabled (CVE-2015-1798)
  - protect symmetric associations with symmetric key against DoS attack
    (CVE-2015-1799)
  - fix generation of MD5 keys with ntp-keygen on big-endian systems
    (CVE-2015-3405)
  - log when stepping clock for leap second or ignoring it with -x (#1204625)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-5.el6_7.2
changelog:
  - check origin timestamp before accepting KoD RATE packet (CVE-2015-7704)
  - allow only one step larger than panic threshold with -g (CVE-2015-5300)


author: Brad Hards <bradh@frogmouth.net> - 0:0.8-0.2.svnr674.fc10
changelog:
  - Bump version
  - Install documentation / man pages correctly
  - Remove epoch (per https://bugzilla.redhat.com/show_bug.cgi?id=453395)
  - Remove %post and %postun (per https://bugzilla.redhat.com/show_bug.cgi?id=453395)
  - Remove talloc dependency (per https://bugzilla.redhat.com/show_bug.cgi?id=453395)
  - Take out libmapiproxy, because we aren't up to server side yet.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 1.2.7
  - fix some bugs from bugzilla (#4885, #4887, #4888, #4967)
  - take include files out of base package


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add -D_REENTRANT to make threaded stuff more stable, even though it looks
    like the sources define it, too
  - mark *.ph files in migration tools as config files


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move the defaults for databases and whatnot to /var/lib/ldap (bug #10714)
  - fix some possible string-handling problems


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 1.2.10
  - add revamped version of patch from kos@bastard.net to allow execution as
    any non-root user
  - remove test suite from %build because of weirdness in the build system


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - more minimalistic fix for bug #11111 after consultation with OpenLDAP team
  - backport replacement for the ldapuser patch


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 1.2.11
  - add condrestart logic to init script
  - munge migration scripts so that you don't have to be 
    /usr/share/openldap/migration to run them
  - add code to create pid files in /var/run


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - tweak init script to return error codes properly
  - change initscripts dependency to one on /etc/init.d


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - switch to gdbm; I'm getting off the db merry-go-round
  - tweak the init script some more
  - add instdir to @INC in migration scripts


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - split off clients and servers to shrink down the package and remove the
    base package's dependency on Perl
  - make certain that the binaries have sane permissions


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - build a semistatic slurpd with threads, everything else without
  - disable reverse lookups, per email on OpenLDAP mailing lists
  - make sure the execute bits are set on the shared libraries


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add the nis.schema and inetorgperson.schema to the default server config
  - make ldapadd a hard link to ldapmodify because they're identical binaries


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.0.6
  - add buildprereq on cyrus-sasl-devel, krb5-devel, openssl-devel
  - take the -s flag off of slapadd invocations in migration tools
  - add the cosine.schema to the default server config, needed by inetorgperson


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - try adding the suffix first when doing online migrations
  - force ldapadd to use simple authentication in migration scripts
  - add indexing of a few attributes to the default configuration
  - add commented-out section on using TLS to default configuration


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add missing required attributes to conversion scripts to comply with schema
  - add schema for mail aliases, autofs, and kerberosSecurityObject rooted in
    our own OID tree to define attributes and classes migration scripts expect
  - tweak automounter migration script


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - reorganize the patch list to separate MigrationTools and OpenLDAP patches
  - switch to Luke Howard's rfc822MailMember schema instead of the aliases.schema
  - configure slapd to run as the non-root user "ldap" (#19370)
  - chdir() before chroot() (we don't use chroot, though) (#19369)
  - disable saving of the pid file because the parent thread which saves it and
    the child thread which listens have different pids


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add Norbert Klasen's patch (via Del) to fix searches using ldaps URLs
    (OpenLDAP ITS #889)
  - add "-h ldaps:///" to server init when TLS is enabled, in order to support
    ldaps in addition to the regular STARTTLS (suggested by Del)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - change automount object OID from 1.3.6.1.1.1.2.9 to 1.3.6.1.1.1.2.13,
    per mail from the ldap-nis mailing list


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add support for additional OPTIONS, SLAPD_OPTIONS, and SLURPD_OPTIONS in
    a /etc/sysconfig/ldap file (#23549)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - back out pidfile patches, which interact weirdly with Linux threads
  - mark non-standard schema as such by moving them to a different directory


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - build dummy certificate in %post, use it in default config
  - configure-time shenanigans to help a confused configure script


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move shared libraries to /lib
  - redo init script for better internationalization (#26154)
  - don't use ldaprc files in the current directory (#38402) (patch from
    hps@intermeta.de)
  - add BuildPrereq on tcp wrappers since we configure with
    --enable-wrappers (#43707)
  - don't overflow debug buffer in mail500 (#41751)
  - don't call krb5_free_creds instead of krb5_free_cred_contents any
    more (#43159)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - require cyrus-sasl-md5 (support for DIGEST-MD5 is required for RFC
    compliance) by name (follows from #43079, which split cyrus-sasl's
    cram-md5 and digest-md5 modules out into cyrus-sasl-md5)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add a build-time requirement on pam-devel
  - add a build-time requirement on a sufficiently-new libtool to link
    shared libraries to other shared libraries (which is needed in order
    for prelinking to work)


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.12-1
changelog:
  - update to 2.0.12 to pull in fixes for setting of default TLS options, among
    other things
  - update to migration tools 39
  - drop tls patch, which was fixed better in this release


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - disable kbind support (deprecated, and I suspect unused)
  - configure with --with-kerberos=k5only instead of --with-kerberos=k5
  - build slapd with threads


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.20-2
changelog:
  - temporarily disable optimizations for ia64 arches
  - specify pthreads at configure-time instead of letting configure guess


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.22-2
changelog:
  - switch to an internalized Berkeley DB as the ldbm back-end  (NOTE: this breaks
    access to existing on-disk directory data)
  - add slapcat/slapadd with gdbm for migration purposes
  - remove Kerberos dependency in client libs (the direct Kerberos dependency
    is used by the server for checking {kerberos} passwords)


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.25-1
changelog:
  - update to 2.0.25 "stable", ldbm-over-gdbm (putting off migration of LDBM
    slapd databases until we move to 2.1.x)
  - use %{_smp_mflags} when running make
  - update to MigrationTools 44
  - enable dynamic module support in slapd


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.25-2
changelog:
  - change LD_FLAGS to refer to /usr/kerberos/_libdir instead of
    /usr/kerberos/lib, which might not be right on some arches


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - incorporate fixes from SuSE's security audit, except for fixes to ITS 1963,
    1936, 2007, 2009, which were included in 2.0.26.
  - add two more patches for db 4.1.24 from sleepycat's updates page
  - use openssl pkgconfig data, if any is available


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.27-8
changelog:
  - back down to db 4.0.x, which 2.0.x can compile with in ldbm-over-db setups
  - tweak SuSE patch to fix a few copy-paste errors and a NULL dereference


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.1.17
  - disable the shell backend, not expected to work well with threads
  - drop the kerberosSecurityObject schema, the krbName attribute it
    contains is only used if slapd is built with v2 kbind support


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - install the db utils for the bundled libdb as %{_sbindir}/slapd_db_*
  - install slapcat/slapadd from 2.0.x for migration purposes


author: Nalin Dahyabhai <nalin@redhat.com> 2.1.22-0
changelog:
  - 2.1.22 now badged stable
  - be more aggressive in what we index by default
  - use/require libtool 1.5


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - actually require newer libtool, as was intended back in 2.1.22-0, noted as
    missed by Jim Richardson


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - build bundled libdb for slapd dynamically to make the package smaller,
    among other things
  - on tls-capable arches, build libdb both with and without shared posix
    mutexes, otherwise just without
  - disable posix mutexes unconditionally for db 4.0, which shouldn't need
    them for the migration cases where it's used
  - update to MigrationTools 45


author: Nalin Dahyabhai <nalin@redhat.com> 2.1.25-1
changelog:
  - change logging facility used from daemon to local4 (#112730, reversing #11047)
    BEHAVIOR CHANGE - SHOULD BE MENTIONED IN THE RELEASE NOTES.


author: Nalin Dahyabhai <nalin@redhat.com> 2.1.25-2
changelog:
  - fix incorrect use of find when attempting to detect a common permissions
    error in the init script (#114866)


author: Thomas Woerner <twoerner@redhat.com> 2.1.29-3
changelog:
  - removed rpath
  - added pie patch: slapd and slurpd are now pie
  - requires libtool >= 1.5.6-2 (PIC libltdl.a)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.13-1
changelog:
  - add compat-openldap subpackage
  - default to bdb, as upstream does, gambling that we're only going to be
    on systems with nptl now


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.13-2
changelog:
  - build a separate, static set of libraries for openldap-devel with the
    non-standard ntlm bind patch applied, for use by the evolution-connector
    package (#125579), and installing them under
    evolution_connector_prefix)
  - provide openldap-evolution-devel = version-release in openldap-devel
    so that evolution-connector's source package can require a version of
    openldap-devel which provides what it wants


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move slapd startup to earlier in the boot sequence (#103160)
  - update to 2.2.15 (stable-20040822)
  - change version number on compat-openldap to include the non-compat version
    from which it's compiled, otherwise would have to start 2.2.15 at release 3
    so that it upgrades correctly


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.2.17 (stable-20040923) (#135188)
  - move nptl libraries into arch-specific subdirectories on x86 boxes
  - require a newer glibc which can provide nptl libpthread on i486/i586


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.20-1
changelog:
  - update to 2.2.20 (stable-20050103)
  - warn about unreadable krb5 keytab files containing "ldap" keys
  - warn about unreadable TLS-related files
  - own a ref to subdirectories which we create under _libdir/tls


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.23-1
changelog:
  - update to 2.2.23 (stable-20050125)
  - update notes on upgrading from earlier versions
  - drop slapcat variations for 2.0/2.1, which choke on 2.2's config files


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.24-1
changelog:
  - update to 2.2.24 (stable 20050318)
  - export KRB5_KTNAME in the init script, in case it was set in the sysconfig
    file but not exported


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.2.26 (stable 20050429)
  - enable the lmpasswd scheme
  - print a warning if slaptest fails, slaptest -u succeeds, and one of the
    directories listed as the storage location for a given suffix in slapd.conf
    contains a readable file named __db.001 (#118678)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.26-1
changelog:
  - run slaptest with the -u flag if no id2entry db files are found, because
    you can't check for read-write access to a non-existent database (#156787)
  - add _sysconfdir/openldap/cacerts, which authconfig sets as the
    TLS_CACERTDIR path in /etc/openldap/ldap.conf now
  - use a temporary wrapper script to launch slapd, in case we have arguments
    with embedded whitespace (#158111)


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Add the tls-fix-connection-test patch to close
    bz#161991 openldap password disclosure issue
  - add the hop patches to prevent infinite looping when chasing referrals.
    OpenLDAP ITS #3578


author: Jay Fenlason <fenlason@redhat.com> 2.2.26-2
changelog:
  - Move the slapd.pem file to /etc/pki/tls/certs
    and edit the -config patch to match to close
    bz#143393  Creates certificates + keys at an insecure/bad place
  - also use _sysconfdir instead of hard-coding /etc


author: Jay Fenlason <fenlason@redhat.com> 2.3.11-2
changelog:
  - Upgrade to 2.3.11, which upstream now considers stable.
  - Switch compat-openldap to 2.2.29
  - remove references to nss_ldap_build from the spec file
  - remove references to 2.0 and 2.1 from the spec file.
  - reorganize the build() function slightly in the spec file to limit the
    number of redundant and conflicting options passedto configure.
  - Remove the attempt to hardlink ldapmodify and ldapadd together, since
    the current make install make ldapadd a symlink to ldapmodify.
  - Include the -ads patches to allow SASL binds to an Active Directory
    server to work.  Nalin <nalin@redhat.com> wrote the patch, based on my
    broken first attempt.


author: Jay Fenlason <fenlason@redhat.com> 2.3.11-3
changelog:
  - Remove Requires: cyrus-sasl and cyrus-sasl-md5 from openldap- and
    compat-openldap- to close
    bz#173313 Remove exlicit 'Requires: cyrus-sasl" + 'Requires: cyrus-sasl-md5'


author: Jay Fenlason <fenlason@redhat.com> 2.3.19-2
changelog:
  - Upgrade to 2.3.19, which upstream now considers stable
  - Modify the -config.patch, ldap.init, and this spec file to put the
    pid file and args file in an ldap-owned openldap subdirectory under
    /var/run.
  - Move back_sql* out of _sbindir/openldap , which requires
    hand-moving slapd and slurpd to _sbindir, and recreating symlinks
    by hand.
  - Retire openldap-2.3.11-ads.patch, which went upstream.
  - Update the ldap.init script to run slaptest as the ldap user rather
    than as root.  This solves
    bz#150172 Startup failure after database problem
  - Add to the servers post and preun scriptlets so that on preun, the
    database is slapcatted to /var/lib/ldap/upgrade.ldif and the
    database files are saved to /var/lib/ldap/rpmorig.  On post, if
    /var/lib/ldap/upgrade.ldif exists, it is slapadded.  This means that
    on upgrades from 2.3.16-2 to higher versions, the database files may
    be automatically upgraded.  Unfortunatly, because of the changes to
    the preun scriptlet, users have to do the slapcat, etc by hand when
    upgrading to 2.3.16-2.  Also note that the /var/lib/ldap/rpmorig
    files need to be removed by hand because automatically removing your
    emergency fallback files is a bad idea.
  - Upgrade internal bdb to db-4.4.20.  For a clean upgrade, this will
    require that users slapcat their databases into a temp file, move
    /var/lib/ldap someplace safe, upgrade the openldap rpms, then
    slapadd the temp file.


author: Jay Fenlason <fenlason@redhat.com> 2.3.27-2
changelog:
  - New upstream release
  - Include the gethostbyname_r patch so that nss_ldap won't hang
    on recursive attemts to ldap_initialize.


author: Jay Fenlason <fenlason@redhat.com> 2.3.27-3
changelog:
  - Include --enable-multimaster to close
    bz#185821: adding slapd_multimaster to the configure options
  - Upgade guide.html to the correct one for openladp-2.3.27, closing
    bz#190383: openldap 2.3 packages contain the administrator's guide for 2.2
  - Remove the quotes from around the slaptestflags in ldap.init
    This closes one part of
    bz#204593: service ldap fails after having added entries to ldap
  - include __db.* in the list of files to check ownership of in
    ldap.init, as suggested in
    bz#199322: RFE: perform cleanup in ldap.init


author: Thomas Woerner <twoerner@redhat.com> 2.3.30-1.1
changelog:
  - tcp_wrappers has a new devel and libs sub package, therefore changing build
    requirement for tcp_wrappers to tcp_wrappers-devel


author: Jay Fenlason <fenlason<redhat.com> 2.3.34-1
changelog:
  - New upstream release
  - Upgrade the scripts for migrating the database so that they might
    actually work.
  - change bind-libbind-devel to bind-devel in BuildPreReq


author: Jan Safranek <jsafranek@redhat.com> 2.3.34-2
changelog:
  - slapadd during package update is now quiet (bz#224581)
  - use _localstatedir instead of var/ during build (bz#220970)
  - bind-libbind-devel removed from BuildRequires (bz#216851)
  - slaptest is now quiet during service ldap start, if
    there is no error/warning (bz#143697)
  - libldap_r.so now links with pthread (bz#198226)
  - do not strip binaries to produce correct .debuginfo packages
    (bz#152516)


author: Jan Safranek <jsafranek@redhat.com> 2.3.34-3
changelog:
  - do not create script in /tmp on startup (bz#188298)
  - add compat-slapcat to openldap-compat (bz#179378)
  - do not import ddp services with migrate_services.pl
    (bz#201183)
  - sort the hosts by adders, preventing duplicities
    in migrate*nis*.pl (bz#201540)
  - start slupd for each replicated database (bz#210155)
  - add ldconfig to devel post/postun (bz#240253)
  - include misc.schema in default slapd.conf (bz#147805)


author: Jan Safranek <jsafranek@redhat.com> 2.3.34-4
changelog:
  - Fix initscript return codes (#242667)
  - Provide overlays (as modules; #246036, #245896)
  - Add available modules to config file


author: Jan Safranek <jsafranek@redhat.com> 2.3.34-6
changelog:
  - fix compat-slapcat compilation. Now it can be found in 
    /usr/lib/compat-openldap/slapcat, because the tool checks argv[0]
    (#246581)


author: Jan Safranek <jsafranek@redhat.com> 2.3.37-2
changelog:
  - do not use specific automake and autoconf
  - do not distinguish between NPTL and non-NPTL platforms, we have NPTL
    everywhere
  - db-4.6.18 integrated
  - updated openldap-servers License: field to reference BDB license


author: Jan Safranek <jsafranek@redhat.com> 2.3.38-2
changelog:
  - skeleton /etc/sysconfig/ldap added
  - new SLAPD_LDAP option to turn off listening on ldap:/// (#292591)
  - fixed checking of SSL (#292611)
  - fixed upgrade with empty database


author: Jan Safranek <jsafranek@redhat.com> 2.4.7-4
changelog:
  - fixed rpmlint warnings and errors
    - /etc/openldap/schema/README moved to /usr/share/doc/openldap


author: Jan Safranek <jsafranek@redhat.com> 2.4.8-3
changelog:
  - reworked the upgrade logic, slapcat/slapadd of the whole database
    is needed only if minor version changes (2.3.x -> 2.4.y)
  - do not try to save database in LDIF format, if openldap-servers package 
    is  being removed (it's up to the admin to do so manually)


author: Jan Safranek <jsafranek@redhat.com> 2.4.8-4
changelog:
  - bdb upgraded to 4.6.21
  - reworked upgrade logic again to run db_upgrade when bdb version
    changes


author: Jan Safranek <jsafranek@redhat.com> 2.4.11-3
changelog:
  - add SLAPD_SHUTDOWN_TIMEOUT to /etc/sysconfig/ldap, allowing admins
    to set non-default slapd shutdown timeout
  - add checkpoint to default slapd.conf file (#458679)


author: Jan Zeleny <jzeleny@redhat.com> 2.4.15-3
changelog:
  - extended previous patch (#481310) to remove options cfMP
    from some client tools
  - correction of patch setugid (#494330)


author: Jan Zeleny <jzeleny@redhat.com> 2.4.16-1
changelog:
  - rebase of openldap to 2.4.16
  - fixed minor issue in spec file (output looking interactive
    when installing servers)


author: Jan Zeleny <jzeleny@redhat.com> 2.4.18-2
changelog:
  - changed configuration approach. Instead od slapd.conf slapd
    is using slapd.d directory now
  - fix of some issues caused by renaming of init script
  - fix of buffer overflow issue in ldif.c pointed out by new glibc


author: Jan Zeleny <jzeleny@redhat.com> 2.4.18-4
changelog:
  - buffer overflow patch from upstream
  - added /etc/openldap/slapd.d and /etc/openldap/slapd.conf.bak
    to files owned by openldap-servers


author: Jan Zeleny <jzeleny@redhat.com> - 2.4.19-1
changelog:
  - fixed tls connection accepting when TLSVerifyClient = allow
  - /etc/openldap/ldap.conf removed from files owned by openldap-servers
  - minor changes in spec file to supress warnings
  - some changes in init script, so it would be possible to use it when
    using old configuration style
  - rebased openldap to 2.4.19
  - rebased bdb to 4.8.24


author: Jan Zeleny <jzeleny@redhat.com> - 2.4.19-7
changelog:
  - updated usage line in init script
  - changed return code when calling init script with bad arguments


author: Jan Zeleny <jzeleny@redhat.com> - 2.4.19-9
changelog:
  - fixed broken link /usr/sbin/slapschema (#583568)
  - removed some static libraries from openldap-devel (#583575)


author: Jan Zeleny <jzeleny@redhat.com> - 2.4.19-10
changelog:
  - updated overlay list in config file (#586143)
  - config dir slapd.d added to package payload (#585276)
  - init script now creates only symlink, not harldink, in /var/run (#584870)


author: Jan Zeleny <jzeleny@redhat.com> - 2.4.19-12
changelog:
  - updated man pages - only slaptest can convert configuration schema
    (#584787)
  - openldap compiled with -fno-strict-aliasing (#596193)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-4
changelog:
  - rebase to 2.4.23 (Fedora 14) (#644077)
  - uses Mozilla NSS instead of OpenSSL for TLS/SSL
  - added LDIF (ldif.h) to the public API
  - removed embeded Berkeley DB
  - removed autofs schema (use up-to-date version from autofs package instead)
  - removed compat-openldap subpackage (use separate package instead)
  - fixes: ldapsearch -Z hangs server if starttls fails (#652823)
  - fixes: improve SSL/TLS log messages (#652819)
  - fixes: crash when TLS_CACERTDIR contains a subdirectory (#652817)
  - fixes: TLS_CACERTDIR takes precedence over TLS_CACERT (#652816)
  - fixes: openldap should ignore files not in the openssl c_hash format in cacertdir (#652814)
  - fixes: slapd init script gets stuck in an infinite loop (#644399)
  - fixes: Remove lastmod.la from default slapd.conf.bak (#630637)
  - fixes: Mozilla NSS - delay token auth until needed (#616558)
  - fixes: Mozilla NSS - support use of self signed CA certs as server certs (#616554)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-5
changelog:
  - initscript: slaptest with '-u' to skip database opening (#613966)
  - removed slurpd options from sysconfig/ldap
  - fix: verification of self issued certificates (#667795)
  - fix: move libraries from /usr/lib to /lib (#548475)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-7
changelog:
  - fix: some server certificates refused with inadequate type error (#669846)
  - fix: default encryption strength dropped in switch to using NSS (#669845)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-10
changelog:
  - fix: add symlinks for libraries moved in 2.4.23-5 to allow building
    packages which require these libraries in the old location (#678105)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-11
changelog:
  - fix: CVE-2011-1024 ppolicy forwarded bind failure messages cause success
  - fix: CVE-2011-1025 rootpw is not verified for ndb backend
  - fix: openldap startup script ignores ulimit settings (#679356)
  - fix: add symlinks into /usr/lib*/ (#680139)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-13
changelog:
  - fix update: openldap can't use TLS after a fork() (#671553)
  - fix: possible NULL pointer dereferences in NSS non-blocking patch (#684035)
  - fix: move libldif to /lib for consistency (#548475)
  - fix: openldap-servers upgrade hangs or do not upgrade the database (#685119)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-14
changelog:
  - fix update: openldap startup script ignores ulimit settings (#679356)
  - fix update: openldap-servers upgrade hangs or do not upgrade the database (#685119)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-15
changelog:
  - fix: rpm -V fail when upgrading with openldap-devel installed (#693716)
    (remove devel *.so symlinks from /lib and leave them in /usr/lib)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-16
changelog:
  - fix: memleak in tlsm_auth_cert_handler (#717738)
  - fix: segmentation fault of client tool when LDIF input file is not terminated
    by a new line character (#698921)
  - fix: segmentation fault of client tool when input line in LDIF file
    is splitted but indented incorrectly (#701227)
  - fix: server scriptlets require initscripts package (#712358)
  - enable ldapi:/// interface by default
  - set cn=config management ACLs for root user, SASL external schema (#712494)
  - fix: ldapsearch fails if no CA certificate is available (#713525)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-17
changelog:
  - fix: strict aliasing warnings during package build (#723487)
  - add partial RELRO support for libraries (#723999)
  - fix: incorrect behavior of allow/try options of VerifyCert and TLS_REQCERT (#729095)
  - fix: memleak - free the return of tlsm_find_and_verify_cert_key (#729087)
  - fix: TLS_REQCERT=never ignored when the certificate is expired (#722959)
  - fix: matching wildcard hostnames in certificate Subject field does not work (#726984)
  - fix: OpenLDAP server segfaults when using back-sql (#727533)
  - fix: conversion of constraint overlay settings to cn=config is incorrect (#722923)
  - fix: DDS overlay tolerance parametr doesn't function and breakes default TTL (#723514)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-18
changelog:
  - fix: overlay refint option refint_nothing doesn't function correctly (#725479)
  - fix: Unwanted slash printed when installing openldap-servers (#732001)
  - manpage fix: TLS options in documentation are not valid for MozNSS (#684810)
  - fix: NSS_Init* functions are not thread safe (#731168)
  - manpage fix: errors in manual page slapo-unique (#723521) 
  - new feature: honor priority/weight with ldap_domain2hostlist (#730311)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-20
changelog:
  - new feature update: honor priority/weight with ldap_domain2hostlist (#730311)
  - fix regression: openldap built without tcp_wrappers (#742592)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-21
changelog:
  - fix: ldapsearch crashes with invalid parameters (#743781)
  - fix: replication (syncrepl) with TLS causes segfault (#783445)
  - fix: openldap server in MirrorMode sometimes fails to resync via syncrepl (#784211)
  - use portreserve to reserve LDAPS port (636/tcp+udp) (#790687)
  - fix: missing options in manual pages of client tools (#745470)
  - fix: SASL_NOCANON option missing in ldap.conf manual page (#732916)
  - fix: slapd segfaults when certificate key cannot be loaded (#796808)
  - Jan Synáček <jsynacek@redhat.com>
    + fix: overlay constraint with count option work bad with modify operation (#742163)
    + fix: Default SSL certificate bundle is not found by openldap library (#742023)
    + fix: Duplicate close() calls in OpenLDAP (#784203)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-23
changelog:
  - security fix: CVE-2012-1164: assertion failure by processing search queries
    requesting only attributes for particular entry (#813162)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-24
changelog:
  - fix update: Default SSL certificate bundle is not found by openldap library (#742023)
  - fix: memberof overlay on the frontend database causes server segfault (#730745)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-26
changelog:
  - fix: MozNSS CA cert dir does not work together with PEM CA cert file (#818844)
  - fix: memory leak: def_urlpre is not freed (#816168)
  - fix update: Default SSL certificate bundle is not found by openldap library (#742023)


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-28
changelog:
  - CVE-2012-2668 (#825875)
    + cipher suite selection by name can be ignored
    + default cipher suite is always selected


author: Jan Vcelak <jvcelak@redhat.com> 2.4.23-29
changelog:
  - fix: invalid order of TLS shutdown operations (#818572)
  - fix: TLS error messages overwriting in tlsm_verify_cert() (#828787)
  - fix: reading pin from file can make all TLS connections hang (#829319)
  - fix: replication with TLS does not work (#707599)
  - fix: some TLS ciphers cannot be enabled (#852339)
  - fix: connection hangs after fallback to second server when certificate hostname verification fails (#843056)
  - fix: not all certificates in OpenSSL compatible CA certificate directory format are loaded (#811468)
  - fix: MozNSS certificate database in SQL format cannot be used (#857390)
  - fix: libldap does not load PEM certificate if certdb is used as TLS_CACERTDIR (#859858)
  - fix: do not send IPv6 DNS queries when IPv6 is disabled on the host (#835012)
  - fix: modification of olcSyncrepl attribute takes server out of MirrorMode (#821848)


author: Jan Synáček <jsynacek@redhat.com> - 2.4.39-1
changelog:
  - rebase to 2.4.39 (#923680)
    + drop a lot of upstreamed patches, backport the rest
    + compile in mdb
    + remove automatic slapd.conf -> slapd-config conversion


author: Jan Synáček <jsynacek@redhat.com> - 2.4.39-3
changelog:
  - add another missing patch forgotten during the rebase
  - fix: enable dynamic linking - unresolved symbols in the smbk5pwd module


author: Jan Synáček <jsynacek@redhat.com> - 2.4.39-10
changelog:
  - revert previous patch (#1172296)
  - fix: crash in ldap_domain2hostlist when processing SRV record (#1164369)
  - support TLS 1.1 and later (#1160467)
  - enhancement: add ppolicy-check-password (#1155390)


author: Matúš Honěk <mhonek@redhat.com> - 2.4.40-7
changelog:
  - fix: regression: deadlock during SSL_ForceHandshake when getting connection to replica (#1267501)
    + apply (and modify a little) the patch from commit 1eeaeeb7


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Patch to build with neither RSA nor RSAref.
  - Miscellaneous FHS-compliance tweaks.
  - Fix for possibly-compressed man pages.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Move condrestart to server postun.
  - Move key generation to init script.
  - Actually use the right patch for moving the key generation to the init script.
  - Clean up the init script a bit.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to 2.1.1p4, which includes fixes for config file parsing problems.
  - Move the init script back.
  - Add Damien's quick fix for wackiness.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to 20000823 snapshot.
  - Change subpackage requirements from %{version} to %{version}-%{release}
  - Back out the pipe patch.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update x11-askpass to 1.0.2. (#17835)
  - Add BuildPreReqs for /bin/login and /usr/bin/rsh so that configure will
    always find them in the right place. (#17909)
  - Set the default path to be the same as the one supplied by /bin/login, but
    add /usr/X11R6/bin. (#17909)
  - Try to handle obsoletion of ssh-server more cleanly.  Package names
    are different, but init script name isn't. (#17865)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Add BuildPreReq on /usr/include/security/pam_appl.h to be sure we always
    build PAM authentication in.
  - Try setting SSH_ASKPASS if gnome-ssh-askpass is installed.
  - Clean out no-longer-used patches.
  - Patch ssh-add to try to add both identity and id_dsa, and to error only
    when neither exists.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to OpenSSH 2.3.0p1.
  - Update to x11-askpass 1.1.0.
  - Enable keyboard-interactive authentication.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Resync with conditional options in Damien Miller's .spec file for an errata.
  - Change libexecdir from %{_libexecdir}/ssh to %{_libexecdir}/openssh.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Add the primes file from the latest snapshot to the main package (#20884).
  - Add the dev package to the prereq list (#19984).
  - Remove the default path and mimic login's behavior in the server itself.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Disable the built-in MD5 password support.  We're using PAM.
  - Take a crack at doing keyboard-interactive authentication with PAM, and
    enable use of it in the default client configuration so that the client
    will try it when the server disallows password authentication.
  - Build with debugging flags.  Build root policies strip all binaries anyway.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Merge multiple PAM text messages into subsequent prompts when possible when
    doing keyboard-interactive authentication.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to x11-askpass 1.1.1. (#21301)
  - Don't second-guess fixpaths, which causes paths to get fixed twice. (#21290)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Don't treat pam_setcred() failure as fatal unless pam_authenticate() has
    succeeded, to allow public-key authentication after a failure with "none"
    authentication.  (#21268)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - More gettextizing.
  - Close all files after going into daemon mode (needs more testing).
  - Extract patch from CVS to handle auth banners (in the client).
  - Extract patch from CVS to handle compat weirdness.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Don't open a PAM session until we've forked and become the user (#25690).
  - Apply Andrew Bartlett's patch for letting pam_authenticate() know which
    host the user is attempting a login from.
  - Resync with parts of Damien Miller's openssh.spec from CVS.
  - Don't expose KbdInt responses in debug messages (from CVS).
  - Detect and handle errors in rsa_{public,private}_decrypt (from CVS).


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update for 2.5.0p1.
  - Use $RPM_OPT_FLAGS instead of -O when building gnome-ssh-askpass
  - Resync with parts of Damien Miller's openssh.spec from CVS, including
    update of x11 askpass to 1.2.0.
  - Only require openssl (don't prereq) because we generate keys in the init
    script now.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update for 2.5.1p1.
  - Add init script mods from Pekka Savola.
  - Tweak the init script to match the CVS contrib script more closely.
  - Redo patch to ssh-add to try to adding both identity and id_dsa to also try
    adding id_rsa.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Redo patch to move pam_open_session after the server setuid()s to the user.
  - Rework the nopam patch to use be picked up by autoconf.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Chuck the closing patch.
  - Add a trigger to add host keys for protocol 2 to the config file, now that
    configuration file syntax requires us to specify it with HostKey if we
    specify any other HostKey values, which we do.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Revert the patch to move pam_open_session.
  - Init script and spec file changes from Pekka Savola. (#28750)
  - Patch sftp to recognize '-o protocol' arguments. (#29540)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.5.2p1 (includes endianness fixes in the rijndael implementation)
  - don't enable challenge-response by default until we find a way to not
    have too many userauth requests (we may make up to six pubkey and up to
    three password attempts as it is)
  - remove build dependency on rsh to match openssh.com's packages more closely


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.5.2p2
  - call setcred() again after initgroups, because the "creds" could actually
    be group memberships


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make do_pam_setcred() smart enough to know when to establish creds and
    when to reinitialize them
  - add in a couple of other fixes from Damien for inclusion in the errata


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - mention that challengereponse supports PAM, so disabling password doesn't
    limit users to pubkey and rsa auth (#34378)
  - bypass the daemon() function in the init script and call initlog directly,
    because daemon() won't start a daemon it detects is already running (like
    open connections)
  - require the version of openssl we had when we were built


author: Preston Brown <pbrown@redhat.com>
changelog:
  - remove explicit openssl requirement, fixes builddistro issue
  - make initscript stop() function wait until sshd really dead to avoid 
    races in condrestart


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - finish marking strings in the init script for translation
  - modify init script to source /etc/sysconfig/sshd and pass $OPTIONS to sshd
    at startup (change merged from openssh.com init script, originally by
    Pekka Savola)
  - refuse to do X11 forwarding if xauth isn't there, handy if you enable
    it by default on a system that doesn't have X installed


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add in Simon Wilkinson's GSSAPI patch to give it some testing in-house,
    to be removed before the next beta cycle because it's a big departure
    from the upstream version


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix an error parsing the new default sshd_config
  - add a fix from Markus Friedl (via openssh-unix-dev) for ssh-keygen not
    dealing with comments right


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - change Copyright: BSD to License: BSD
  - add Markus Friedl's unverified patch for the cookie file deletion problem
    so that we can verify it
  - drop patch to check if xauth is present (was folded into cookie patch)
  - don't apply gssapi patches for the errata candidate
  - clear supplemental groups list at startup


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pull cvs patch to add session initialization to no-pty sessions
  - pull cvs patch to not cut off challengeresponse auth needlessly
  - refuse to do X11 forwarding if xauth isn't there, handy if you enable
    it by default on a system that doesn't have X installed (#49263)


author: Nalin Dahyabhai <nalin@redhat.com> 2.9p2-7
changelog:
  - fix scp's server's reporting of file sizes, and build with the proper
    preprocessor define to get large-file capable open(), stat(), etc.
    (sftp has been doing this correctly all along) (#51827)
  - configure without --with-ipv4-default on RHL 7.x and newer (#45987,#52247)
  - pull cvs patch to fix support for /etc/nologin for non-PAM logins (#47298)
  - mark profile.d scriptlets as config files (#42337)
  - refer to Jason Stone's mail for zsh workaround for exit-hanging quasi-bug
  - change a couple of log() statements to debug() statements (#50751)
  - pull cvs patch to add -t flag to sshd (#28611)
  - clear fd_sets correctly (one bit per FD, not one byte per FD) (#43221)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 3.0p1
  - update to x11-ssh-askpass 1.2.4.1
  - change build dependency on a file from pam-devel to the pam-devel package
  - replace primes with moduli


author: Nalin Dahyabhai <nalin@redhat.com> 3.0p1-1
changelog:
  - merge some of Damien Miller <djm@mindrot.org> changes from the upstream
    3.0p1 spec file and init script


author: Nalin Dahyabhai <nalin@redhat.com> 3.0.2p1-3
changelog:
  - add patches from Simon Wilkinson and Nicolas Williams for GSSAPI key
    exchange, authentication, and named key support


author: Nalin Dahyabhai <nalin@redhat.com> SNAP-20020220
changelog:
  - update to SNAP-20020220 for testing purposes (you've been warned, if there's
    anything to be warned about, gss patches won't apply, I don't mind)


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-1
changelog:
  - require sharutils for building (mindrot #137)
  - require db1-devel only when building for 6.x (#55105), which probably won't
    work anyway (3.1 requires OpenSSL 0.9.6 to build), but what the heck
  - require pam-devel by file (not by package name) again
  - add Markus's patch to compile with OpenSSL 0.9.5a (from
    http://bugzilla.mindrot.org/show_bug.cgi?id=141) and apply it if we're
    building for 6.x


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-2gss
changelog:
  - reintroduce Simon's gssapi patches
  - add buildprereq for autoconf253, which is needed to regenerate configure
    after applying the gssapi patches
  - refresh to the latest version of Markus's patch to build properly with
    older versions of OpenSSL


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-3
changelog:
  - pull patch from CVS to avoid printing error messages when some of the
    default keys aren't available when running ssh-add
  - refresh to current revisions of Simon's patches


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-4
changelog:
  - drop buildreq on db1-devel
  - require pam-devel by package name
  - require autoconf instead of autoconf253 again


author: Nalin Dahyabhai <nalin@redhat.com> 3.3p1-1
changelog:
  - update to 3.3p1
  - merge in spec file changes from upstream (remove setuid from ssh, ssh-keysign)
  - disable gtk2 askpass
  - require pam-devel by filename rather than by package for erratum
  - include patch from Solar Designer to work around anonymous mmap failures


author: Nalin Dahyabhai <nalin@redhat.com> 3.3p1-2
changelog:
  - rework the close-on-exit docs
  - include configuration file man pages
  - make use of nologin as the privsep shell optional


author: Nalin Dahyabhai <nalin@redhat.com> 3.5p1-2
changelog:
  - patch PAM configuration to use relative path names for the modules, allowing
    us to not worry about which arch the modules are built for on multilib systems


author: Nalin Dahyabhai <nalin@redhat.com> 3.5p1-6
changelog:
  - move scp to the -clients subpackage, because it directly depends on ssh
    which is also in -clients (#84329)


author: Nalin Dahyabhai <nalin@redhat.com> 3.6.1p2-6
changelog:
  - modify patch which clears the supplemental group list at startup to only
    complain if setgroups() fails if sshd has euid == 0
  - handle krb5 installed in %{_prefix} or elsewhere by using krb5-config


author: Nalin Dahyabhai <nalin@redhat.com> 3.6.1p2-11
changelog:
  - apply patch to store the correct buffer size in allocated buffers
    (CAN-2003-0693)
  - skip the initial PAM authentication attempt with an empty password if
    empty passwords are not permitted in our configuration (#103998)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - additional fix for apparently-never-happens double-free in buffer_free()
  - extend fix for #103998 to cover SSH1


author: Daniel Walsh <dwalsh@redhat.com> 3.6.1p2-34
changelog:
  * Wed Mar 03 2004 Phil Knirsch <pknirsch@redhat.com> 3.6.1p2-33.30.1
  - Built RHLE3 U2 update package.


author: Nalin Dahyabhai <nalin@redhat.com> 3.8.1p1-1
changelog:
  - request gssapi-with-mic by default but not delegation (flag day for anyone
    who used previous gssapi patches)
  - no longer request x11 forwarding by default


author: Nalin Dahyabhai <nalin@redhat.com> 3.9p1-8
changelog:
  - add a --enable-vendor-patchlevel option which allows a ShowPatchLevel option
    to enable display of a vendor patch level during version exchange (#120285)
  - configure with --disable-strip to build useful debuginfo subpackages


author: Tomas Mraz <tmraz@redhat.com>
changelog:
  - change permissions on pam.d/sshd to 0644 (#64697)
  - patch initscript so it doesn't kill opened sessions if
    the sshd daemon isn't running anymore (#67624)


author: Tomas Mraz <tmraz@redhat.com> 3.9p1-10
changelog:
  - enable trusted forwarding by default if X11 forwarding is 
    required by user (#137685 and duplicates)
  - disable protocol 1 support by default in sshd server config (#88329)
  - keep the gnome-askpass dialog above others (#69131)


author: Tomas Mraz <tmraz@redhat.com> 3.9p1-11
changelog:
  - don't call syslog in signal handler
  - allow password authentication when copying from remote
    to remote machine (#103364)


author: Tomas Mraz <tmraz@redhat.com> 4.0p1-2
changelog:
  - fixed Local/RemoteForward in ssh_config.5 manpage
  - fix fatal when Local/RemoteForward is used and scp run (#153258)
  - don't leak user validity when using krb5 authentication


author: Tomas Mraz <tmraz@redhat.com> 4.1p1-3
changelog:
  - fix small regression caused by the nologin patch (#161956)
  - fix race in getpeername error checking (mindrot #1054)


author: Tomas Mraz <tmraz@redhat.com> 4.1p1-4
changelog:
  - don't deadlock on exit with multiple X forwarded channels (#152432)
  - don't use X11 port which can't be bound on all IP families (#163732)


author: Tomas Mraz <tmraz@redhat.com> 4.1p1-5
changelog:
  - use x11-ssh-askpass if openssh-askpass-gnome is not installed (#165207)
  - install ssh-copy-id from contrib (#88707)


author: Tomas Mraz <tmraz@redhat.com> 4.2p1-2
changelog:
  - use include instead of pam_stack in pam config
  - use fork+exec instead of system in scp - CVE-2006-0225 (#168167)
  - upstream patch for displaying authentication errors


author: Warren Togami <wtogami@redhat.com> - 4.2p1-7
changelog:
  - xorg-x11-devel -> libXt-devel
  - rebuild for new xauth location so X forwarding works
  - buildreq audit-libs-devel
  - buildreq automake for aclocal
  - buildreq imake for xmkmf
  -  -D_GNU_SOURCE in flags in order to get it to build
     Ugly hack to workaround openssh defining __USE_GNU which is
     not allowed and causes problems according to Ulrich Drepper
     fix this the correct way after FC5test1


author: Nalin Dahyabhai <nalin@redhat.com> - 4.2p1-8
changelog:
  - work around missing gccmakedep by wrapping makedepend in a local script
  - remove now-obsolete build dependency on "xauth"


author: Tomas Mraz <tmraz@redhat.com> - 4.2p1-9
changelog:
  - drop x11-ssh-askpass from the package
  - drop old build_6x ifs from spec file
  - improve gnome-ssh-askpass so it doesn't reveal number of passphrase 
    characters to person looking at the display
  - less hackish fix for the __USE_GNU problem


author: Tomas Mraz <tmraz@redhat.com> - 4.3p1-2
changelog:
  - fixed another place where syslog was called in signal handler
  - pass locale environment variables to server, accept them there (#179851)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-3
changelog:
  - enable the subprocess in chroot to send messages to system log
  - sshd should prevent login if audit call fails


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-6
changelog:
  - improve selinux patch (by Jan Kiszka)
  - upstream patch for buffer append space error (#191940)
  - fixed typo in configure.ac (#198986)
  - added pam_keyinit to pam configuration (#198628)
  - improved error message when askpass dialog cannot grab
    keyboard input (#198332)
  - buildrequires xauth instead of xorg-x11-xauth
  - fixed a few rpmlint warnings


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-7
changelog:
  - dropped old ssh obsoletes
  - call the pam_session_open/close from the monitor when privsep is
    enabled so it is always called as root (patch by Darren Tucker)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-8
changelog:
  - drop the pam-session patch from the previous build (#201341)
  - don't set IPV6_V6ONLY sock opt when listening on wildcard addr (#201594)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-9
changelog:
  - don't report duplicate syslog messages, use correct local time (#189158)
  - don't allow spnego as gssapi mechanism (from upstream)
  - fixed memleaks found by Coverity (from upstream)
  - allow ip options except source routing (#202856) (patch by HP)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-10
changelog:
  - improve gssapi-no-spnego patch (#208102)
  - CVE-2006-4924 - prevent DoS on deattack detector (#207957)
  - CVE-2006-5051 - don't call cleanups from signal handler (#208459)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-11
changelog:
  - merge sshd initscript patches
  - kill all ssh sessions when stop is called in halt or reboot runlevel
  - remove -TERM option from killproc so we don't race on sshd restart


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-13
changelog:
  - improved pam_session patch so it doesn't regress, the patch is necessary
    for the pam_session_close to be called correctly as uid 0


author: Tomas Mraz <tmraz@redhat.com> - 4.5p1-2
changelog:
  - support mls on labeled networks (#220487)
  - support mls level selection on unlabeled networks
  - allow / in usernames in scp (only beginning /, ./, and ../ is special)


author: Tomas Mraz <tmraz@redhat.com> - 4.5p1-8
changelog:
  - fix sftp client problems on write error (#247802)
  - allow disabling autocreation of server keys (#235466)


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-1
changelog:
  - upgrade to latest upstream
  - use libedit in sftp (#203009)
  - fixed audit log injection problem (CVE-2007-3102)


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-4
changelog:
  - do not copy /etc/localtime into the chroot as it is not
    necessary anymore (#193184)
  - call setkeycreatecon when selinux context is established
  - test for NULL privk when freeing key (#391871) - patch by
    Pierre Ossman


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-9
changelog:
  - set FD_CLOEXEC on client socket
  - apply real fix for window size problem (#286181) from upstream
  - apply fix for the spurious failed bind from upstream
  - apply open handle leak in sftp fix from upstream


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-10
changelog:
  - fix race on control master and cleanup stale control socket (#436311)
    patches by David Woodhouse


author: Tomas Mraz <tmraz@redhat.com> - 5.0p1-1
changelog:
  - upgrade to new upstream (#441066)
  - prevent initscript from killing itself on halt with upstart (#438449)
  - initscript status should show that the daemon is running
    only when the main daemon is still alive (#430882)


author: Tomas Mraz <tmraz@redhat.com> - 5.0p1-2
changelog:
  - add LANGUAGE to accepted/sent environment variables (#443231)
  - use pam_selinux to obtain the user context instead of doing it itself
  - unbreak server keep alive settings (patch from upstream)
  - small addition to scp manpage


author: Tomas Mraz <tmraz@redhat.com> - 5.1p1-1
changelog:
  - upgrade to new upstream release
  - fixed a problem with public key authentication and explicitely
    specified SELinux role


author: Tomas Mraz <tmraz@redhat.com> - 5.1p1-4
changelog:
  - set FD_CLOEXEC on channel sockets (#475866)
  - adjust summary
  - adjust nss-keys patch so it is applicable without selinux patches (#470859)


author: Tomas Mraz <tmraz@redhat.com> - 5.1p1-5
changelog:
  - remove obsolete --with-rsh (#478298)
  - add pam_sepermit to allow blocking confined users in permissive mode
    (#471746)
  - move system-auth after pam_selinux in the session stack


author: Jan F. Chadima <jchadima@redhat.com> - 5.2p1-20
changelog:
  - merged xmodifiers to redhat patch
  - merged gssapi-role to selinux patch
  - merged cve-2007_3102 to audit patch
  - sesftp patch only with WITH_SELINUX flag
  - rearange sesftp patch according to upstream request


author: Jan F. Chadima <jchadima@redhat.com> - 5.2p1-28
changelog:
  - Repair initscript to be acord to guidelines (#521860)
  - Add bugzilla# to application of edns and xmodifiers patch


author: Jan F. Chadima <jchadima@redhat.com> - 5.5p1-36
changelog:
  - add ldap backend (#455350)
  - skip sshd init's rsa1 creation in fips mode (#672870)
  - improve audit session key destroy (#642792)


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-71
changelog:
  - enable aes-ctr ciphers use the EVP engines from OpenSSL such as the AES-NI (#756929)
  - add CAVS test driver for the aes-ctr ciphers (#782091)


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-73
changelog:
  - remove openssh-4.3p2-no-v6only.patch (#732955)
  - adjust Linux out-of-memory killer (#744236)
  - fix sshd init script - check existence of crypto (#797384)
  - add RequiredAuthentications[12] (#657378)
  - run privsep slave process as the users SELinux context (#798241)


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-82
changelog:
  - check return value of PK11_Authenticate in ssh-add -n (#782912)
  - document available methods to RequiredAuthentications[12] (#821641)
  - fix ssh-copy-id (#836650)
  - fix segmentation fault in ssh client (#836655)
  - update pam_ssh_agent_auth to 0.9.3 upstream version
  - fix segfault in su when pam_ssh_agent_auth is used and the ssh-agent
    is not running (#834404)


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-85
changelog:
  - fix chroot logging issue (#872169)
  - change the bad key permissions error message (#880575)
  - fix a race condition in ssh-agent (#896561)
  - backport support for PKCS11 from openssh-5.4p1 (#908038)
  - add a KexAlgorithms knob to the client and server configuration (#951704)
  - fix parsing logic of ldap.conf file (#954094)
  - Add HMAC-SHA2 algorithm support (#969565)
  - store krb5 credentials after a pam session is created (#974096)


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-86
changelog:
  - Add support for certificate key types for users and hosts (#906872)
  - Apply RFC3454 stringprep to banners when possible (#955792)


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-87
changelog:
  - bump the minimum value of SSH_USE_STRONG_RNG to 14 according to SP800-131A (#993577)
  - fixed an issue with broken 'ssh -I pkcs11' (#908038)
  - abort non-subsystem sessions to forced internal sftp-server (#993509)
  - reverted 'store krb5 credentials after a pam session is created (#974096)'


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-90
changelog:
  - change default value of MaxStartups - CVE-2010-5107 - #908707
  - add -fips subpackages that contains the FIPS module files (#1001565)


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-95
changelog:
  - adjust the key echange DH groups and ssh-keygen according to SP800-131A (#993580)
  - log failed integrity test if /etc/system-fips exists (#1020803)
  - backport ECDSA and ECDH support (#1028335)


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-96
changelog:
  - prevent a server from skipping SSHFP lookup (#1081338) CVE-2014-2653
  - ignore environment variables with embedded '=' or '\0' characters CVE-2014-2532
  - backport ControlPersist option (#953088)
  - log when a client requests an interactive session and only sftp is allowed (#997377)
  - don't try to load RSA1 host key in FIPS mode (#1009959)
  - restore Linux oom_adj setting when handling SIGHUP to maintain behaviour over restart
    (#1010429)
  - ssh-keygen -V - relative-specified certificate expiry time should be relative to current time
    (#1022459)


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-97
changelog:
  - x11 forwarding - be less restrictive when can't bind to one of available addresses
    (#1027197)
  - better fork error detection in audit patch (#1028643)
  - fix openssh-5.3p1-x11.patch for non-linux platforms (#1100913)


author: Petr Lautrbach <plautrba@redhat.com> 5.3p1-98
changelog:
  - add possibility to autocreate only RSA key into initscript (#1111568)
  - fix several issues reported by coverity


author: Jakub Jelen <jjelen@redhat.com> 5.3p1-105
changelog:
  - Fix ControlPersist option with ProxyCommand (#1160487)
  - Backport fix of ssh-keygen with error : gethostname: File name too long (#1161454)
  - Backport show remote address instead of UNKNOWN after timeout at password prompt (#1161449)
  - Fix printing of extensions in v01 certificates (#1093869)
  - Fix confusing audit trail for unsuccessful logins (#1127312)
  - Don't close fds for internal sftp sessions (#1085710)
  - Fix config parsing quotes (backport) (#1134938)
  - Enable logging in chroot into separate file (#1172224)
  - Fix auditing when using combination of ForcedCommand and PTY (#1131585)
  - Fix ssh-copy-id on non-sh remote shells (#1135521)


author: Jakub Jelen <jjelen@redhat.com> 5.3p1-106
changelog:
  - Add missing ControlPersist option to man ssh (#1197763)
  - Add sftp option to force mode of created files (#1191055)
  - Do not load RSA1 keys in FIPS mode (#1197072)
  - Add missing support for ECDSA in ssh-keyscan (#1196331)
  - Fix coverity/gcc issues (#1196063)
  - Backport wildcard functionality for PermitOpen in sshd_config file (#1159055)
  - Ability to specify an arbitrary LDAP filter in ldap.conf (#1119506)


author: Jakub Jelen <jjelen@redhat.com> 5.3p1-109
changelog:
  - Fix problems with failing persistent connections (#1131585)
  - Fix memory leaks in auditing patch (#1208584)


author: Jakub Jelen <jjelen@redhat.com> 5.3p1-110
changelog:
  - Fix minor problems found by covscan/gcc (#1196063)
  - Add missing options in man ssh (#1197763)
  - Add KbdInteractiveAuthentication documentation to man sshd_config (#1109251)
  - Correct freeing newkeys structure when privileged monitor exits (#1208584)


author: Bernhard Rosenkrdnzer <bero@redhat.de>
changelog:
  - inital packaging
  - changes from base:
    - Move /usr/local/ssl to /usr/share/ssl for FHS compliance
    - handle RPM_OPT_FLAGS


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 0.9.5a, modified for U.S.
  - add perl as a build-time requirement
  - move certificate makefile to another package
  - disable RC5, IDEA, RSA support
  - remove optimizations for now


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - byte-compile python extensions without the build-root
  - adjust the makefile to not remove temporary files (like .key files when
    building .csr files) by marking them as .PRECIOUS


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - remove -Wa,* and -m* compiler flags from the default Configure file (#20656)
  - add the CA.pl man page to the perl subpackage


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - disable some inline assembly, which on x86 is Pentium-specific
  - re-enable MD2 (see http://www.ietf.org/ietf/IPR/RSA-MD-all)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - re-disable MD2 -- the EVP_MD_CTX structure would grow from 100 to 152
    bytes or so, causing EVP_DigestInit() to zero out stack variables in
    apps built against a version of the library without it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 0.9.6
  - enable MD2
  - use the libcrypto.so and libssl.so targets to build shared libs with
  - bump the soversion to 1 because we're no longer compatible with any of
    the various 0.9.5a packages circulating around, which provide lib*.so.0


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 0.9.6a
  - use the build-shared target to build shared libraries
  - bump the soversion to 2 because we're no longer compatible with
    our 0.9.5a packages or our 0.9.6 packages
  - drop the patch for making rsatest a no-op when rsa null support is used
  - put all man pages into <section>ssl instead of <section>
  - break the m2crypto modules into a separate package


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add a script for creating dummy certificates
  - move man pages from %{_mandir}/man?/foo.?ssl to %{_mandir}/man?ssl/foo.?


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.6b-3
changelog:
  - add patches for AEP hardware support
  - add patch to keep trying when we fail to load a cert from a file and
    there are more in the file
  - add missing prototype for ENGINE_ubsec() in engine_int.h


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.6b-4
changelog:
  - move man pages back to %{_mandir}/man?/foo.?ssl from
    %{_mandir}/man?ssl/foo.?
  - add an [ engine ] section to the default configuration file


author: Gary Benson <gbenson@redhat.com> stronghold-0.9.6c-1
changelog:
  - upgrade to 0.9.6c
  - bump BuildArch to i686 and enable assembler on all platforms
  - synchronise with shrimpy and rawhide
  - bump soversion to 3


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.6b-30
changelog:
  - add configuration stanza for x86_64 and use it on x86_64
  - build for linux-ppc on ppc
  - start running the self-tests again


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7-6
changelog:
  - EVP_DecryptInit should call EVP_CipherInit() instead of EVP_CipherInit_ex(),
    to get the right behavior when passed uninitialized context structures
    (#83766)
  - build with -mcpu=ev5 on alpha family (#83828)


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7-8
changelog:
  - add fix to guard against attempts to allocate negative amounts of memory
  - add patch for CAN-2003-0078, fixing a timing attack


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-5
changelog:
  - add patch to harden against Klima-Pokorny-Rosa extension of Bleichenbacher's
    attack (CAN-2003-0131)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - backport fix for engine-used-for-everything from 0.9.7b
  - backport fix for prng not being seeded causing problems, also from 0.9.7b
  - add a check at build-time to ensure that RSA is thread-safe
  - keep perlpath from stomping on the libica configure scripts


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add security fixes for protocol parsing bugs (CAN-2003-0543, CAN-2003-0544)
    and heap corruption (CAN-2003-0545)
  - update RHNS-CA-CERT files
  - ease back on the number of threads used in the threading test


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-22
changelog:
  - add -Wa,--noexecstack to RPM_OPT_FLAGS so that assembled modules get tagged
    as not needing executable stacks


author: Phil Knirsch <pknirsch@redhat.com> 0.9.7a-24
changelog:
  - Use /dev/urandom instead of PRNG for libica.
  - Apply libica-1.3.5 fix for /dev/urandom in icalinux.c
  - Use latest ICA engine patch from IBM.


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-25
changelog:
  - add dependency on zlib-devel for the -devel package, which depends on zlib
    symbols because we enable zlib for libssl (#102962)


author: Joe Orton <jorton@redhat.com> 0.9.7a-27
changelog:
  - updated ca-bundle.crt: removed expired GeoTrust roots, added
    freessl.com root, removed trustcenter.de Class 0 root


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-33
changelog:
  - add an intermediate <openssl/opensslconf.h> which points to the right
    arch-specific opensslconf.h on multilib arches


author: Tomas Mraz <tmraz@redhat.com> 0.9.7e-1
changelog:
  - new upstream source, updated patches
  - added patch so we are hopefully ABI compatible with upcoming
    0.9.7f


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-1
changelog:
  - reenable optimizations on ppc64 and assembly code on ia64
  - upgrade to new upstream version (no soname bump needed)
  - disable thread test - it was testing the backport of the
    RSA blinding - no longer needed
  - added support for changing serial number to
    Makefile.certificate (#151188)
  - make ca-bundle.crt a config file (#118903)


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-2
changelog:
  - add back RC4_CHAR on ia64 and x86_64 so the ABI isn't broken
  - disable broken bignum assembly on x86_64


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-3
changelog:
  - uninitialized variable mustn't be used as input in inline
    assembly
  - reenable the x86_64 assembly again


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-4
changelog:
  - move certificates to _sysconfdir/pki/tls (#143392)
  - move CA directories to _sysconfdir/pki/CA
  - patch the CA script and the default config so it points to the
    CA directories


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-6
changelog:
  - use poll instead of select in rand (#128285)
  - fix Makefile.certificate to point to /etc/pki/tls
  - change the default string mask in ASN1 to PrintableString+UTF8String


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-7
changelog:
  - fix CAN-2005-0109 - use constant time/memory access mod_exp
    so bits of private key aren't leaked by cache eviction (#157631)
  - a few more fixes from upstream 0.9.7g


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-9
changelog:
  - add *.so.soversion as symlinks in /lib (#165264)
  - remove unpackaged symlinks (#159595)
  - fixes from upstream (constant time fixes for DSA,
    bn assembler div on ppc arch, initialize memory on realloc)


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-10
changelog:
  - fix CAN-2005-2969 - remove SSL_OP_MSIE_SSLV2_RSA_PADDING which
    disables the countermeasure against man in the middle attack in SSLv2
    (#169863)
  - use sha1 as default for CA and cert requests - CAN-2005-2946 (#169803)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8a-4
changelog:
  - fix build (-lcrypto was erroneusly dropped) of the updated libica
  - updated ICA engine to 1.3.6-rc3


author: Tomas Mraz <tmraz@redhat.com> - 0.9.8a-6
changelog:
  - fix stale open handles in libica (#177155)
  - fix build if 'rand' or 'passwd' in buildroot path (#178782)
  - initialize VIA Padlock engine (#186857)


author: Tomas Mraz <tmraz@redhat.com> - 0.9.8b-1
changelog:
  - upgrade to new version, stays ABI compatible
  - there is no more linux/config.h (it was empty anyway)


author: Tomas Mraz <tmraz@redhat.com>
changelog:
  - add ipv6 support to s_client and s_server (by Jan Pazdziora) (#198737)
  - add patches for BN threadsafety, AES cache collision attack hazard fix and
    pkcs7 code memleak fix from upstream CVS


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-7
changelog:
  - fix CVE-2006-2937 - mishandled error on ASN.1 parsing (#207276)
  - fix CVE-2006-2940 - parasitic public keys DoS (#207274)
  - fix CVE-2006-3738 - buffer overflow in SSL_get_shared_ciphers (#206940)
  - fix CVE-2006-4343 - sslv2 client DoS (#206940)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-13
changelog:
  - allow building on ARM architectures (#245417)
  - use reference timestamps to prevent multilib conflicts (#218064)
  - -devel package must require pkgconfig (#241031)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-14
changelog:
  - use localhost in testsuite, hopefully fixes slow build in koji
  - CVE-2007-3108 - fix side channel attack on private keys (#250577)
  - make ssl session cache id matching strict (#233599)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-16
changelog:
  - fix CVE-2007-5135 - off-by-one in SSL_get_shared_ciphers (#309801)
  - fix CVE-2007-4995 - out of order DTLS fragments buffer overflow (#321191)
  - add alpha sub-archs (#296031)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8g-2
changelog:
  - enable some new crypto algorithms and features
  - add some more important bug fixes from openssl CVS


author: Tomas Mraz <tmraz@redhat.com> 0.9.8g-3
changelog:
  - set default paths when no explicit paths are set (#418771)
  - do not add tls extensions to client hello for SSLv3 (#422081)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8g-9
changelog:
  - fix CVE-2008-0891 - server name extension crash (#448492)
  - fix CVE-2008-1672 - server key exchange message omit crash (#448495)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8j-1
changelog:
  - new upstream version with necessary soname bump (#455753)
  - temporarily provide symlink to old soname to make it possible to rebuild
    the dependent packages in rawhide
  - add eap-fast support (#428181)
  - add possibility to disable zlib by setting
  - add fips mode support for testing purposes
  - do not null dereference on some invalid smime files
  - add buildrequires pkgconfig (#479493)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8j-6
changelog:
  - drop the temporary triggerpostun and symlinking in post
  - fix the pkgconfig files and drop the unnecessary buildrequires
    on pkgconfig as it is a rpmbuild dependency (#481419)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8j-7
changelog:
  - must also verify checksum of libssl.so in the FIPS mode
  - obtain the seed for FIPS rng directly from the kernel device
  - drop the temporary symlinks


author: Tomas Mraz <tmraz@redhat.com> 0.9.8k-1
changelog:
  - update to new upstream release (minor bug fixes, security
    fixes and machine code optimizations only)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8k-6
changelog:
  - abort if selftests failed and random number generator is polled
  - mention EVP_aes and EVP_sha2xx routines in the manpages
  - add README.FIPS
  - make CA dir absolute path (#445344)
  - change default length for RSA key generation to 2048 (#484101)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.11.beta4
changelog:
  - update to new upstream version, no soname bump needed
  - fix CVE-2009-3555 - note that the fix is bypassed if SSL_OP_ALL is used
    so the compatibility with unfixed clients is not broken. The
    protocol extension is also not final.


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.12.beta4
changelog:
  - keep the beta status in version number at 3 so we do not have to rebuild
    openssh and possibly other dependencies with too strict version check


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.13.beta4
changelog:
  - disable enforcement of the renegotiation extension on the client (#537962)
  - add fixes from the current upstream snapshot


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.17.beta4
changelog:
  - upstream fix compression handling on session resumption
  - various null checks and other small fixes from upstream
  - upstream changes for the renegotiation info according to the latest draft


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.19.beta4
changelog:
  - fix CVE-2009-4355 - leak in applications incorrectly calling
    CRYPTO_free_all_ex_data() before application exit (#546707)
  - upstream fix for future TLS protocol version handling


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.21.beta5
changelog:
  - gracefully handle zero length in assembler implementations of
    OPENSSL_cleanse (#564029)
  - do not fail in s_server if client hostname not resolvable (#561260)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-2
changelog:
  - make CA dir readable - the private keys are in private subdir (#584810)
  - a few fixes from upstream CVS
  - make X509_NAME_hash_old work in FIPS mode (#568395)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-3
changelog:
  - fix wrong ASN.1 definition of OriginatorInfo - CVE-2010-0742 (#598738)
  - fix information leak in rsa_verify_recover - CVE-2010-1633 (#598732)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-7
changelog:
  - listen on ipv6 wildcard in s_server so we accept connections
    from both ipv4 and ipv6 (#601612)
  - fix openssl speed command so it can be used in the FIPS mode
    with FIPS allowed ciphers (#619762)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-8
changelog:
  - add -x931 parameter to openssl genrsa command to use the ANSI X9.31
    key generation method
  - use FIPS-186-3 method for DSA parameter generation
  - add OPENSSL_FIPS_NON_APPROVED_MD5_ALLOW environment variable
    to allow using MD5 when the system is in the maintenance state
    even if the /proc fips flag is on
  - make openssl pkcs12 command work by default in the FIPS mode


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-15
changelog:
  - better documentation of the available digests in apps (#693858)
  - backported CHIL engine fixes (#693863)
  - allow testing build without downstream patches (#708511)
  - enable partial RELRO when linking (#723994)
  - add intelx engine with improved performance on new Intel CPUs
  - add OPENSSL_DISABLE_AES_NI environment variable which disables
    the AES-NI support (does not affect the intelx engine)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-16
changelog:
  - merge the optimizations for AES-NI, SHA1, and RC4 from the intelx
    engine to the internal implementations


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-21
changelog:
  - fix for CVE-2011-4108 & CVE-2012-0050 - DTLS plaintext recovery
    vulnerability and additional DTLS fixes (#771770)
  - fix for CVE-2011-4576 - uninitialized SSL 3.0 padding (#771775)
  - fix for CVE-2011-4577 - possible DoS through malformed RFC 3779 data (#771778)
  - fix for CVE-2011-4619 - SGC restart DoS attack (#771780)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-23
changelog:
  - fix problem with the SGC restart patch that might terminate handshake
    incorrectly
  - fix for CVE-2012-0884 - MMA weakness in CMS and PKCS#7 code (#802725)
  - fix for CVE-2012-1165 - NULL read dereference on bad MIME headers (#802489)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-25
changelog:
  - fix for CVE-2012-2333 - improper checking for record length in DTLS (#820686)
  - properly initialize tkeylen in the CVE-2012-0884 fix


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-26
changelog:
  - use PKCS#8 when writing private keys in FIPS mode as the old
    PEM encryption mode is not FIPS compatible (#812348)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-27
changelog:
  - fix sslrand(1) and sslpasswd(1) reference in openssl(1) manpage (#841645)
  - drop superfluous lib64 fixup in pkgconfig .pc files (#770872)
  - force BIO_accept_new(*:<port-number>) to listen on IPv4


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-28
changelog:
  - fix for CVE-2013-0169 - SSL/TLS CBC timing attack (#907589)
  - fix for CVE-2013-0166 - DoS in OCSP signatures checking (#908052)
  - enable compression only if explicitly asked for or OPENSSL_DEFAULT_ZLIB
    environment variable is set (fixes CVE-2012-4929 #857051)
  - use __secure_getenv() everywhere instead of getenv() (#839735)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-15
changelog:
  - make DTLS1 work in FIPS mode
  - avoid RSA and DSA 512 bits and Whirlpool in 'openssl speed' in FIPS mode


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-21
changelog:
  - add DH_compute_key_padded needed for FIPS CAVS testing
  - make 3des strength to be 128 bits instead of 168 (#1056616)
  - FIPS mode: do not generate DSA keys and DH parameters < 2048 bits
  - FIPS mode: use approved RSA keygen (allows only 2048 and 3072 bit keys)
  - FIPS mode: add DH selftest
  - FIPS mode: reseed DRBG properly on RAND_add()
  - FIPS mode: add RSA encrypt/decrypt selftest
  - FIPS mode: add hard limit for 2^32 GCM block encryptions with the same key
  - use the key length from configuration file if req -newkey rsa is invoked


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-25
changelog:
  - fix CVE-2010-5298 - possible use of memory after free
  - fix CVE-2014-0195 - buffer overflow via invalid DTLS fragment
  - fix CVE-2014-0198 - possible NULL pointer dereference
  - fix CVE-2014-0221 - DoS from invalid DTLS handshake packet
  - fix CVE-2014-0224 - SSL/TLS MITM vulnerability
  - fix CVE-2014-3470 - client-side DoS when using anonymous ECDH


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-26
changelog:
  - drop EXPORT, RC2, and DES from the default cipher list (#1057520)
  - print ephemeral key size negotiated in TLS handshake (#1057715)
  - do not include ECC ciphersuites in SSLv2 client hello (#1090952)
  - properly detect encryption failure in BIO (#1100819)
  - fail on hmac integrity check if the .hmac file is empty (#1105567)
  - FIPS mode: make the limitations on DSA, DH, and RSA keygen
    length enforced only if OPENSSL_ENFORCE_MODULUS_BITS environment
    variable is set


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-29
changelog:
  - fix CVE-2014-3505 - doublefree in DTLS packet processing
  - fix CVE-2014-3506 - avoid memory exhaustion in DTLS
  - fix CVE-2014-3507 - avoid memory leak in DTLS
  - fix CVE-2014-3508 - fix OID handling to avoid information leak
  - fix CVE-2014-3509 - fix race condition when parsing server hello
  - fix CVE-2014-3510 - fix DoS in anonymous (EC)DH handling in DTLS
  - fix CVE-2014-3511 - disallow protocol downgrade via fragmentation


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-31
changelog:
  - fix CVE-2014-3567 - memory leak when handling session tickets
  - fix CVE-2014-3513 - memory leak in srtp support
  - add support for fallback SCSV to partially mitigate CVE-2014-3566
    (padding attack on SSL3)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-33
changelog:
  - fix CVE-2014-3570 - incorrect computation in BN_sqr()
  - fix CVE-2014-3571 - possible crash in dtls1_get_record()
  - fix CVE-2014-3572 - possible downgrade of ECDH ciphersuite to non-PFS state
  - fix CVE-2014-8275 - various certificate fingerprint issues
  - fix CVE-2015-0204 - remove support for RSA ephemeral keys for non-export
    ciphersuites and on server
  - fix CVE-2015-0205 - do not allow unauthenticated client DH certificate
  - fix CVE-2015-0206 - possible memory leak when buffering DTLS records


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-34
changelog:
  - copy digest algorithm when handling SNI context switch
  - improve documentation of ciphersuites - patch by Hubert Kario
  - add support for setting Kerberos service and keytab in
    s_server and s_client


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-35
changelog:
  - fix CVE-2015-0209 - potential use after free in d2i_ECPrivateKey()
  - fix CVE-2015-0286 - improper handling of ASN.1 boolean comparison
  - fix CVE-2015-0287 - ASN.1 structure reuse decoding memory corruption
  - fix CVE-2015-0288 - X509_to_X509_REQ NULL pointer dereference
  - fix CVE-2015-0289 - NULL dereference decoding invalid PKCS#7 data
  - fix CVE-2015-0292 - integer underflow in base64 decoder
  - fix CVE-2015-0293 - triggerable assert in SSLv2 server


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-37
changelog:
  - drop the AES-GCM restriction of 2^32 operations because the IV is
    always 96 bits (32 bit fixed field + 64 bit invocation field)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-38
changelog:
  - fix CVE-2015-4000 - prevent the logjam attack on client - restrict
    the DH key size to at least 768 bits (limit will be increased in future)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-39
changelog:
  - fix CVE-2015-3216 - regression in RAND locking that can cause segfaults on
    read in multithreaded applications


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-40
changelog:
  - fix CVE-2014-8176 - invalid free in DTLS buffering code
  - fix CVE-2015-1789 - out-of-bounds read in X509_cmp_time
  - fix CVE-2015-1790 - PKCS7 crash with missing EncryptedContent
  - fix CVE-2015-1791 - race condition handling NewSessionTicket
  - fix CVE-2015-1792 - CMS verify infinite loop with unknown hash function


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-41
changelog:
  - improved fix for CVE-2015-1791
  - add missing parts of CVE-2015-0209 fix for corectness although unexploitable


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-42.1
changelog:
  - fix CVE-2015-3194 - certificate verify crash with missing PSS parameter
  - fix CVE-2015-3195 - X509_ATTRIBUTE memory leak
  - fix CVE-2015-3196 - race condition when handling PSK identity hint


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-42.4
changelog:
  - fix CVE-2016-0702 - side channel attack on modular exponentiation
  - fix CVE-2016-0705 - double-free in DSA private key parsing
  - fix CVE-2016-0797 - heap corruption in BN_hex2bn and BN_dec2bn


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-1
changelog:
  - reenable optimizations on ppc64 and assembly code on ia64
  - upgrade to new upstream version (no soname bump needed)
  - disable thread test - it was testing the backport of the
    RSA blinding - no longer needed
  - added support for changing serial number to 
    Makefile.certificate (#151188)
  - make ca-bundle.crt a config file (#118903)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-9
changelog:
  - fix CVE-2007-3108 - side channel attack on private keys (#250581)
  - fix CVE-2007-5135 - off-by-one in SSL_get_shared_ciphers (#309881)
  - fix CVE-2007-4995 - out of order DTLS fragments buffer overflow (#321221)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-10
changelog:
  - compile with -march=z900 on s390 for performance improvements (#250818)
  - make ssl session ID matching strict (#233599)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-2
changelog:
  - more changes for FIPS validation (#444800)
  - correctly initialize default CA paths (#450987)
  - allow disabling zlib support through environment (#442624)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-5
changelog:
  - implement the integrity checking inside libcrypto so OpenSSL
    can be used in FIPS mode by the fipscheck library


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-8
changelog:
  - support multiple CRLs with same subject in a store (#457134)
  - fix CVE-2009-0590 - reject incorrectly encoded ASN.1 strings (#492304)
  - seed FIPS rng directly from kernel random device
  - do not require fipscheck to build the package (#475798)
  - call pairwise key tests in FIPS mode only (#479817)
  - do not crash when parsing bad mime data (#472440)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-12
changelog:
  - abort if selftests failed and random number generator is polled
  - mention EVP_aes and EVP_sha2xx routines in the manpages
  - add README.FIPS


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-13
changelog:
  - fix CVE-2009-2409 - drop MD2 algorithm from EVP tables (#510197)
  - fix CVE-2009-4355 - do not leak memory when CRYPTO_cleanup_all_ex_data()
    is called prematurely by application (#546707)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-14
changelog:
  - fix CVE-2009-3555 - support the safe renegotiation extension and
    do not allow legacy renegotiation on the server by default (#533125)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-15
changelog:
  - fix CVE-2010-0433 - do not pass NULL princ to krb5_kt_get_entry which
    in the RHEL-5 and newer versions will crash in such case (#569774)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-20.1
changelog:
  - fix CVE-2015-0293 - triggerable assert in SSLv2 server
  - fix CVE-2015-3197 - SSLv2 ciphersuite enforcement
  - disable SSLv2 in the generic TLS method


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.4-2
changelog:
  - Reference authors from the project AUTHORS file instead of listing in description
  - Change Source0 to reference the project's Mercurial repo
  - Cleaned up the summaries and descriptions
  - Incorporate the results of Fedora package self-review


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.4-3
changelog:
  - Include an AUTHORS and license file in each package
  - Change the library package name to pacemaker-libs to be more
    Fedora compliant
  - Remove execute permissions from xml related files
  - Reference the new cluster-glue devel package name
  - Update the tarball from upstream to version c9120a53a6ae
    + High: PE: Only prevent migration if the clone dependancy is stopping/starting on the target node
    + High: PE: Bug 2160 - Dont shuffle clones due to colocation
    + High: PE: New implementation of the resource migration (not stop/start) logic
    + Medium: Tools: crm_resource - Prevent use-of-NULL by requiring a resource name for the -A and -a options
    + Medium: PE: Prevent use-of-NULL in find_first_action()
    + Low: Build: Include licensing files


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-0.4.c9120a53a6ae.hg
changelog:
  - Incorporate the feedback from the cluster-glue review
  - Realistically, the version is a 1.0.5 pre-release
  - Use the global directive instead of define for variables
  - Use the haclient/hacluster group/user instead of daemon
  - Use the _configure macro
  - Fix install dependancies


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-1
changelog:
  - Add dependancy on resource-agents
  - Use the version of the configure macro that supplies --prefix, --libdir, etc
  - Update the tarball from upstream to version 462f1569a437 (Pacemaker 1.0.5 final)
    + High: Tools: crm_resource - Advertise --move instead of --migrate
    + Medium: Extra: New node connectivity RA that uses system ping and attrd_updater
    + Medium: crmd: Note that dc-deadtime can be used to mask the brokeness of some switches


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-2
changelog:
  - Add versioned perl dependancy as specified by
      https://fedoraproject.org/wiki/Packaging/Perl#Packages_that_link_to_libperl
  - No longer remove RPATH data, it prevents us finding libperl.so and no other
    libraries were being hardcoded
  - Compile in support for heartbeat
  - Conditionally add heartbeat-devel and corosynclib-devel to the -devel requirements
    depending on which stacks are supported


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-3
changelog:
  - Update the tarball from upstream to version 38cd629e5c3c
    + High: Core: Bug lf#2169 - Allow dtd/schema validation to be disabled
    + High: PE: Bug lf#2106 - Not all anonymous clone children are restarted after configuration change
    + High: PE: Bug lf#2170 - stop-all-resources option had no effect
    + High: PE: Bug lf#2171 - Prevent groups from starting if they depend on a complex resource which can't
    + High: PE: Disable resource management if stonith-enabled=true and no stonith resources are defined
    + High: PE: Don't include master score if it would prevent allocation
    + High: ais: Avoid excessive load by checking for dead children every 1s (instead of 100ms)
    + High: ais: Bug rh#525589 - Prevent shutdown deadlocks when running on CoroSync
    + High: ais: Gracefully handle changes to the AIS nodeid
    + High: crmd: Bug bnc#527530 - Wait for the transition to complete before leaving S_TRANSITION_ENGINE
    + High: crmd: Prevent use-after-free with LOG_DEBUG_3
    + Medium: xml: Mask the "symmetrical" attribute on rsc_colocation constraints (bnc#540672)
    + Medium (bnc#520707): Tools: crm: new templates ocfs2 and clvm
    + Medium: Build: Invert the disable ais/heartbeat logic so that --without (ais|heartbeat) is available to rpmbuild
    + Medium: PE: Bug lf#2178 - Indicate unmanaged clones
    + Medium: PE: Bug lf#2180 - Include node information for all failed ops
    + Medium: PE: Bug lf#2189 - Incorrect error message when unpacking simple ordering constraint
    + Medium: PE: Correctly log resources that would like to start but can't
    + Medium: PE: Stop ptest from logging to syslog
    + Medium: ais: Include version details in plugin name
    + Medium: crmd: Requery the resource metadata after every start operation


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-4
changelog:
  - Include the fixes from CoroSync integration testing
  - Move the resource templates - they're not documentation
  - Ensure documentation is placed in a standard location
  - Exclude documentation that is included elsewhere in the package

  - Update the tarball from upstream to version ee19d8e83c2a
    + High: cib: Correctly clean up when both plaintext and tls remote ports are requested
    + High: PE: Bug bnc#515172 - Provide better defaults for lt(e) and gt(e) comparisions
    + High: PE: Bug lf#2197 - Allow master instances placemaker to be influenced by colocation constraints
    + High: PE: Make sure promote/demote pseudo actions are created correctly
    + High: PE: Prevent target-role from promoting more than master-max instances
    + High: ais: Bug lf#2199 - Prevent expected-quorum-votes from being populated with garbage
    + High: ais: Prevent deadlock - dont try to release IPC message if the connection failed
    + High: cib: For validation errors, send back the full CIB so the client can display the errors
    + High: cib: Prevent use-after-free for remote plaintext connections
    + High: crmd: Bug lf#2201 - Prevent use-of-NULL when running heartbeat


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-6
changelog:
  - Let snmp automatically pull in lm_sensors-devel if required
    and available on that arch (its not on s390x)


author: Andrew Beekhof <andrew@beekhof.net> - 1.1.0-0.1-00d9bcac8775.hg
changelog:
  - Related: rhbz#rhbz#543948
  - Update the tarball from upstream to version 00d9bcac8775
    + High: PE: Bug 2213 - Ensure groups process location constraints so that clone-node-max works for cloned groups
    + High: PE: Bug lf#2153 - Update regression tests
    + High: PE: Bug lf#2153 - non-clones shouldn't restart when clones stop/start on other nodes
    + High: PE: Bug lf#2209 - Clone ordering should be able to prevent startup of dependant clones
    + High: PE: Bug lf#2216 - Correctly identify the state of anonymous clones when deciding when to probe
    + High: PE: Bug lf#2225 - Operations that require fencing should wait for 'stonith_complete' not 'all_stopped'.
    + High: PE: Bug lf#2225 - Prevent clone peers from stopping while another is instance is (potentially) being fenced
    + High: PE: Correctly anti-colocate with a group
    + High: PE: Correctly unpack ordering constraints for resource sets to avoid graph loops
    + High: Replace stonithd with the new fencing subsystem
    + High: cib: Ensure the loop searching for a remote login message terminates
    + High: cib: Finally fix reliability of receiving large messages over remote plaintext connections
    + High: cib: Fix remote notifications
    + High: cib: For remote connections, default to CRM_DAEMON_USER since thats the only one that the cib can validate the password for using PAM
    + High: cib: Remote plaintext - Retry sending parts of the message that didn't fit the first time
    + Medium: PE: Bug lf#2206 - rsc_order constraints always use score at the top level
    + Medium: PE: Provide a default action for resource-set ordering
    + Medium: PE: Silently fix requires=fencing for stonith resources so that it can be set in op_defaults
    + Medium: ais: Some clients such as gfs_controld want a cluster name, allow one to be specified in corosync.conf
    + Medium: cib: Create valid notification control messages
    + Medium: cib: Indicate where the remote connection came from
    + Medium: cib: Send password prompt to stderr so that stdout can be redirected
    + Medium: extra: Add the daemon parameter to the controld metadata
    + Medium: fencing: Re-engineer the stonith daemon to support RHCS agents
    + Medium: tools: Make crm_mon functional with remote connections
    + Medium: xml: Bug bnc#552713 - Treat node unames as text fields not IDs
    + Medium: xml: Bug lf#2215 - Create an always-true expression for empty rules when upgrading from 0.6


author: Andrew Beekhof <andrew@beekhof.net> - 1.1.0-1
changelog:
  - Related: rhbz#543948
  - Update the tarball from upstream to version 07ab245be519
    + High: crmd: Always connect to stonith
    + High: crmd: Ensure batch-limit is correctly enforced
    + High: crmd: Ensure we have the latest status after a transition abort
    + High: Fencing: Overhaul the fencing daemon
    + High: PE: Bug lf#2153 - non-clones shouldn't restart when clones stop/start on other nodes - improved
    + Medium: PE: Allow resource sets to be reused between ordering and colocation constraints
    + Medium: PE: Implement serializing order constraints that dont cause restarts or inhibit migration
    + Medium: PE: Include node attributes for the node to be fenced
    + Medium: PE: Make crm_simulate a full replacement for ptest
    + Medium: PE: Only complain about target-role=master for non m/s resources
    + Medium: PE: Prevent non-multistate resources from being promoted through target-role
    + Medium: PE: Simplify the rsc_order syntax - don't make funky inferences based on score
    + Medium: PE: Support serialized sets of resources
    + Medium: Tools: Bug lf#2286 - Allow the shell to accept template parameters on the command line
    + Medium: Tools: Bug lf#2307 - Provide a way to determin the nodeid of past cluster members
    + Medium: Tools: crm: add update method to template apply (LF 2289)
    + Medium: Tools: crm: direct RA interface for stonith class resource agents (LF 2270)
    + Medium: Tools: crm: don't remove sets which contain id-ref attribute (LF 2304)
    + Medium: Tools: crm: exclude locations when testing for pathological constraints (LF 2300)
    + Medium: Tools: crm: fix exit code on single shot commands
    + Medium: Tools: crm: fix node delete (LF 2305)
    + Medium: Tools: crm: implement -F (--force) option
    + Medium: Tools: crm: rename status to cibstatus (LF 2236)
    + Medium: Tools: crm: stay in crm if user specified level only (LF 2286)


author: Andrew Beekhof <andrew@beekhof.net> - 1.1.1-1
changelog:
  - Resolves: rhbz#559868
  - Split off the doc package as it has grown quite large
  - Split off the cluster test suite (CTS) so that it can be used by other projects
  - Update the tarball from upstream to version 46e288ab9014
    + High: PE: Repair handling of unordered groups in RHS ordering constraints
    + High: Agents: Prevent shell expansion of '*' when there are files in /var/lib/heartbeat/cores/root
    + High: ais: Bug lf#2340 - Force rogue child processes to terminate after waiting 2.5 minutes
    + High: ais: Bug lf#2359 - Default expected votes to 2 inside Corosync/OpenAIS plugin
    + High: ais: Bug lf#2359 - expected-quorum-votes not correctly updated after membership change
    + High: ais: Bug rhbz#525552 - Move non-threadsafe calls to setenv() to after the fork()
    + High: crmd: Bug bnc#578644 - Improve handling of cancelled operations caused by resource cleanup
    + High: crmd: Make sure we wait for fencing to complete before continuing
    + High: crmd: Prevent use-of-NULL when non-DCs get stonith callbacks
    + High: Fencing: Account for stonith_get_info() always returning a pointer to the same static buffer
    + High: Fencing: Bug bnc#577007 - Correctly parse the hostlist output from stonith agents
    + High: Fencing: Correctly parse arg maps and do not return a provider for unknown agents
    + High: fencing: Fix can_fence_host_with_device() logic and improve hostlist output parsing
    + High: PE: Bug lf#2358 - Fix master-master anti-colocation
    + High: PE: Correctly implement optional colocation between primitives and clone resources
    + High: PE: Suppress duplicate ordering constraints to achieve orders of magnitude speed increases for large clusters
    + High: Shell: move scores from resource sets to the constraint element (lf#2331)
    + High: Shell: recovery from bad/outdated help index file
    + Medium: Shell: implement lifetime for rsc migrate and node standby (lf#2353)
    + Medium: Shell: node attributes update in configure (bnc#582767)


author: Andrew Beekhof <andrew@beekhof.net> 1.1.2-2
changelog:
  - Do not build on ppc and ppc64.
    Resolves: rhbz#590992
  - Rebase on new upstream release
    + High: ais: Do not count votes from offline nodes and calculate current votes before sending quorum data
    + High: ais: Ensure the list of active processes sent to clients is always up-to-date
    + High: ais: Look for the correct conf variable for turning on file logging
    + High: ais: Use the threadsafe version of getpwnam
    + High: Core: Bug lf#2414 - Prevent use-after-free reported by valgrind when doing xpath based deletions
    + High: Core: fix memory leaks exposed by valgrind
    + High: crmd: Bug 2401 - Improved detection of partially active peers
    + High: crmd: Bug lf#2379 - Ensure the cluster terminates when the PE is not available
    + High: crmd: Bug lf#2414 - Prevent use-after-free of the PE connection after it dies
    + High: crmd: Bug lf#2414 - Prevent use-after-free of the stonith-ng connection
    + High: crmd: Do not allow the target_rc to be misused by resource agents
    + High: crmd: Do not ignore action timeouts based on FSA state
    + High: crmd: Ensure we dont get stuck in S_PENDING if we loose an election to someone that never talks to us again
    + High: crmd: Fix memory leaks exposed by valgrind
    + High: crmd: Remove race condition that could lead to multiple instances of a clone being active on a machine
    + High: crmd: Send erase_status_tag() calls to the local CIB when the DC is fenced, since there is no DC to accept them
    + High: crmd: Use global fencing notifications to prevent secondary fencing operations of the DC
    + High: PE: Bug lf#2317 - Avoid needless restart of primitive depending on a clone
    + High: PE: Bug lf#2361 - Ensure clones observe mandatory ordering constraints if the LHS is unrunnable
    + High: PE: Bug lf#2383 - Combine failcounts for all instances of an anonymous clone on a host
    + High: PE: Bug lf#2384 - Fix intra-set colocation and ordering
    + High: PE: Bug lf#2403 - Enforce mandatory promotion (colocation) constraints
    + High: PE: Bug lf#2412 - Correctly locate clone instances by their prefix
    + High: PE: Don ot be so quick to pull the trigger on nodes that are coming up
    + High: PE: Fix memory leaks exposed by valgrind
    + High: PE: Repair handling of unordered groups in RHS ordering constraints
    + High: PE: Rewrite native_merge_weights() to avoid Fix use-after-free
    + High: Shell: always reload status if working with the cluster (bnc#590035)
    + High: Shell: check timeouts also against the default-action-timeout property
    + High: Shell: Default to using the status section from the live CIB (bnc#592762)
    + High: Shell: edit multiple meta_attributes sets in resource management (lf#2315)
    + High: Shell: enable comments (lf#2221)
    + High: Tools: crm_mon - fix memory leaks exposed by valgrind


author: Andrew Beekhof <andrew@beekhof.net> 1.1.2-3
changelog:
  - Resolves: rhbz#590667
  - Rebase on new upstream release
    + High: Core: Bug lf#2401 - Backed out changeset 6e6980376f01


author: Andrew Beekhof <andrew@beekhof.net> 1.1.2-5
changelog:
  - Resolves: rhbz#594296 - rpmdiff checks
    + Remove legacy scripts
    + Add missing man pages
    + Fix sub-package version requires


author: Andrew Beekhof <andrew@beekhof.net> 1.1.2-6
changelog:
  - Resolves: rhbz#610815 - add cman support
    + High: cib: Also free query result for xpath operations that return more than one hit
    + High: cib: Fix the application of unversioned diffs
    + High: Core: Correctly unpack HA_Messages containing multiple entries with the same name
    + High: Core: Resolve coverity RESOURCE_LEAK defects
    + High: crmd: All nodes should see status updates, not just he DC
    + High: crmd: Allow non-DC nodes to clear failcounts too
    + High: crmd: Base DC election on process relative uptime
    + High: crmd: Make sure the membership cache is accurate after a sucessful fencing operation
    + High: crmd: Make sure we always poke the FSA after a transition to clear any TE_HALT actions
    + High: crmd: Prevent segmentation fault
    + High: PE: Avoid creating invalid ordering constraints for probes that are not needed
    + High: PE: Bug lf#1959 - Fail unmanaged resources should not prevent other services from shutting down
    + High: PE: Bug lf#2422 - Ordering dependencies on partially active groups not observed properly
    + High: PE: Bug lf#2424 - Use notify oepration definition if it exists in the configuration
    + High: PE: Bug lf#2433 - No services should be stopped until probes finish
    + High: PE: Correctly detect when there is a real failcount that expired and needs to be cleared
    + High: PE: Correctly handle pseudo action creation
    + High: PE: Fix colocation for interleaved clones
    + High: PE: Fix colocation with partially active groups
    + High: PE: Fix potential use-after-free defect from coverity
    + High: PE: Fix use-after-free in order_actions() reported by valgrind
    + High: PE: Prevent endless loop when looking for operation definitions in the configuration
    + High: stonith: Correctly parse pcmk_host_list parameters that appear on a single line
    + High: tools: crm_simulate - Resolve coverity USE_AFTER_FREE defect


author: Andrew Beekhof <andrew@beekhof.net> 1.1.2-7
changelog:
  - Resolves: rhbz#610815 - add cman support
    + High: ais: Use service slot 10 to avoid conflicting with cman


author: Andrew Beekhof <andrew@beekhof.net> 1.1.4-1
changelog:
  - Resolves: rhbz#668466
  - Update tarball to upstream version: 3ac6ac993d6d
    + Performance improvements for larger clusters
    + Miscellaneous bug fixes


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.5-1
changelog:
  - Fix rpmlint warnings
  - Rebase on new upstream release
    See included ChangeLog file or http://hg.clusterlabs.org/pacemaker/1.1/file/tip/ChangeLog for details
    + Bugs lf#2445, lf#2493, lf#2508, lf#2518, lf#2527, lf#2544,
           lf#2545, lf#2550, lf#2551, lf#2554, lf#2558, bnc#665131
  - Resolves: rhbz#676286 - Add per device 'diag' option to pacemaker stonith action


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.5-2
changelog:
  - Fix cman integration
  - Resolves: rhbz#684838 - Correctly notify fenced of a successful fencing event
  - Resolves: rhbz#684825 - Ensure Pacemaker uses the most recent membership/quorum information


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.5-6
changelog:
  - Update tarball to upstream version: b933cbea41b5
  - Resolves: rhbz#708797
  - Resolves: rhbz#451848
  - Resolves: rhbz#708722
  - Resolves: rhbz#720136


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.6-1
changelog:
  - Update tarball to upstream version: a02c0f1
    See included ChangeLog file or, for full details:
      https://github.com/ClusterLabs/pacemaker/compare/a12de08...a02c0f1
  - Do not build in support for snmp, esmtp by default
  - Create a package for cluster unaware libraries to minimze our footprint
    on non-cluster nodes
  - Better subpackage descriptions
  - Resolves: rhbz#743175


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.7-1
changelog:
  - Update tarball to upstream version: 148fccf
    See included ChangeLog file or, for full details:
      https://github.com/ClusterLabs/pacemaker/compare/148fccf...a12de08
  - Add libqb-devel as a build dependancy
  - Resolves: rhbz#782255 rhbz#754216 rhbz#729035
  - Related:  rhbz#790627


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.7-2
changelog:
  - Update patch level to upstream version: c26e624
  - Resolves: rhbz#720214 rhbz#720218 rhbz#754216 rhbz#789397
    For full details, see:
      https://github.com/ClusterLabs/pacemaker/compare/c26e624...148fccf


author: David Vossel <dvossel@redhat.com> - 1.1.7-3
changelog:
  - Add libqb-devel as a dependancy of pacemaker-libs-devel
  - Medium: PE: Report resources as active in correct data about resource location
    Resolves:  rhbz#799070
  - Low: Tools: Bug rhbz#801351 - Fix crm_report help text
    Resolves: rhbz#801351


author: David Vossel <dvossel@redhat.com> - 1.1.7-5
changelog:
  - Use default value for HB_DAEMON_DIR define when clusterglue does not provide one.
    Resolves: rhbz#808557


author: Andrew Beekhof <andrew@beekhof.net> 1.1.8-1
changelog:
  - Rebuild for upstream 1.1.8 release
  - Resolves: rhbz#816875

  - See included ChangeLog file or https://raw.github.com/ClusterLabs/pacemaker/master/ChangeLog for full details

    + New IPC implementation from libqb
    + New logging implementation from libqb
    + Quieter - info, debug and trace logs are no longer sent to syslog
    + Dropped dependancy on cluster-glue
    + Config and core directories no longer located in heartbeat directories
    + Support for managing systemd services
    + Rewritten local resource management daemon
    + Version bumps for every shared library due to API cleanups
    + Removes crm shell, install/use pcs shell and GUI instead


author: Andrew Beekhof <andrew@beekhof.net> 1.1.8-2
changelog:
  - Fix internal package dependancies
  - Resolves: rhbz#816875

  - Update to upstream 0b45588
    + Correctly disable syslog output when requested
    + Warn about node names containing a capital letter
    + Do not start fencing until entire device topology is found or query results timeout.
    + Allow nodes to use a name other than uname()


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.8-4
changelog:
  - Resolves: rhbz#816875
  - Update to upstream db9410b

    + Cluster: Detect node name collisions in corosync
    + Cluster: Strip domains from node names by default
    + Core: Prevent ordering changes when applying xml diffs
    + Fencing: On failure, only try a topology device once from the remote level.
    + Fencing: Retry stonith device for duration of action's timeout period.
    + Fencing: Support 'on_target' option in fencing device metadata for forcing unfence on target node
    + mcp: Re-attach to existing pacemaker components when mcp fails
    + pengine: Bug cl#5101 - Ensure stop order is preserved for partially active groups
    + pengine: Bug cl#5111 - When clone/master child rsc has on-fail=stop, insure all children stop on failure.
    + pengine: Correctly unpack active anonymous clones
    + pengine: Support a 'requires' resource meta-attribute for controlling whether it needs quorum, fencing or nothing
    + pengine: Support resources that require unfencing before start


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.8-5
changelog:
  - Resolves: rhbz#877364
  - Update to upstream e69dfc1

    + attrd: Correctly handle deletion of non-existant attributes
    + cib: Do not pass local variables to mainloop_add_fd() when creating remote connections
    + Cluster: Do not strip the domain from node names calculated from uname(2)
    + Core: Supply the correct number of arguments for the format string
    + corosync: Avoid errors when closing failed connections
    + fencing: Automatically append 'nodeid' to fencing agent args if it is detected agent supports 'nodeid' parameter
    + mcp: chmod the correct directory instead of /var/run
    + pengine: Prevent double-free for cloned primitive from template


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.8-6
changelog:
  - Resolves: rhbz#877364
  - Update to upstream d20d06f

    + cib: Avoid use-after-free by correctly support cib_no_children for non-xpath queries
    + cib: Remove text nodes from cib replace operations
    + Cluster: Preserve corosync membership state when matching node name/id entries
    + cman: Do not wait for unmanaged resources during shutdown
    + cman: Ensure reliable shutdown
    + cman: Ignore qdisk 'nodes'
    + Core: Prevent use-of_NULL in IPC code
    + corosync: Ensure peer state is preserved when matching names to nodeids
    + crmd: Avoid filling the ipc queue with data we don't need
    + crmd: Prevent election storms caused by getrusage() values being too close
    + Fencing: Correctly terminate when all device options have been exhausted
    + Fencing: Record delegated self-fencing operations in case they fail
    + legacy: Re-enable logging from the pacemaker plugin
    + pengine: Bug rhbz#880249 - Ensure orphan masters are demoted before being stopped
    + pengine: Bug rhbz#880249 - Teach the PE how to recover masters into primitives
    + pengine: Ensure previous migrations are completed before attempting another one
    + tools: crm_report - Fix node list detection


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.8-7
changelog:
  - Resolves: rhbz#880249
  - Update to upstream ca7bf5e

    + Fencing: Only try peers for non-topology based operations once
    + tools: Have crm_resource generate a valid transition key when sending resource commands to the crmd


author: Andrew Beekhof <andrew@beekhof.net> 1.1.10-1
changelog:
  - Update source tarball to revision: Pacemaker-1.1.10
  - See included ChangeLog file or https://raw.github.com/ClusterLabs/pacemaker/master/ChangeLog for full details

  - Resolves: rhbz#891766
  - Resolves: rhbz#902407
  - Resolves: rhbz#908450
  - Resolves: rhbz#913093
  - Resolves: rhbz#951340
  - Resolves: rhbz#951371
  - Related: rhbz#987355


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-3
changelog:
  + Fix: pengine: Do not restart resources that depend on unmanaged resources
    + Fix: crmd: Prevent recurring monitors being cancelled due to notify operations


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-4
changelog:
  + Fix: crmd: Prevent crash by passing log arguments in the correct order
    + Fix: pengine: Do not re-allocate clone instances that are blocked in the Stopped state
    + Fix: pengine: Do not allow colocation with blocked clone instances


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-5
changelog:
  + Fix: systemd: Prevent glib assertion - only call g_error_free with non-NULL arguments
    + Fix: systemd: Prevent additional use-of-NULL assertions in g_error_free
    + Fix: logging: glib CRIT messages should not produce core files in the background
    + Fix: crmd: Correcty update the history cache when recurring ops change their return code
    + Log: crm_mon: Unmangle the output for failed operations
    + Log: cib: Correctly log short-form xml diffs
    + Log: pengine: Better indicate when a resource has failed


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-7
changelog:
  + Fencing: Support agents that need the host to be unfenced at startup
      Resolves: rhbz#996850
    + Fix: crm_report: Collect corosync quorum data
      Resolves: rhbz#989292


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-8
changelog:
  + Fix: mcp: Remove LSB hints that instruct chkconfig to start pacemaker at boot time
      Resolves: rhbz#997346


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-9
changelog:
  + Fix: xml: Location constraints are allowed to specify a role
    + Bug rhbz#902407 - crm_resource: Handle --ban for master/slave resources as advertised
      Resolves: rhbz#902407


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-10
changelog:
  - Remove unsupported resource agent
      Resolves: rhbz#1005678
  - Provide a meaningful error if --master is used for primitives and groups


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-11
changelog:
  + Fix: cman: Do not start pacemaker if cman startup fails
    + Fix: Fencing: Observe pcmk_host_list during automatic unfencing
      Resolves: rhbz#996850


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-12
changelog:
  - Fix: Consistently use 'Slave' as the role for unpromoted master/slave resources
      Resolves: rhbz#1011618
  - Fix: pengine: Location constraints with role=Started should prevent masters from running at all
      Resolves: rhbz#902407
  - Fix: crm_resource: Observe --master modifier for --move
      Resolves: rhbz#902407


author: Andrew Beekhof <beekhof@redhat.com> - 1.1.10-14
changelog:
  - Log: crmd: Supply arguments in the correct order
      Resolves: rhbz#996850
  - Fix: Invalid formatting of log message causes crash
      Resolves: rhbz#996850


author: David Vossel <dvossel@redhat.com> - 1.1.10-15
changelog:
  - Fix: Removes unnecessary newlines in crm_resource -O output
      Resolves: rhbz#1038155
  - Fix: lrmd: Correctly cancel monitor actions for lsb/systemd/service resources on cleaning up (cherry picked from commit 1c14b9d69470ff56fd814091867394cd0a1cf61d)
      Resolves: rhbz#1046131
  - Fix: services: Fixes segfault associated with cancelling in-flight recurring operations.
      Resolves: rhbz#1046131


author: David Vossel <dvossel@redhat.com> - 1.1.10-16
changelog:
  - Fix: pengine: fixes invalid transition caused by clones with more than 10 instances
      Resolves: rhbz#1078954


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.12-1
changelog:
  - Update to upstream release 1.1.12-rc3
  - The CIB has O(2) better performance and updates are applied with greater reliablity
  - Transient attributes are now recorded in a truely atomic manner
  - Supports fencing agents that need the host to be unfenced at startup
  - CIB ACLs have been reimplemented and are now enabled 
  - Various bugs squashed

  - Resolves: rhbz#1020210 rhbz#1036631 rhbz#1069279
  - Resolves: rhbz#1069795 rhbz#1071995


author: Andrew Beekhof <beekhof@redhat.com> - 1.1.12-2
changelog:
  - Bug rhbz#1054307 - cname pattern match should be more restrictive in init script
      Resolves: rhbz#1054307


author: Andrew Beekhof <beekhof@redhat.com> - 1.1.12-3
changelog:
  - Fix: crmd: avoid double free caused by nested hash table removal
  - Fix: ignore SIGPIPE with gnutls is in use
  - Fix: cib: cl#5222 - Prevent assert in xml_calculate_changes() on performing cib operations
      Resolves: rhbz#1071995


author: David Vossel <dvossel@redhat.com> - 1.1.12-5
changelog:
  - Properly clear shutdown transient attribute after node leaves
    membership.

    Resolves: rhbz#1198638


author: David Vossel <dvossel@redhat.com> - 1.1.12-6
changelog:
  - Fixes invalid free in attrd
  - Fixes crm_mon -E option for external script.
  - Fixes acl read-only access role assignment.

    Resolves: rhbz#1205292
    Resolves: rhbz#1208896
    Resolves: rhbz#1207621


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.12-7
changelog:
  - Ensure relevant components clear cache entries are cleared when peers leave the cluster

    Resolves: rhbz#1193499


author: David Vossel <dvossel@redhat.com> - 1.1.12-8
changelog:
  - Reduce log severity for style upgrade notice.
   - Properly export pacemaker related sysconfig variables
   - Remove warning during yum update of pacemaker packages.

    Resolves: rhbz#1163982
    Resolves: rhbz#1177821
    Resolves: rhbz#1210291


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - changed /dev/cdrom default user permissions back to 0600 in console.perms
    because some cdrom players open O_RDWR.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - fixed glob/regexp confusion in pam_console, added kbd and fixed fb devices
  - added pam_xauth module


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - many bug fixes in pam_xauth
  - pam_console can now handle broken applications that do not set
    the PAM_TTY item.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 0.72
  - fix pam_unix password-changing bug
  - fix pam_unix's cracklib support
  - change package URL


author: Elliot Lee <sopwith@redhat.com>
changelog:
  - Add a patch to accept 'pts/N' in /etc/securetty as a match for tty '5'
    (which is what other pieces of the system think it is). Fixes bug #7641.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Add new pam_stack module.
  - Install pwdb_chkpwd and unix_chkpwd as the current user for non-root builds


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add system-auth control file
  - let gethostname() call in pam_access.c be implicitly declared to avoid
    conflicting types if unistd.c declares it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add account management wrappers for pam_listfile, pam_nologin, pam_securetty,
    pam_shells, and pam_wheel


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - symlink libpam.so to libpam.so.%{version}, and likewise for libpam_misc
  - reverse order of checks in _unix_getpwnam for pam_unix


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix installation of pam_xauth man pages (#12417)
  - forcibly strip helpers (#12430)
  - try to make pam_console a little more discriminating


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make pam_console's extra checks disableable
  - simplify extra check to just check if the device owner is root
  - add a debug log when pam_stack comes across a NULL item
  - have pam_stack hand items up to the parent from the child


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - need to make pam_console's checking a little stronger
  - only pass data up from pam_stack if the parent didn't already define it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add a broken_shadow option to pam_unix
  - add all module README files to the documentation list (#16456)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move pam_filter modules to /lib/security/pam_filter (#16111)
  - add pam_tally's application to allow counts to be reset (#16456)
  - move README files to the txts subdirectory


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - give users /dev/cdrom* instead of /dev/cdrom in console.perms (#16768)
  - add nvidia control files to console.perms


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix problems when looking for headers in /usr/include (#17236)
  - clean up a couple of compile warnings


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - modify the files list to make sure #16456 stays fixed
  - make pam_stack track PAM_AUTHTOK and PAM_OLDAUTHTOK items
  - add pam_chroot module
  - self-hosting fixes from the -devel split
  - update generated docs in the tree


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - patch from Dmitry V. Levin to have pam_stack propagate the PAM fail_delay
  - roll back the README for pam_xauth to actually be the right one
  - tweak pam_stack to use the parent's service name when calling the substack


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - tweak pre script to be called in all upgrade cases
  - get pam_unix to only care about the significant pieces of passwords it checks
  - add /usr/include/db1/db.h as a build prereq to pull in the right include
    files, no matter whether they're in glibc-devel or db1-devel
  - pam_userdb.c: include db1/db.h instead of db.h


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add RLIMIT_LOCKS to pam_limits (patch from Jes Sorensen) (#20542)
  - link pam_userdb to Berkeley DB 2.x to match 6.2's setup correctly


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix similar() function in pam_cracklib (#14740)
  - fix example in access.conf (#21467)
  - add conditional compilation for building for 6.2 (for pam_userdb)
  - tweak post to not use USESHADOW any more


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix handling of "nis" when changing passwords by adding the checks for the
    data source to the password-updating module in pam_unix
  - add the original copyright for pam_access (fix from Michael Gerdts)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - merge to 0.74
  - make console.perms match perms set by MAKEDEV, and add some devfs device names
  - add 'sed' to the buildprereq list (#24666)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - actually time out when attempting to lckpwdf() (#25889)
  - include time.h in pam_issue (#25923)
  - update the default system-auth to the one generated by authconfig 4.1.1
  - handle getpw??? and getgr??? failures more gracefully (#26115)
  - get rid of some extraneous {set,end}{pw,gr}ent() calls


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_limits: change the documented default config file to reflect the defaults
  - pam_limits: you should be able to log in a total of maxlogins times, not
    (maxlogins - 1)
  - handle group limits on maxlogins correctly (#25690)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - own /etc/security
  - be more descriptive when logging messages from pam_limits
  - pam_listfile: remove some debugging code (#28346)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add pam_console_apply
  - /dev/pilot's usually a serial port (or a USB serial port), so revert its
    group to 'uucp' instead of 'tty' in console.perms
  - change pam_console's behavior wrt directories -- directories which are
    mount points according to /etc/fstab are taken to be synonymous with
    their device special nodes, and directories which are not mount points
    are ignored


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_console: error out on undefined classes in pam_console config file
  - console.perms: actually change the permissions on the new device classes
  - pam_console: add an fstab= argument, and -f and -c flags to pam_console_apply
  - pam_console: use g_log instead of g_critical when bailing out
  - console.perms: logins on /dev/vc/* are also console logins, from Douglas
    Gilbert via Tim Waugh


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_wheel: make 'trust' and 'deny' work together correctly
  - pam_wheel: also check the user's primary gid
  - pam_group: also initialize groups when called with PAM_REINITIALIZE_CRED


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - remove /dev/dri from console.perms -- XFree86 munges it, so it's outside of
    our control (reminder from Daryll Strauss)
  - add /dev/3dfx to console.perms


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - merge up to 0.75
  - pam_unix: temporarily ignore SIGCHLD while running the helper
  - pam_pwdb: temporarily ignore SIGCHLD while running the helper
  - pam_dispatch: default to uncached behavior if the cached chain is empty


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_access: compare IP addresses with the terminating ".", as documented
    (patch from Carlo Marcelo Arenas Belon, I think) (#16505)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - console.perms: add apm_bios to the list of devices the console owner can use
  - console.perms: add beep to the list of sound devices


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - console.perms: change js* to js[0-9]*
  - include pam_aconf.h in more modules (patches from Harald Welte)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_console: fix logic bug when changing permissions on single
    file and/or lists of files
  - pam_console: return the proper error code (reported and patches
    for both from Frederic Crozat)
  - change deprecated Copyright: tag in .spec file to License:


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_wheel: don't error out if the group has no members, but is the user's
    primary GID (reported by David Vos)
  - pam_unix: preserve permissions on files which are manipulated (#43706)
  - pam_securetty: check if the user is the superuser before checking the tty,
    thereby allowing regular users access to services which don't set the
    PAM_TTY item (#39247)
  - pam_access: define NIS and link with libnsl (#36864)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_console: use /var/run/console instead of /var/lock/console for lock files
  - pam_issue: read the right number of bytes from the file


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-10
changelog:
  - pam_xauth: fix errors due to uninitialized data structure (fix from Tse Huong
    Choo)
  - pam_xauth: random cleanups
  - pam_console: use /var/run/console instead of /var/lock/console at install-time
  - pam_unix: fix preserving of permissions on files which are manipulated


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_stack: perform deep copy of conversation structures
  - include the static libpam in the -devel subpackage (#52321)
  - move development .so and .a files to %{_libdir}
  - pam_unix: don't barf on empty passwords (#51846)
  - pam_unix: redo compatibility with "hash,age" data wrt bigcrypt (#42394)
  - console.perms: add usb camera, scanner, and rio devices (#15528)
  - pam_cracklib: initialize all options properly (#49613)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - modules: use getpwnam_r and friends instead of non-reentrant versions
  - pam_console: clear generated .c and .h files in "clean" makefile target


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-12
changelog:
  - noreplace configuration files in /etc/security
  - pam_console: update pam_console_apply and man pages to reflect
    /var/lock -> /var/run move


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_unix: use crypt() instead of bigcrypt() when salted field is less than
    the critical size which lets us know it was generated with bigcrypt()
  - use a wrapper to handle ERANGE errors when calling get....._r functions:
    defining PAM_GETPWNAM_R and such (for getpwnam, getpwuid, getgrnam,
    getgrgid, and getspnam) before including _pam_macros.h will cause them
    to be implemented as static functions, similar to how defining PAM_SM_xxx
    is used to control whether or not PAM declares prototypes for certain
    functions


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_userdb: fix the key_only flag so that the null-terminator of the
    user-password string isn't expected to be part of the key in the db file,
    matching the behavior of db_load 3.2.9


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_xauth: rewrite to skip refcounting and just use a temporary file
    created using mkstemp() in /tmp


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_xauth: close a possible DoS due to use of dotlock-style locking in
    world-writable directories by relocating the temporary file to the target
    user's home directory
  - general: include headers local to this tree using relative paths so that
    system headers for PAM won't be pulled in, in case include paths don't
    take care of it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add cracklib as a buildprereq
  - pam_wheel: don't ignore out if the user is attempting to switch to a
    unprivileged user (this lets pam_wheel do its thing when users attempt
    to get to system accounts or accounts of other unprivileged users)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_mkhomedir: recurse into subdirectories properly
  - pam_mkhomedir: handle symlinks
  - pam_mkhomedir: skip over special items in the skeleton directory


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_limits: don't just return if the user is root -- we'll want to set the
    priority (it could be negative to elevate root's sessions)
  - pam_issue: fix off-by-one error allocating space for the prompt string


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_tally: don't try to read past the end of faillog -- it probably contains
    garbage, which if written into the file later on will confuse /usr/bin/faillog


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_rhosts: allow "+hostname" as a synonym for "hostname" to jive better
    with the hosts.equiv(5) man page
  - use the automake install-sh instead of the autoconf install-sh, which
    disappeared somewhere between 2.50 and now


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-15
changelog:
  - reorder patches so that the reentrancy patch is applied last -- we never
    came to a consensus on how to guard against the bugs in calling applications
    which this sort of change addresses, and having them last allows for dropping
    in a better strategy for addressing this later on


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-16
changelog:
  - pam_xauth: always return PAM_SUCCESS or PAM_SESSION_ERR instead of PAM_IGNORE,
    matching the previous behavior (libpam treats PAM_IGNORE from a single module
    in a stack as a session error, leading to false error messages if we just
    return PAM_IGNORE for all cases)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-19
changelog:
  - fix a bug in the getpwnam_r wrapper which sometimes resulted in false
    positives for non-existent users


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-20
changelog:
  - pam_stack: fix some memory leaks (reported by Fernando Trias)
  - pam_chroot: integrate Owl patch to report the more common causes of failures


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-31
changelog:
  - libpam_misc: fix possible infinite loop in misc_conv (#62195)
  - pam_xauth: fix cases where DISPLAY is "localhost:screen" and the xauth
    key is actually stored using the system's hostname (#61524)


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-36
changelog:
  - pam_timestamp: chown intermediate directories when creating them
  - pam_timestamp_check: add -d flag to poll


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-40
changelog:
  - pam_timestamp_check: check that stdio descriptors are open before we're
    invoked
  - add missing chroot.conf


author: Elliot Lee <sopwith@redhat.com> 0.75-42
changelog:
  - Since cracklib-dicts location will not be correctly detected without 
    that package being installed, add buildreq for cracklib-dicts.
  - Add patch57: makes configure use $LIBNAME when searching for cracklib 
    dicts, and error out if not found.


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-44
changelog:
  - fix syntax errors in pam_console's yacc parser which newer bison chokes on
  - forcibly set FAKEROOT at make install time


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-45
changelog:
  - create /lib/security, even if it isn't /%{_lib}/security, because we
    can't locate /lib/security/$ISA without it (noted by Arnd Bergmann)
  - clear out the duplicate docs directory created during %install


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-46
changelog:
  - pam_xauth: reintroduce ACL support, per the original white paper
  - pam_xauth: default root's export ACL to none instead of everyone


author: Nalin Dahyabhai <nalin@redhat.com> 0.75-49
changelog:
  - modify calls to getlogin() to check the directory of the current TTY before
    searching for an entry in the utmp/utmpx file (#98020, #98826, CAN-2003-0388)


author: Nalin Dahyabhai <nalin@redhat.com> 0.77-0
changelog:
  - update to 0.77 upstream release
    - pam_limits: limits now affect root as well
    - pam_nologin: returns PAM_IGNORE instead of PAM_SUCCESS unless "successok"
      is given as an argument
    - pam_userdb: correctly return PAM_AUTH_ERR instead of PAM_USER_UNKNOWN when
      invoked with the "key_only" argument and the database has an entry of the
      form "user-<wrongpassword>"
  - use a bundled libdb for pam_userdb.so because the system copy uses threads,
    and demand-loading a shared library which uses threads into an application
    which doesn't is a Very Bad Idea


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pam_succeed_if: fix thinko in argument parsing which would walk past the
    end of the argument list


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make pam_pwdb.so link with libnsl again so that it loads (#107093)
  - remove now-bogus buildprereq on db4-devel (we use a bundled copy for
    pam_userdb to avoid symbol collisions with other db libraries in apps)


author: Nalin Dahyabhai <nalin@redhat.com> 0.77-15
changelog:
  - don't install _pam_aconf.h -- apps don't use it, other PAM headers which
    are installed don't use it, and its contents may be different for arches
    on a multilib system
  - check for linkage problems in modules at %install-time (kill #107093 dead)
  - add buildprereq on flex (#101563)


author: Dan Walsh <dwalsh@redhat.com> 0.77-19.sel
changelog:
  - Change unix_chkpwd to handle unix_passwd and unix_acct
  - This eliminates the need for pam modules to have read/write access to /etc/shadow.


author: Tomas Mraz <tmraz@redhat.com> 0.77-56
changelog:
  - #75454 fixed locking when changing password
  - #127054 
  - #125653 removed unnecessary getgrouplist call
  - #124979 added quiet option to pam_succeed_if


author: Tomas Mraz <tmraz@redhat.com> 0.77-61
changelog:
  - #129328 pam_env shouldn't abort on missing /etc/environment
  - #126985 pam_stack should always copy the conversation function 
  - #127524 add /etc/security/opasswd to files


author: Tomas Mraz <tmraz@redhat.com> 0.77-63
changelog:
  - Fix checking of group %group syntax in pam_limits
  - Drop fencepost patch as it was already fixed 
    by upstream change from 0.75 to 0.77
  - Fix brokenshadow patch


author: Tomas Mraz <tmraz@redhat.com>
changelog:
  - #87628 pam_timestamp remembers authorization after logout
  - #116956 fixed memory leaks in pam_stack


author: Tomas Mraz <tmraz@redhat.com> 0.77-66
changelog:
  - #77646 log failures when renaming the files when changing password
  - Log failure on missing /etc/security/opasswd when remember option is present


author: Tomas Mraz <tmraz@redhat.com> 0.78-1
changelog:
  - update to Linux-PAM-0.78
  - #140451 parse passwd entries correctly and test for failure
  - #137802 allow using pam_console for authentication


author: Tomas Mraz <tmraz@redhat.com> 0.78-5
changelog:
  - echo why tests failed when rebuilding
  - fixed some warnings and errors in pam_console for gcc4 build
  - improved parsing pam_console config file


author: Tomas Mraz <tmraz@redhat.com> 0.78-6
changelog:
  - add functionality for running handler executables from pam_console
    when console lock was obtained/lost
  - removed patches merged to pam-redhat


author: Tomas Mraz <tmraz@redhat.com> 0.78-8
changelog:
  - remove ownership and permissions handling from pam_console call
    pam_console_apply as a handler instead


author: Tomas Mraz <tmraz@redhat.com> 0.78-9
changelog:
  - fix wrong logging in pam_console handlers
  - add executing ainit handler for alsa sound dmix
  - #147879, #112777 - change permissions for dri devices


author: Tomas Mraz <tmraz@redhat.com> 0.79-3
changelog:
  - make pam_unix LSB 2.0 compliant even when SELinux enabled
  - #88127 - change both local and NIS passwords to keep them in sync,
    also fix a regression in passwd functionality on NIS master server


author: Tomas Mraz <tmraz@redhat.com> 0.79-5
changelog:
  - added auditing patch by Steve Grubb
  - added cleanup patches for bugs found by Steve Grubb
  - don't clear the shadow option of pam_unix if nis option used


author: Tomas Mraz <tmraz@redhat.com> 0.79-7
changelog:
  - pam_xauth: unset the XAUTHORITY variable on error, fix
    potential memory leaks
  - modify path to IDE floppy devices in console.perms (#155560)


author: Tomas Mraz <tmraz@redhat.com> 0.79-9
changelog:
  - update the pam audit patch to support newest audit library,
    audit also pam_setcred calls (Steve Grubb)
  - don't use the audit_fd as global static variable
  - don't unset the XAUTHORITY when target user is root


author: Tomas Mraz <tmraz@redhat.com> 0.79-10
changelog:
  - add the Requires dependency on audit-libs (#159885)
  - pam_loginuid shouldn't report error when /proc/self/loginuid
    is missing (#159974)


author: Tomas Mraz <tmraz@redhat.com> 0.80-1
changelog:
  - upgrade to new upstream sources
  - removed obsolete patches
  - pam_selinux module shouldn't fail on broken configs unless
    policy is set to enforcing (Dan Walsh)


author: Tomas Mraz <tmraz@redhat.com> 0.80-2
changelog:
  - fixed module tests so the pam doesn't require itself to build (#163502)
  - added buildprereq for building the documentation (#163503)
  - relaxed permissions of binaries (u+w)


author: Tomas Mraz <tmraz@redhat.com> 0.80-8
changelog:
  - process limit values other than RLIMIT_NICE correctly (#168790)
  - pam_unix: always honor nis flag on password change (by Aaron Hope)


author: Tomas Mraz <tmraz@redhat.com> 0.80-9
changelog:
  - don't include ps and pdf docs (#168823)
  - new common config file for configuration utilities
  - remove glib2 dependency (#166979)


author: Tomas Mraz <tmraz@redhat.com> 0.80-13
changelog:
  - fixed CAN-2005-2977 unix_chkpwd should skip user verification only if
    run as root (#168181)
  - link pam_loginuid to libaudit
  - support no tty in pam_access (#170467)
  - updated audit patch (by Steve Grubb)
  - the previous pam_selinux change was not applied properly
  - pam_xauth: look for the xauth binary in multiple directories (#171164)


author: Tomas Mraz <tmraz@redhat.com> 0.99.2.1-1
changelog:
  - support netgroup matching in pam_succeed_if
  - upgrade to new release
  - drop pam_pwdb as it was obsolete long ago
  - we don't build static libraries anymore


author: Tomas Mraz <tmraz@redhat.com> 0.99.2.1-2
changelog:
  - fix dangling symlinks in -devel (#175929)
  - link libaudit only where necessary
  - actually compile in audit support


author: Tomas Mraz <tmraz@redhat.com> 0.99.3.0-1
changelog:
  - new upstream version
  - updated db4 to 4.3.29
  - added module pam_tally2 with auditing support
  - added manual pages for system-auth and config-util (#179584)


author: Tomas Mraz <tmraz@redhat.com> 0.99.3.0-2
changelog:
  - added try_first_pass option to pam_cracklib
  - use try_first_pass for pam_unix and pam_cracklib in
    system-auth (#182350)


author: Tomas Mraz <tmraz@redhat.com> 0.99.3.0-3
changelog:
  - added pam_namespace module written by Janak Desai (per-user /tmp
  support)
  - new pam-redhat modules version


author: Tomas Mraz <tmraz@redhat.com> 0.99.3.0-4
changelog:
  - fixed console device class for irda (#189966)
  - make pam_console_apply fail gracefully when a class is missing


author: Tomas Mraz <tmraz@redhat.com> 0.99.3.0-5
changelog:
  - the namespace instance init script is now in /etc/security (#190148)
  - pam_namespace: added missing braces (#190026)
  - pam_tally(2): never call fclose twice on the same FILE (from upstream)


author: Tomas Mraz <tmraz@redhat.com> 0.99.4.0-1
changelog:
  - upgrade to new upstream version
  - make pam_console_apply not dependent on glib
  - support large uids in pam_tally, pam_tally2


author: Tomas Mraz <tmraz@redhat.com> 0.99.4.0-2
changelog:
  - pam_console_apply shouldn't access /var when called with -r (#191401)
  - actually apply the large-uid patch
  - don't build hmactest in pam_timestamp so openssl-devel is not required
  - add missing buildrequires (#191915)


author: Tomas Mraz <tmraz@redhat.com> 0.99.4.0-3
changelog:
  - use md5 implementation from pam_unix in pam_namespace
  - pam_namespace should call setexeccon only when selinux is enabled


author: Tomas Mraz <tmraz@redhat.com> 0.99.4.0-5
changelog:
  - updated pam_namespace with latest patch by Janak Desai
  - merged pam_namespace patches
  - added buildrequires libtool
  - fixed a few rpmlint warnings


author: Tomas Mraz <tmraz@redhat.com> 0.99.5.0-1
changelog:
  - updated to a new upstream release
  - added service as value to be matched and list matching to
    pam_succeed_if
  - namespace.init was missing from EXTRA_DIST


author: Tomas Mraz <tmraz@redhat.com> 0.99.5.0-3
changelog:
  - don't report error in pam_selinux for nonexistent tty (#188722)
  - add pam_keyinit to the default system-auth file (#198623)


author: Tomas Mraz <tmraz@redhat.com> 0.99.5.0-6
changelog:
  - revoke keyrings properly when pam_keyinit called more than once (#201048)
    patch by David Howells


author: Tomas Mraz <tmraz@redhat.com> 0.99.5.0-7
changelog:
  - revoke keyrings properly when pam_keyinit called as root (#201048)
  - pam_succeed_if should return PAM_USER_UNKNOWN when getpwnam fails (#197748)


author: Tomas Mraz <tmraz@redhat.com> 0.99.6.2-1
changelog:
  - upgrade to new upstream version, as there are mostly bugfixes except
    improved documentation
  - add support for session and password service for pam_access and
    pam_succeed_if
  - system-auth: skip session pam_unix for crond service


author: Tomas Mraz <tmraz@redhat.com> 0.99.6.2-2
changelog:
  - silence pam_succeed_if in default system-auth (#205067)
  - round the pam_timestamp_check sleep up to wake up at the start of the
    wallclock second (#205068)


author: Tomas Mraz <tmraz@redhat.com> 0.99.6.2-3.1
changelog:
  - preserve effective uid in namespace.init script (LSPP for newrole)
  - include /var/log/faillog and tallylog to filelist (#209646)
  - add ids to .xml docs so the generated html is always the same (#210569)


author: Tomas Mraz <tmraz@redhat.com> 0.99.6.2-4
changelog:
  - update internal db4 to 4.5.20 version
  - move setgid before setuid in pam_keyinit (#212329)
  - make username check in pam_unix consistent with useradd (#212153)


author: Tomas Mraz <tmraz@redhat.com> 0.99.6.2-5
changelog:
  - add select-context option to pam_selinux (#213812)
  - autoreconf won't work with autoconf-2.61 as configure.in is not yet adjusted
    for it


author: Tomas Mraz <tmraz@redhat.com> 0.99.6.2-8
changelog:
  - properly include /var/log/faillog and tallylog as ghosts
    and create them in post script (#209646)
  - update gmo files as we patch some po files (#218271)
  - add use_current_range option to pam_selinux (#220487)
  - improve the role selection in pam_selinux
  - remove shortcut on Password: in ja locale (#218271)
  - revert to old euid and not ruid when setting euid in pam_keyinit (#219486)
  - rename selinux-namespace patch to namespace-level


author: Tomas Mraz <tmraz@redhat.com> 0.99.7.0-1
changelog:
  - upgrade to new upstream version
  - drop pam_stack module as it is obsolete
  - some changes to silence rpmlint


author: Tomas Mraz <tmraz@redhat.com> 0.99.7.1-1
changelog:
  - upgrade to new upstream version resolving CVE-2007-0003
  - pam_namespace: unmount poly dir for override users


author: Tomas Mraz <tmraz@redhat.com> 0.99.7.1-3
changelog:
  - correctly relabel tty in the default case (#229542)
  - pam_unix: cleanup of bigcrypt support
  - pam_unix: allow modification of '*' passwords to root


author: Tomas Mraz <tmraz@redhat.com> 0.99.7.1-4
changelog:
  - pam_console: always decrement use count (#230823)
  - pam_namespace: use raw context for poly dir name (#227345)
  - pam_namespace: truncate long poly dir name (append hash) (#230120)
  - we don't patch any po files anymore


author: Tomas Mraz <tmraz@redhat.com> 0.99.7.1-5
changelog:
  - pam_selinux: improve context change auditing (#234781)
  - pam_namespace: fix parsing config file with unknown users (#234513)


author: Tomas Mraz <tmraz@redhat.com> 0.99.7.1-6
changelog:
  - pam_namespace: better document behavior on failure (#237249)
  - pam_unix: split out passwd change to a new helper binary (#236316)
  - pam_namespace: add support for temporary logons (#241226)


author: Tomas Mraz <tmraz@redhat.com> 0.99.8.1-3
changelog:
  - updated db4 to 4.6.18 (#249740)
  - added user and new instance parameters to namespace init
  - document the new features of pam_namespace
  - do not log an audit error when uid != 0 (#249870)


author: Tomas Mraz <tmraz@redhat.com> 0.99.8.1-5
changelog:
  - most devices are now handled by HAL and not pam_console (patch by davidz)
  - license tag fix
  - multifunction scanner device support (#251468)


author: Tomas Mraz <tmraz@redhat.com> 0.99.8.1-6
changelog:
  - do not ask for blank password when SELinux confined (#254044)
  - initialize homedirs in namespace init script (original patch by dwalsh)


author: Tomas Mraz <tmraz@redhat.com> 0.99.8.1-9
changelog:
  - do not preserve contexts when copying skel and other namespace.init
    fixes (#298941)
  - do not free memory sent to putenv (#231698)


author: Tomas Mraz <tmraz@redhat.com> 0.99.8.1-17
changelog:
  - test for setkeycreatecon correctly
  - add exclusive login mode of operation to pam_selinux_permit (original
    patch by Dan Walsh)


author: Tomas Mraz <tmraz@redhat.com> 0.99.10.0-1
changelog:
  - new upstream release
  - add default soft limit for nproc of 1024 to prevent
    accidental fork bombs (#432903)


author: Tomas Mraz <tmraz@redhat.com> 0.99.10.0-2
changelog:
  - if shadow is readable for an user do not prevent him from
    authenticating any user with unix_chkpwd (#433459)
  - call audit from unix_chkpwd when appropriate


author: Tomas Mraz <tmraz@redhat.com> 0.99.10.0-4
changelog:
  - pam_namespace: fix problem with level polyinst (#438264)
  - pam_namespace: improve override checking for umount
  - pam_selinux: fix syslogging a context after free() (#438338)


author: Tomas Mraz <tmraz@redhat.com> 1.0.1-4
changelog:
  - pam_namespace: allow safe creation of directories owned by user (#437116)
  - pam_unix: fix multiple error prompts on password change (#443872)


author: Tomas Mraz <tmraz@redhat.com> 1.0.2-1
changelog:
  - pam_loginuid: uids are unsigned (#460241)
  - new minor upstream release
  - use external db4
  - drop tests for not pulling in libpthread (as NPTL should
    be safe)


author: Tomas Mraz <tmraz@redhat.com> 1.0.2-2
changelog:
  - new password quality checks in pam_cracklib
  - report failed logins from btmp in pam_lastlog
  - allow larger groups in modutil functions
  - fix leaked file descriptor in pam_tally


author: Tomas Mraz <tmraz@redhat.com> 1.0.90-4
changelog:
  - fix parsing of config files containing non-ASCII characters
  - fix CVE-2009-0579 (mininimum days for password change ignored) (#487216)
  - pam_access: improve handling of hostname resolution


author: Tomas Mraz <tmraz@redhat.com> 1.0.91-6
changelog:
  - add password-auth, fingerprint-auth, and smartcard-auth
    for applications which can use them namely gdm (#494874)
    patch by Ray Strode


author: Tomas Mraz <tmraz@redhat.com> 1.1.0-5
changelog:
  - do not change permissions with pam_console_apply
  - drop obsolete pam_tally module and the faillog file (#461258)


author: Tomas Mraz <tmraz@redhat.com> 1.1.0-7
changelog:
  - pam_console: fix memory corruption when executing handlers (patch by
    Stas Sergeev) and a few more fixes in the handler execution code (#532302)


author: Tomas Mraz <tmraz@redhat.com> 1.1.1-5
changelog:
  - fix insecure dropping of priviledges in pam_xauth, pam_env,
    and pam_mail - CVE-2010-3316 (#637898), CVE-2010-3435 (#641335)
  - fix insecure executing of scripts with user supplied environment
    variables in pam_namespace - CVE-2010-3853 (#643043)


author: Tomas Mraz <tmraz@redhat.com> 1.1.1-6
changelog:
  - do not overwrite /var/log/tallylog on package update (#614766)
  - add support for uid and gid ranges in limits.conf (#622847)
  - add new pam_faillock module (#644971)


author: Tomas Mraz <tmraz@redhat.com> 1.1.1-7
changelog:
  - fix a few memory leaks in error paths and other mistakes
    found by a code review
  - add rhost and tty to auditing data in modules (#677664)


author: Tomas Mraz <tmraz@redhat.com> 1.1.1-12
changelog:
  - add character sequence test to pam_cracklib
  - drop unused difignore option from pam_cracklib (#811243)
  - add enforce_for_root option to pam_cracklib (#588893)
  - mention limits.d in the limits.conf(5) manpage (#723297)
  - add ability to lock out inactive accounts to pam_lastlog
  - fix require_selinux option in pam_namespace (#750601)
  - add mntopts flag for tmpfs polyinstantiation method
  - preserve authtok_type in pam_get_authtok() (#811168)
  - fix username mismatch in pam_unix remember feature (#815516)
  - relax restriction of root in pam_pwhistory
  - relax soft nproc limit for root in 90-nproc.conf


author: Tomas Mraz <tmraz@redhat.com> 1.1.1-18
changelog:
  - pam_cracklib: improve documentation (#889233)
  - unbreak authentication if ld.so.preload is not empty
  - correct off by one error in account expiration calculation (#947011)
  - pam_console_apply: do not print error if console.perms.d is empty
  - properly handle all cases where crypt() might return NULL (#1026203)
  - pam_limits: clarify documentation of maxsyslogins limit (#1028490)
  - pam_access: call DNS resolution only when necessary and cache
    results (#1029817)
  - pam_limits: nofile applies to file descriptors not files (#1040664)
  - pam_limits: check whether the utmp login entry is valid (#1054936)
  - correct URLs in spec file (#1071770)
  - pam_userdb: correct the example in man page (#1078779)
  - pam_selinux: canonicalize username for getseuser() (#1083981)
  - pam_access: fix netgroup matching and @user@@netgroup parsing (#740233)


author: Chris Feist <cfeist@redhat.com> - 0.9.26-6
changelog:
  - Added additional specific steps for configuring pcs on Red Hat Enterprise
    Linux 6
  - Resolves: rhbz#878682


author: Chris Feist <cfeist@redhat.com> - 0.9.26-9
changelog:
  - pcs now allows assigning constraints to group/clone/multistate resources
  - pcs no longer deletes resources from the lrm during resource removal
  - Resolves: rhbz#894174 rhbz#893221


author: Chris Feist <cfeist@redhat.com> - 0.9.26-10
changelog:
  - Removed one extra place where pcs incorrectly deleted resources from the lrm
  - Resolves: rhbz#893221


author: Chris Feist <cfeist@redhat.com> - 0.9.73-1
changelog:
  - Cluster name is now viewable on RHEL 6
  - Cluster.conf is now removed on destroy
  - Misc man page & usage updates
  - When removing the last resource from a group, remove any constraints still
    remaining on group


author: Chris Feist <cfeist@redhat.com> - 0.9.74-1
changelog:
  - pcs cluster edit should now work properly
  - Allow removal of group and resources inside group with
    pcs resource delete <group name>


author: Chris Feist <cfeist@redhat.com> - 0.9.75-1
changelog:
  - Removing a resource that is part of a resource set is now allowed
  - When you try to remove a group from a master that has more than one
    resource you now recieve a helpful error
  - Unclone works on clones where constraints have been added
  - Removing a group with constraints now works properly
  - Master/Slave groups now have constraints properly removed before being
    deleted


author: Chris Feist <cfeist@redhat.com> - 0.9.76-1
changelog:
  - Renamed resource group remove/delete to ungroup
  - Fixed moving resource masters
  - Allow cloing/mastering last resource in a group


author: Chris Feist <cfeist@redhat.com> - 0.9.77-1
changelog:
  - Fixed managing/unmanaging groups/clones/masters of resources
  - Fixed issue when using --group when creating a resource


author: Chris Feist <cfeist@redhat.com> - 0.9.78-1
changelog:
  - Fixed error codes and stdout/stderr output on errors from pcs resource
    enable/disable
  - Automatically add interval to operations which don't specify an interval


author: Chris Feist <cfeist@redhat.com> - 0.9.79-1
changelog:
  - Fixed OCF_CHECK_LEVEL operation setting in resource update
  - Return proper error codes when stopping/starting/enable/disabling resources
  - Return proper error code on auth


author: Chris Feist <cfeist@redhat.com> - 0.9.80-1
changelog:
  - More fixes for OCF_CHECK_LEVEL issues
  - Fix traceback when adding a resourcew with a provider that doesn't exist
  - Create proper two_node cluster when only two nodes are specified in cluster
    setup
  - Give useful error when bad options are used with 'op'


author: Chris Feist <cfeist@redhat.com> - 0.9.81-1
changelog:
  - Fix issues when updating resource with multiple operations with the same
    action
  - Fixed constraint rules and improved usage documentation


author: Chris Feist <cfeist@redhat.com> - 0.9.82-1
changelog:
  - Show constraint id when printing out location rules
  - Improve error messages when adding location rules with errors
  - Add ability to remove constraint rules
  - Allow move of master/slave resources if --master is present


author: Chris Feist <cfeist@redhat.com> - 0.9.87-1
changelog:
  - Allow two ordering constraints with same resources
  - Improved error messages when trying to master/clone resources
  - Updated error message when attempting to move a master/slave without
    --master


author: Chris Feist <cfeist@redhat.com> - 0.9.88-1
changelog:
  - Don't allow order/colocation constraints created for master primitives
  - Check in clones for stonith resources
  - Clarify 'constraint rule add' in man page/usage
  - Fixed minor usage issue with colocation sets


author: Chris Feist <cfeist@redhat.com> - 0.9.89-1
changelog:
  - Show location constraint role in pcs status/constraint
  - Disable resource before removing
  - Misc man/usage fixes


author: Chris Feist <cfeist@redhat.com> - 0.9.90-1
changelog:
  - Add ability to set node attributes
  - Fix issue setting meta attributes on a master when creating a resource


author: Chris Feist <cfeist@redhat.com> - 0.9.101-1
changelog:
  - Rebase for new features
  - Added ability to set uidgid in cluster.conf
  - Stonith level add now properly recognizes nodes
  - Resolves: rhbz#1025053 rhbz#1019410


author: Chris Feist <cfeist@redhat.com> - 0.9.101-3
changelog:
  - When creating a resource using --group/--clone/--master put the group
    inside the master/clone/group before putting it into the live CIB
  - Resolves: rhbz#1066927


author: Chris Feist <cfeist@redhat.com> - 0.9.118-2
changelog:
  - Re-synced to upstream sources
  - Fixed dependency on rubygems
  - Fixed pam long timeouts due to fprintd
  - Resolves: rhbz#1102836


author: Chris Feist <cfeist@redhat.com> - 0.9.120-2
changelog:
  - Use /usr/sbin/pcs for pcs instead of /sbin/pcs
  - Use Open4 instead of POpen4 for running commands
  - Fixed cluster setup for RHEL6
  - Resolves: rhbz#1102836


author: Chris Feist <cfeist@redhat.com> - 0.9.121-1
changelog:
  - Don't try to get metadata for fence_check, fence_tool & fence_node
  - Cloned M/S groups can now be deleted
  - Clone options can now follow --clone
  - Cloned resources with globally-unique=true can now be deleted
  - Resolves: rhbz#1102836


author: Chris Feist <cfeist@redhat.com> - 0.9.123-3
changelog:
  - Added ability to upgrade cluster cib and we auto upgrade cib if we're running
    an acl command (except show or help)
  - Resolves: rhbz#1112727


author: Chris Feist <cfeist@redhat.com> - 0.9.123-4
changelog:
  - Fixed resource delete for clones of groups with more than one resource
  - Fixed unclone of group so all resources are removed
  - Resolves: rhbz#1107612 rhbz#1108778


author: Chris Feist <cfeist@redhat.com> - 0.9.123-6
changelog:
  - Fixed issue with sync cluster.conf & adding uid/gid across cluster on RHEL6 w/ pcsd
  - Resolves: rhbz#1102836


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.138-1
changelog:
  - Rebased to latest upstream packages
  - Fixed creating default resource operations
  - Added support for RRP and corosync options for cman based clusters
  - Allowed scope=configuration in cib commands
  - Added support for configuring a cluster remotely using pcsd
  - Fixed globally-unique clone resources in pcsd
  - Added resource location to resources / stonith devices list
  - Fixed formatting of resource / fence agent description
  - Fence agent description now contains information about the agent
  - Parallelized cluster start and cluster stop
  - Added warning when nodes stop will cause a loss of the quorum
  - pcs status --full now displays Node attributes and Migration summary
  - Resolves: rhbz#1185738 rhbz#1031141 rhbz#1121769 rhbz#1126835 rhbz#1160359 rhbz#1168986 rhbz#1174244 rhbz#1174793 rhbz#1174798 rhbz#1174801 rhbz#1184763 rhbz#1184922


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.139-1
changelog:
  - Rebased to latest upstream packages
  - Fixed constraints removal and node standby/unstandby using remote GUI
  - Fixed displaying of fence / resource agent metadata in GUI
  - Added Pacemaker Resource defaults and Op defaults to 'pcs config' output
  - Fixed 'pcs resource clear' used on cloned group
  - Added support for scope option in cib commands
  - Added warning when creating a cluster with UDPU transport
  - Reload cluster.conf after node addition / removal
  - Resolves: rhbz#1185738 rhbz#1168982 rhbz#1174793 rhbz#1187488 rhbz#1190167 rhbz#1190168 rhbz#1191898 rhbz#1193433


author: Tomas Jelinek <tojeline@redhat.com> - 0.9.139-9.el6_7.1
changelog:
  - Fixed session and cookies processing
  - Fixed command injection vulnerability
  - Resolves: rhbz#1253287 rhbz#1253291


author: Tom "spot" Callaway <tcallawa@redhat.com> - 4:5.10.0-1
changelog:
  - 5.10.0 final
  - clear out all the unnecessary patches (down to 8 patches!)
  - get rid of super perl debugging mode
  - add new subpackages


author: Tom "spot" Callaway <tcallawa@redhat.com> - 4:5.10.0-4
changelog:
  - create %{_prefix}/lib/perl5/vendor_perl/%{perl_version}/auto and own it
    in base perl (resolves bugzilla 214580)


author: Tom "spot" Callaway <tcallawa@redhat.com> - 4:5.10.0-5
changelog:
  - disable some futime tests in t/io/fs.t because they started failing on x86_64
    in the Fedora builders, and no one can figure out why. :/


author: Stepan Kasal <skasal@redhat.com> - 4:5.10.0-7
changelog:
  - Add perl-File-Temp provides/obsoletes/conflicts (#433836),
    reported by Bill McGonigle <bill@bfccomputing.com>
  - escape the macros in Jan 30 entry


author: Tom "spot" Callaway <tcallawa@redhat.com> 4:5.10.0-12
changelog:
  - conditionalize multilib patch report in patchlevel.h
  - Update Archive::Extract to 0.26
  - Update Module::Load::Conditional to 0.24


author: Tom "spot" Callaway <tcallawa@redhat.com> 4:5.10.0-19
changelog:
  - fix CPANPLUS-Dist-Build Provides/Obsoletes (bz 437615)
  - bump version on Module-CoreList subpackage


author: Tom "spot" Callaway <tcallawa@redhat.com> 4:5.10.0-20
changelog:
  - create the vendor_perl/%{perl_version}/%{perl_archname}/auto directory 
    in %{_libdir} so we own it properly


author: Tom "spot" Callaway <tcallawa@redhat.com> 4:5.10.0-21
changelog:
  - sparc64 fails two tests under mysterious circumstances. we need to get the
    rest of the tree moving, so we temporarily disable the tests on that arch.


author: Stepan Kasal <skasal@redhat.com> 4:5.10.0-26
changelog:
  - make config parameter list consistent for 32bit and 64bit platforms,
    add config option -Dinc_version_list=none (#448735)
  - use perl_archname consistently
  - cleanup of usage of *_lib macros in %install


author: Marcela Maslanova <mmaslano@redhat.com> 4:5.10.0-33
changelog:
  - 451078 update Test::Harness to 3.12 for more testing. Removed verbose 
  test, new Test::Harness has possibly verbose output, but updated package
  has a lot of features f.e. TAP::Harness. Carefully watched all new bugs 
  related to tests!


author: Marcela Maslanova <mmaslano@redhat.com> 4:5.10.0-38
changelog:
  - 455933 update to CGI-3.38
  - fix fuzz problems (patch6)
  - 217833 pos() function handle unicode characters correct


author: Stepan Kasal <skasal@redhat.com> 4:5.10.0-39.fc10
changelog:
  - CGI.pm bug in exists() on tied param hash (#457085)
  - move the enc2xs templates (../Encode/*.e2x) to -devel, (#456534)


author: Marcela Maslanova <mmaslano@redhat.com> 4:5.10.0-44.fc10
changelog:
  - remove Tar.pm from Archive-Extract
  - fix version of Test::Simple in spec
  - update Test::Simple
  - update Archive::Tar to 1.38


author: Stepan Kasal <skasal@redhat.com> - 4:5.10.0-46
changelog:
  - also preserve the timestamp of AUTHORS; move the fix to the recode
    function, which is where the stamps go wrong


author: Marcela Mašláňová <mmaslano@redhat.com> 4:5.10.0-47.fc10
changelog:
  - rt#33242, rhbz#459918. Segfault after reblessing objects in Storable.
  - rhbz#465728 upgrade Simple::Pod to 3.07


author: Tom "spot" Callaway <tcallawa@redhat.com> - 4:5.10.0-51
changelog:
  - to fix Fedora bz 473223, which is really perl bug #54186 (http://rt.perl.org/rt3//Public/Bug/Display.html?id=54186)
    we apply Changes 33640, 33881, 33896, 33897


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.0-52
changelog:
  - 295021 CVE-2007-4829 perl-Archive-Tar directory traversal flaws
  - add another source for binary files, which test untaring links


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.0-54
changelog:
  - 455410 http://rt.perl.org/rt3/Public/Bug/Display.html?id=54934
    Attempt to free unreferenced scalar fiddling with the symbol table
    Keep the refcount of the globs generated by PerlIO::via balanced.


author: Stepan Kasal <skasal@redhat.com> - 4:5.10.0-60
changelog:
  - remove compatibility obsolete sitelib directories
  - use a better BuildRoot
  - drop a redundant mkdir in %install
  - call patchlevel.h only once; rm patchlevel.bak
  - update modules Sys::Syslog, Module::Load::Conditional, Module::CoreList,
    Test::Harness, Test::Simple, CGI.pm (dropping the upstreamed patch),
    File::Path (that includes our perl-5.10.0-CVE-2008-2827.patch),
    constant, Pod::Simple, Archive::Tar, Archive::Extract, File::Fetch,
    File::Temp, IPC::Cmd, Time::HiRes, Module::Build, ExtUtils::CBuilder
  - standardize the patches for updating embedded modules
  - work around a bug in Module::Build tests bu setting TMPDIR to a directory
    inside the source tree


author: Tom "spot" Callaway <tcallawa@redhat.com> - 4:5.10.0-61
changelog:
  - apply Change 34507: Fix memory leak in single-char character class optimization
  - Reorder @INC, based on b9ba2fadb18b54e35e5de54f945111a56cbcb249
  - fix Archive::Extract to fix test failure caused by tar >= 1.21
  - Merge useful Debian patches


author: Stepan Kasal <skasal@redhat.com> - 4:5.10.0-66
changelog:
  - fix CGI::escape for all strings (#472571)
  - perl-CGI-t-util-58.patch: Do not distort lib/CGI/t/util-58.t
    http://rt.perl.org/rt3/Ticket/Display.html?id=64502


author: Stepan Kasal <skasal@redhat.com> - 4:5.10.0-74
changelog:
  - fix generated .ph files so that they no longer cause warnings (#509676)
  - remove PREREQ_FATAL from Makefile.PL's processed by miniperl
  - update to latest Scalar-List-Utils (#507378)
  - perl-skip-prereq.patch: skip more prereq declarations in Makefile.PL files


author: Chris Weyl <cweyl@alumni.drew.edu> - 4:5.10.0-82
changelog:
  - update our Test-Simple update to 0.92 (patch by Iain Arnell), #519417
  - update Module-Pluggable to 3.9


author: Stepan Kasal <skasal@redhat.com> - 4:5.10.0-87
changelog:
  - fix patch-update-Compress-Raw-Zlib.patch (did not patch Zlib.pm)
  - update Compress::Raw::Zlib to 2.023
  - update IO::Compress::Base, and IO::Compress::Zlib to 2.015 (#542645)


author: Stepan Kasal <skasal@redhat.com> - 4:5.10.1-100
changelog:
  - new upstream version
  - release number must be high, because of stale version numbers of some
    of the subpackages
  - drop upstreamed patches
  - update the versions of bundled modules
  - shorten the paths in @INC
  - build without DEBUGGING
  - implement compatibility measures for the above two changes, for a short
    transition period
  - provide perl(:MODULE_COMPAT_5.10.0), for that transition period only


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.1-105
changelog:
  - 547657 CVE-2009-3626 perl: regexp matcher crash on invalid UTF-8 characters  
  - 549306 version::Internals should be packaged in perl-version subpackage
  - Parse-CPAN-Meta updated and separate package is dead
  - subpackage parent and Parse-CPAN-Meta; add them to core's dep list
  - exclude "parent".
  - exclude Parse-CPAN-Meta.
  Resolves: rhbz#547657


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.1-106
changelog:
  - 554654 -  "perldoc perlvar" renders incorrectly in C and en_US.UTF-8 locales.
  - 554666 -  Wrong man pages location specified in perl manual page
  - Resolves: rhbz#554654, rhbz#554666


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.1-107
changelog:
  - clean spec - remove unused patches, rename patches, sources
  - add releases macros for all modules
  - change license according to legal
  - update modules to stable version. e.g. Module-Build can't be updated anymore
    because of API breakage, that's true also for some other modules.
  - Related: rhbz#543948


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.1-108
changelog:
  - remove DPERL_USE_SAFE_PUTENV from Configure #577229 Use perl internal
   putenv, which doesn't leak memory.
  - 580238 wrong version of module
  Resolves: rhbz#580238


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.1-110
changelog:
  - 597982 add all version* in -version sub-package
  - Resolves: rhbz#597982, rhbz#598397, rhbz#595387, rhbz#595387


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.1-110
changelog:
  - set CPAN installation path into "site"
  - 'make local' now pass because of Patch0, which removes incorectly set
   dependencies
  - Related: rhbz#594768


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.1-111
changelog:
  - fix conflicts in specfile, upload missing sources, upload patch with
   wrong name
  - Related: rhbz# 594768


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-113
changelog:
  - fix CGI test data location to pass internal tests 
  - remove CPAN and CPANPLUS sysconfig declarations as they are not provided
  - disable tests on s390(x) and ppc64 as multithread stress tests fails
  - Related: rhbz#594768


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-114
changelog:
  - Remove unused @INC paths
  - Own all used @INC paths
  - Own architecture dependent paths by perl-libs due to multiarch
  - Resolves: rhbz#554671


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.1-116
changelog:
  - require Digest::SHA 640716
  - remove removal of NDBM 640729
  - remove unsupported option fork from prove's documentation 609492
  - Thread desctructor leaks 640720
  - update threads to 1.82 (bugfixes releases) 626330
  - remove unused patches from cvs
  - Resolves: rhbz#640729, rhbz#640716, rhbz#609492, rhbz#640720, rhbz#626330


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.1-119
changelog:
  - 692862 - lc launders tainted flag, CVE-2011-1487
  - make SOURCE1 executable, because it missed +x in brew
  - Resolves: rhbz#692862


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:5.10.1-120
changelog:
  - 731246 (CVE-2011-2939)CVE-2011-2939 heap overflow - decoding Unicode string
  - 743010 - perl: code injection vulnerability in Digest->new()
  - Resolves: rhbz#743093, rhbz#743091


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-122
changelog:
  - Resolves: rhbz#738421 - Package bzip2 modules
  - Resolves: rhbz#750145 - Add require EE::MM into IPC::Cmd


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-130
changelog:
  - Resolves: #915693 - CVE-2012-5526 (newline injection due to improper CRLF
    escaping in Set-Cookie and P3P headers)
  - Resolves: #915693 - CVE-2012-6329 (possible arbitrary code execution via
    Locale::Maketext)
  - Resolves: #915693 - CVE-2013-1667 (DoS in rehashing code)


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-132
changelog:
  - Resolves: #767608 - Fix memory leak when accessing non-matched named
    capturing groups
  - Resolves: #839788 - Do not crash if declared DESTROY method has not been
    defined


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-133
changelog:
  - Resolves: #698552 - Correct taintedness tests
  - Resolves: #825713 - Fix find2perl to translate ? glob properly
  - Resolves: #810469 - Upgrade IO-Compress, Compress-Raw-Bzip2, and
    Compress-Raw-Zlib to 2.021
  - Resolves: #819042 - Set default output for Pod::Man and Pod::Text
    parse_file() methods
  - Resolves: #905482 - Require glibc-devel, gdbm-devel, db4-devel by perl-devel


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-134
changelog:
  - Resolves: #973022 - Make non-option handler for Getopt::Long::GetOptions()
    compatible with XML::Simple


author: Petr Pisar <ppisar@redhat.com> - 4:5.10.1-138
changelog:
  - Fix backslash interpolation in Locale::Maketext (bug #1025906)
  - Do not ignore single-letter-named packages by Module::Plugable (bug #1086215)
  - Run-require exact version of perl-libs by perl-suidperl (bug #1161170)


author: Tom Callaway <tcallawa@redhat.com>
changelog:
  - bump to 5.0.0
  - add patch to prevent clobbering struct re_registers from regex.h
  - remove domxml references, replaced with dom now built-in
  - fix php.ini to refer to php5 not php4


